[PATCH 3/4] mpt3sas: Replace readl with ioc->base_readl.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Use ioc->base_readl to restrict the readl retries to only
Aero controllers.

Signed-off-by: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c | 39 +++++++++++++++++++------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index d371c8e..8a0851e 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -742,7 +742,7 @@ mpt3sas_halt_firmware(struct MPT3SAS_ADAPTER *ioc)
 
 	dump_stack();
 
-	doorbell = readl(&ioc->chip->Doorbell);
+	doorbell = ioc->base_readl(&ioc->chip->Doorbell);
 	if ((doorbell & MPI2_IOC_STATE_MASK) == MPI2_IOC_STATE_FAULT)
 		mpt3sas_base_fault_info(ioc , doorbell);
 	else {
@@ -1351,10 +1351,10 @@ _base_mask_interrupts(struct MPT3SAS_ADAPTER *ioc)
 	u32 him_register;
 
 	ioc->mask_interrupts = 1;
-	him_register = readl(&ioc->chip->HostInterruptMask);
+	him_register = ioc->base_readl(&ioc->chip->HostInterruptMask);
 	him_register |= MPI2_HIM_DIM + MPI2_HIM_RIM + MPI2_HIM_RESET_IRQ_MASK;
 	writel(him_register, &ioc->chip->HostInterruptMask);
-	readl(&ioc->chip->HostInterruptMask);
+	ioc->base_readl(&ioc->chip->HostInterruptMask);
 }
 
 /**
@@ -1368,7 +1368,7 @@ _base_unmask_interrupts(struct MPT3SAS_ADAPTER *ioc)
 {
 	u32 him_register;
 
-	him_register = readl(&ioc->chip->HostInterruptMask);
+	him_register = ioc->base_readl(&ioc->chip->HostInterruptMask);
 	him_register &= ~MPI2_HIM_RIM;
 	writel(him_register, &ioc->chip->HostInterruptMask);
 	ioc->mask_interrupts = 0;
@@ -4880,7 +4880,7 @@ mpt3sas_base_get_iocstate(struct MPT3SAS_ADAPTER *ioc, int cooked)
 {
 	u32 s, sc;
 
-	s = readl(&ioc->chip->Doorbell);
+	s = ioc->base_readl(&ioc->chip->Doorbell);
 	sc = s & MPI2_IOC_STATE_MASK;
 	return cooked ? sc : s;
 }
@@ -4936,7 +4936,7 @@ _base_wait_for_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
 	count = 0;
 	cntdn = 1000 * timeout;
 	do {
-		int_status = readl(&ioc->chip->HostInterruptStatus);
+		int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus);
 		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
 			dhsprintk(ioc,
 				  ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
@@ -4962,7 +4962,7 @@ _base_spin_on_doorbell_int(struct MPT3SAS_ADAPTER *ioc, int timeout)
 	count = 0;
 	cntdn = 2000 * timeout;
 	do {
-		int_status = readl(&ioc->chip->HostInterruptStatus);
+		int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus);
 		if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
 			dhsprintk(ioc,
 				  ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
@@ -5000,14 +5000,14 @@ _base_wait_for_doorbell_ack(struct MPT3SAS_ADAPTER *ioc, int timeout)
 	count = 0;
 	cntdn = 1000 * timeout;
 	do {
-		int_status = readl(&ioc->chip->HostInterruptStatus);
+		int_status = ioc->base_readl(&ioc->chip->HostInterruptStatus);
 		if (!(int_status & MPI2_HIS_SYS2IOC_DB_STATUS)) {
 			dhsprintk(ioc,
 				  ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
 					   __func__, count, timeout));
 			return 0;
 		} else if (int_status & MPI2_HIS_IOC2SYS_DB_STATUS) {
-			doorbell = readl(&ioc->chip->Doorbell);
+			doorbell = ioc->base_readl(&ioc->chip->Doorbell);
 			if ((doorbell & MPI2_IOC_STATE_MASK) ==
 			    MPI2_IOC_STATE_FAULT) {
 				mpt3sas_base_fault_info(ioc , doorbell);
@@ -5042,7 +5042,7 @@ _base_wait_for_doorbell_not_used(struct MPT3SAS_ADAPTER *ioc, int timeout)
 	count = 0;
 	cntdn = 1000 * timeout;
 	do {
-		doorbell_reg = readl(&ioc->chip->Doorbell);
+		doorbell_reg = ioc->base_readl(&ioc->chip->Doorbell);
 		if (!(doorbell_reg & MPI2_DOORBELL_USED)) {
 			dhsprintk(ioc,
 				  ioc_info(ioc, "%s: successful count(%d), timeout(%d)\n",
@@ -5157,13 +5157,13 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	__le32 *mfp;
 
 	/* make sure doorbell is not in use */
-	if ((readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
+	if ((ioc->base_readl(&ioc->chip->Doorbell) & MPI2_DOORBELL_USED)) {
 		ioc_err(ioc, "doorbell is in use (line=%d)\n", __LINE__);
 		return -EFAULT;
 	}
 
 	/* clear pending doorbell interrupts from previous state changes */
-	if (readl(&ioc->chip->HostInterruptStatus) &
+	if (ioc->base_readl(&ioc->chip->HostInterruptStatus) &
 	    MPI2_HIS_IOC2SYS_DB_STATUS)
 		writel(0, &ioc->chip->HostInterruptStatus);
 
@@ -5206,7 +5206,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 	}
 
 	/* read the first two 16-bits, it gives the total length of the reply */
-	reply[0] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+	reply[0] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell)
 	    & MPI2_DOORBELL_DATA_MASK);
 	writel(0, &ioc->chip->HostInterruptStatus);
 	if ((_base_wait_for_doorbell_int(ioc, 5))) {
@@ -5214,7 +5214,7 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 			__LINE__);
 		return -EFAULT;
 	}
-	reply[1] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+	reply[1] = le16_to_cpu(ioc->base_readl(&ioc->chip->Doorbell)
 	    & MPI2_DOORBELL_DATA_MASK);
 	writel(0, &ioc->chip->HostInterruptStatus);
 
@@ -5225,9 +5225,10 @@ _base_handshake_req_reply_wait(struct MPT3SAS_ADAPTER *ioc, int request_bytes,
 			return -EFAULT;
 		}
 		if (i >=  reply_bytes/2) /* overflow case */
-			readl(&ioc->chip->Doorbell);
+			ioc->base_readl(&ioc->chip->Doorbell);
 		else
-			reply[i] = le16_to_cpu(readl(&ioc->chip->Doorbell)
+			reply[i] = le16_to_cpu(
+			    ioc->base_readl(&ioc->chip->Doorbell)
 			    & MPI2_DOORBELL_DATA_MASK);
 		writel(0, &ioc->chip->HostInterruptStatus);
 	}
@@ -6053,14 +6054,14 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
 		if (count++ > 20)
 			goto out;
 
-		host_diagnostic = readl(&ioc->chip->HostDiagnostic);
+		host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic);
 		drsprintk(ioc,
 			  ioc_info(ioc, "wrote magic sequence: count(%d), host_diagnostic(0x%08x)\n",
 				   count, host_diagnostic));
 
 	} while ((host_diagnostic & MPI2_DIAG_DIAG_WRITE_ENABLE) == 0);
 
-	hcb_size = readl(&ioc->chip->HCBSize);
+	hcb_size = ioc->base_readl(&ioc->chip->HCBSize);
 
 	drsprintk(ioc, ioc_info(ioc, "diag reset: issued\n"));
 	writel(host_diagnostic | MPI2_DIAG_RESET_ADAPTER,
@@ -6073,7 +6074,7 @@ _base_diag_reset(struct MPT3SAS_ADAPTER *ioc)
 	for (count = 0; count < (300000000 /
 		MPI2_HARD_RESET_PCIE_SECOND_READ_DELAY_MICRO_SEC); count++) {
 
-		host_diagnostic = readl(&ioc->chip->HostDiagnostic);
+		host_diagnostic = ioc->base_readl(&ioc->chip->HostDiagnostic);
 
 		if (host_diagnostic == 0xFFFFFFFF)
 			goto out;
-- 
1.8.3.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux