From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Sht->sg_tablesize is set in the driver, and it will be assigned to
shost->sg_tablesize in SCSI mid-layer. So it is not necessary to
assign shost->sg_table one more time in the driver.
In addition to the change, change each scsi_host_template.sg_tablesize
to HISI_SAS_SGE_PAGE_CNT instead of SG_ALL.
Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_main.c | 1 -
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +--
4 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index 95350fd..eed7fc5 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -2410,7 +2410,6 @@ int hisi_sas_probe(struct platform_device *pdev,
shost->max_lun = ~0;
shost->max_channel = 1;
shost->max_cmd_len = 16;
- shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
if (hisi_hba->hw->slot_index_alloc) {
shost->can_queue = hisi_hba->hw->max_command_entries;
shost->cmd_per_lun = hisi_hba->hw->max_command_entries;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index 7186648..107f7c9 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1816,7 +1816,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index 8580c71..8760987 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3578,7 +3578,7 @@ static void wait_cmds_complete_timeout_v2_hw(struct hisi_hba *hisi_hba,
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 59b5f64..44781e3 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2231,7 +2231,7 @@ static ssize_t intr_coal_count_v3_hw_store(struct device *dev,
.change_queue_depth = sas_change_queue_depth,
.bios_param = sas_bios_param,
.this_id = -1,
- .sg_tablesize = SG_ALL,
+ .sg_tablesize = HISI_SAS_SGE_PAGE_CNT,
.max_sectors = SCSI_DEFAULT_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2373,7 +2373,6 @@ static ssize_t intr_coal_count_v3_hw_store(struct device *dev,
shost->max_lun = ~0;
shost->max_channel = 1;
shost->max_cmd_len = 16;
- shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
shost->can_queue = hisi_hba->hw->max_command_entries -
HISI_SAS_RESERVED_IPTT_CNT;
shost->cmd_per_lun = hisi_hba->hw->max_command_entries -
--
1.9.1
