hi, I have two servers with AMI megaraid. They both runnig 2.6.11.* I want to upgrade to 2.6.18. The problem is: the driver does not work anymore. If I try the new driver, the kernel freezes after I see a stack trace dump. It is OK, I read somewhere that I should not use this new one as it does not support my old cards. However the legacy megaraid drivers does not work either. I get unknown-block-device error when the kernel tries to mount sdaX. I do not even see the megaraid driver coming up! no detecting messages like in 2.6.11 This page: http://linux.dell.com/storage.shtml#megaraid lead me to this list. # lspci -v 0000:00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06) Flags: bus master, medium devsel, latency 48 0000:00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06) Flags: bus master, medium devsel, latency 32 0000:00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d) Subsystem: Hewlett-Packard Company NetServer 10/100TX Flags: bus master, medium devsel, latency 64, IRQ 10 Memory at fd020000 (32-bit, non-prefetchable) [size=4K] I/O ports at 1800 [size=64] Memory at fd000000 (32-bit, non-prefetchable) [size=128K] Capabilities: [dc] Power Management version 2 0000:00:04.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) Subsystem: Hewlett-Packard Company NetServer 10/100TX Flags: bus master, medium devsel, latency 64, IRQ 5 Memory at fd021000 (32-bit, non-prefetchable) [size=4K] I/O ports at 1840 [size=64] Memory at fd100000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 2 0000:00:06.0 RAID bus controller: American Megatrends Inc. MegaRAID (rev 20) Subsystem: Hewlett-Packard Company: Unknown device 60e7 Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at fd400000 (32-bit, prefetchable) [size=64K] Capabilities: [80] Power Management version 2 0000:00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA]) Subsystem: Hewlett-Packard Company: Unknown device 10e1 Flags: bus master, stepping, medium devsel, latency 66, IRQ 11 Memory at fc000000 (32-bit, non-prefetchable) [size=16M] I/O ports at 1400 [size=256] Memory at fd022000 (32-bit, non-prefetchable) [size=4K] Capabilities: [5c] Power Management version 2 0000:00:0f.0 Host bridge: ServerWorks CSB5 South Bridge (rev 93) Subsystem: Hewlett-Packard Company: Unknown device 129b Flags: bus master, medium devsel, latency 32 0000:00:0f.1 IDE interface: ServerWorks CSB5 IDE Controller (rev 93) (prog-if 8a [Master SecP PriP]) Subsystem: Hewlett-Packard Company: Unknown device 129b Flags: bus master, medium devsel, latency 32 I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at <ignored> I/O ports at 1880 [size=16] 0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 05) (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company: Unknown device 129b Flags: medium devsel, IRQ 11 Memory at fd023000 (32-bit, non-prefetchable) [size=4K] 0000:00:0f.3 ISA bridge: ServerWorks CSB5 LPC bridge Subsystem: Hewlett-Packard Company: Unknown device 129b Flags: bus master, medium devsel, latency 0 0000:05:04.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 66MHz Ultra3 SCSI Adapter (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 60a0 Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 9 I/O ports at 1c00 [size=256] Memory at fd412000 (64-bit, non-prefetchable) [size=1K] Memory at fd410000 (64-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 0000:05:04.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1010 66MHz Ultra3 SCSI Adapter (rev 01) Subsystem: Hewlett-Packard Company: Unknown device 60a0 Flags: bus master, 66MHz, medium devsel, latency 72, IRQ 11 I/O ports at 2000 [size=256] Memory at fd412400 (64-bit, non-prefetchable) [size=1K] Memory at fd414000 (64-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 I attach my kernel config file too (for 2.6.18). Thanks in advance. Ask for more info if needed. please cc to me. -- CSILLAG Tamas (cstamas) - http://digitus.itk.ppke.hu/~cstamas
Attachment:
config.gz
Description: Binary data
