[PATCH v2 2/3] scsi: hisi_sas: Make sg_tablesize consistent value

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>

Sht->sg_tablesize is set in the driver, and it will be assigned to
shost->sg_tablesize in SCSI mid-layer. So it is not necessary to
assign shost->sg_table one more time in the driver.

In addition to the change, change each scsi_host_template.sg_tablesize
to HISI_SAS_SGE_PAGE_CNT instead of SG_ALL.

Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
 drivers/scsi/hisi_sas/hisi_sas_main.c  | 1 -
 drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 2 +-
 drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 2 +-
 drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 3 +--
 4 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c
index d13a662..cbda48e 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_main.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_main.c
@@ -2410,7 +2410,6 @@ int hisi_sas_probe(struct platform_device *pdev,
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
 	shost->max_cmd_len = 16;
-	shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
 	if (hisi_hba->hw->slot_index_alloc) {
 		shost->can_queue = hisi_hba->hw->max_command_entries;
 		shost->cmd_per_lun = hisi_hba->hw->max_command_entries;
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
index d24342b..2d035cc 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c
@@ -1815,7 +1815,7 @@ static int hisi_sas_v1_init(struct hisi_hba *hisi_hba)
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
index e78a97e..79e58a7 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c
@@ -3570,7 +3570,7 @@ struct device_attribute *host_attrs_v2_hw[] = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 7e2b020..8a08078 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -2224,7 +2224,7 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	.change_queue_depth	= sas_change_queue_depth,
 	.bios_param		= sas_bios_param,
 	.this_id		= -1,
-	.sg_tablesize		= SG_ALL,
+	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
 	.max_sectors		= SCSI_DEFAULT_MAX_SECTORS,
 	.use_clustering		= ENABLE_CLUSTERING,
 	.eh_device_reset_handler = sas_eh_device_reset_handler,
@@ -2366,7 +2366,6 @@ struct device_attribute *host_attrs_v3_hw[] = {
 	shost->max_lun = ~0;
 	shost->max_channel = 1;
 	shost->max_cmd_len = 16;
-	shost->sg_tablesize = min_t(u16, SG_ALL, HISI_SAS_SGE_PAGE_CNT);
 	shost->can_queue = hisi_hba->hw->max_command_entries -
 		HISI_SAS_RESERVED_IPTT_CNT;
 	shost->cmd_per_lun = hisi_hba->hw->max_command_entries -
-- 
1.9.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux