Call sas_remove_host() before removing the target devices in the
driver's .remove() callback function(i.e. during driver unload time).
So that driver can provide a way to allow SYNC CACHE, START STOP unit
commands etc. (which are issued from SML) to the target drives during
driver unload time.
Once sas_remove_host() is called before removing the target drives then
driver can just clean up the resources allocated for target devices and
no need to call sas_port_delete_phy(), sas_port_delete() API's as these
API's internally called from sas_remove_host().
Signed-off-by: Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx>
---
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
drivers/scsi/mpt3sas/mpt3sas_transport.c | 7 +++++--
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 4d73b5e..12f565c 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -9641,6 +9641,7 @@ static void scsih_remove(struct pci_dev *pdev)
/* release all the volumes */
_scsih_ir_shutdown(ioc);
+ sas_remove_host(shost);
list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
list) {
if (raid_device->starget) {
@@ -9682,7 +9683,6 @@ static void scsih_remove(struct pci_dev *pdev)
ioc->sas_hba.num_phys = 0;
}
- sas_remove_host(shost);
mpt3sas_base_detach(ioc);
spin_lock(&gioc_lock);
list_del(&ioc->list);
diff --git a/drivers/scsi/mpt3sas/mpt3sas_transport.c b/drivers/scsi/mpt3sas/mpt3sas_transport.c
index 9685c87..60ae2d0 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_transport.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_transport.c
@@ -806,10 +806,13 @@ mpt3sas_transport_port_remove(struct MPT3SAS_ADAPTER *ioc, u64 sas_address,
mpt3sas_port->remote_identify.sas_address,
mpt3sas_phy->phy_id);
mpt3sas_phy->phy_belongs_to_port = 0;
- sas_port_delete_phy(mpt3sas_port->port, mpt3sas_phy->phy);
+ if (!ioc->remove_host)
+ sas_port_delete_phy(mpt3sas_port->port,
+ mpt3sas_phy->phy);
list_del(&mpt3sas_phy->port_siblings);
}
- sas_port_delete(mpt3sas_port->port);
+ if (!ioc->remove_host)
+ sas_port_delete(mpt3sas_port->port);
kfree(mpt3sas_port);
}
--
1.8.3.1
