RE: [PATCH 0/3] scsi: ufs-bsg: Add read descriptor

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+Bean

Thanks,
Avri

> -----Original Message-----
> From: linux-scsi-owner@xxxxxxxxxxxxxxx <linux-scsi-owner@xxxxxxxxxxxxxxx>
> On Behalf Of Avri Altman
> Sent: Friday, November 30, 2018 9:32 AM
> To: James E.J. Bottomley <jejb@xxxxxxxxxxxxxxxxxx>; Martin K. Petersen
> <martin.petersen@xxxxxxxxxx>; linux-scsi@xxxxxxxxxxxxxxx
> Cc: Christoph Hellwig <hch@xxxxxx>; Avi Shchislowski
> <Avi.Shchislowski@xxxxxxx>; Alex Lemberg <Alex.Lemberg@xxxxxxx>;
> Bart Van Assche <bvanassche@xxxxxxx>; Evan Green
> <evgreen@xxxxxxxxxxxx>; Doug Anderson <dianders@xxxxxxxxxxxx>;
> Tomas Winkler <tomas.winkler@xxxxxxxxx>; adrian.hunter@xxxxxxxxx;
> Sayali Lokhande <sayalil@xxxxxxxxxxxxxx>
> Subject: RE: [PATCH 0/3] scsi: ufs-bsg: Add read descriptor
> 
> A gentle ping.
> 
> Cheers,
> Avri
> 
> > -----Original Message-----
> > From: linux-scsi-owner@xxxxxxxxxxxxxxx <linux-scsi-
> owner@xxxxxxxxxxxxxxx>
> > On Behalf Of Avri Altman
> > Sent: Monday, November 26, 2018 11:03 AM
> > To: James E.J. Bottomley <jejb@xxxxxxxxxxxxxxxxxx>; Martin K. Petersen
> > <martin.petersen@xxxxxxxxxx>; linux-scsi@xxxxxxxxxxxxxxx
> > Cc: Christoph Hellwig <hch@xxxxxx>; Bart Van Assche
> > <Bart.VanAssche@xxxxxxx>; Avi Shchislowski
> > <Avi.Shchislowski@xxxxxxx>; Alex Lemberg <Alex.Lemberg@xxxxxxx>;
> > Avri Altman <Avri.Altman@xxxxxxx>
> > Subject: [PATCH 0/3] scsi: ufs-bsg: Add read descriptor
> >
> > UFS Protocol Information Units (UPIU) are UFS packets that travel
> > between the host and the device on the UniPro bus. Our previous series
> > added the capability to send UPIUs to the ufs driver. It does not cover
> > all the possible UPIU types - we are mainly focused on device
> management,
> > provisioning, testing and validation, so it covers UPIUs that falls in
> > that box.
> >
> > Our intension is to publish ufs-utils soon - an open source user space
> > utility that relies on that infrastructure to perform those tasks.
> > This short series is adding one last functionality needed by ufs-utils
> > that was somehow left behind - allowing reading descriptors as well.
> >
> > Avri Altman (3):
> >   bsg: Make job reply size different than SCSI_SENSE_BUFFERSIZE
> >   scsi: ufs: Allow reading descriptor via raw upiu
> >   scsi: ufs-bsg: Allow reading descriptors
> >
> >  Documentation/scsi/ufs.txt |  8 ++++++++
> >  block/bsg-lib.c            |  4 ++--
> >  drivers/scsi/ufs/ufs_bsg.c | 25 +++++++++++++++----------
> >  drivers/scsi/ufs/ufshcd.c  | 20 ++++++++++++++------
> >  include/linux/bsg-lib.h    |  2 ++
> >  5 files changed, 41 insertions(+), 18 deletions(-)
> >
> > --
> > 1.9.1





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux