Any update on this ? In V6, I have posted has only defect fixes (Other than HBA Hot-Plug Surprise remove support). We are reworking and incorporating the suggestions from Bjorn. And after covering tests, we ll post Hot-Plug Surprise removal patches. Thanks, Suganath Prabu On Tue, Oct 23, 2018 at 3:51 PM Suganath Prabu <suganath-prabu.subramani@xxxxxxxxxxxx> wrote: > > v6 Change set: > Incorporated changes as suggested by Andy. > In Patch 1 converted while loop to do while in > function mpt3sas_wait_for_ioc_to_operational(). > And in patch 3 removed parentheses. > > V5 Change set: > V5 post has only defect fixes. > We are reworking and incorporating the suggestions from Bjorn. > And after covering tests, we ll be post Hot-Plug Surprise > removal patches. > > V4 Change set: > Reframe split strings in print statement, to avoid > > V3 Change Set: > Simplified function "mpt3sas_base_pci_device_is_available" and > made inline > > V2 changes: > Replaced mpt3sas_base_pci_device_is_unplugged with > pci_device_is_present. > > V1 changes: > In Patch 0001 - unlock mutex, if active reset is in progress. > Suganath Prabu (4): > mpt3sas: Separate out mpt3sas_wait_for_ioc_to_operational > mpt3sas: Fix Sync cache command failure during driver unload > mpt3sas:Fix driver modifying persistent data. > mpt3sas: Bump driver version to 27.100.00.00. > > drivers/scsi/mpt3sas/mpt3sas_base.c | 75 ++++++++++++++++++-------------- > drivers/scsi/mpt3sas/mpt3sas_base.h | 8 +++- > drivers/scsi/mpt3sas/mpt3sas_config.c | 28 +++--------- > drivers/scsi/mpt3sas/mpt3sas_ctl.c | 21 ++------- > drivers/scsi/mpt3sas/mpt3sas_scsih.c | 38 +++++++++++++++- > drivers/scsi/mpt3sas/mpt3sas_transport.c | 70 ++++++----------------------- > 6 files changed, 106 insertions(+), 134 deletions(-) > > -- > 1.8.3.1 >
