Driver missed classifying the chip type for G7 when reporting
supported topologies. This resulted in loop being shown as supported
on FC links that are not supported per the standard.
Add the chip classifications to the topology checks in the driver.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_attr.c | 5 +++--
drivers/scsi/lpfc/lpfc_mbox.c | 6 +++---
2 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index feaaa015150e..83924d66fd39 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -3937,8 +3937,9 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr,
val);
return -EINVAL;
}
- if (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
- val == 4) {
+ if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC ||
+ phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) &&
+ val == 4) {
lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
"3114 Loop mode not supported\n");
return -EINVAL;
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index b6aedc55be77..f6a5083a621e 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -513,9 +513,9 @@ lpfc_init_link(struct lpfc_hba * phba,
break;
}
- if (phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC &&
- mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) {
- /* Failover is not tried for Lancer G6 */
+ if ((phba->pcidev->device == PCI_DEVICE_ID_LANCER_G6_FC ||
+ phba->pcidev->device == PCI_DEVICE_ID_LANCER_G7_FC) &&
+ mb->un.varInitLnk.link_flags & FLAGS_TOPOLOGY_MODE_LOOP) {
mb->un.varInitLnk.link_flags = FLAGS_TOPOLOGY_MODE_PT_PT;
phba->cfg_topology = FLAGS_TOPOLOGY_MODE_PT_PT;
}
--
2.13.7
