iIDMA (Intelligent Interleaved Direct Memory Access) allows for
the HBA hardware to send FC frames at the rate at which they can
be received by a target device. By taking advantage of the
higher link rate, the HBA can maximize bandwidth utilization in a
heterogeneous multi-speed SAN.
Within a fabric topology, port speed detection is done via a Name
Server command (GFPN_ID) followed by a Fabric Management command
(GPSC). In an FCAL/N2N topology, port speed is based on the HBA
link-rate.
Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_attr.c | 6 +-
drivers/scsi/qla2xxx/qla_def.h | 39 +++++++-
drivers/scsi/qla2xxx/qla_gbl.h | 8 ++
drivers/scsi/qla2xxx/qla_gs.c | 187 ++++++++++++++++++++++++++++++++++++++-
drivers/scsi/qla2xxx/qla_init.c | 81 +++++++++++++++++
drivers/scsi/qla2xxx/qla_isr.c | 4 +-
drivers/scsi/qla2xxx/qla_mbx.c | 86 ++++++++++++++++++
drivers/scsi/qla2xxx/qla_os.c | 2 +-
8 files changed, 401 insertions(+), 12 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 87f90c4..144b0f8 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -691,13 +691,13 @@ qla2x00_get_host_speed(struct Scsi_Host
uint32_t speed = 0;
switch (ha->link_data_rate) {
- case LDR_1GB:
+ case PORT_SPEED_1GB:
speed = 1;
break;
- case LDR_2GB:
+ case PORT_SPEED_2GB:
speed = 2;
break;
- case LDR_4GB:
+ case PORT_SPEED_4GB:
speed = 4;
break;
}
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 0930260..6d677b0 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -608,6 +608,7 @@ #define MBC_LUN_RESET 0x7E /* Send LUN
*/
#define MBC_SERDES_PARAMS 0x10 /* Serdes Tx Parameters. */
#define MBC_GET_IOCB_STATUS 0x12 /* Get IOCB status command. */
+#define MBC_PORT_PARAMS 0x1A /* Port iDMA Parameters. */
#define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */
#define MBC_TRACE_CONTROL 0x27 /* Trace control command. */
#define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */
@@ -1497,6 +1498,9 @@ typedef struct {
port_id_t d_id;
uint8_t node_name[WWN_SIZE];
uint8_t port_name[WWN_SIZE];
+ uint8_t fabric_port_name[WWN_SIZE];
+ uint16_t fp_speeds;
+ uint16_t fp_speed;
} sw_info_t;
/*
@@ -1524,6 +1528,9 @@ typedef struct fc_port {
uint16_t loop_id;
uint16_t old_loop_id;
+ uint8_t fabric_port_name[WWN_SIZE];
+ uint16_t fp_speed;
+
fc_port_type_t port_type;
atomic_t state;
@@ -1635,6 +1642,15 @@ #define RSNN_NN_CMD 0x239
#define RSNN_NN_REQ_SIZE (16 + 8 + 1 + 255)
#define RSNN_NN_RSP_SIZE 16
+#define GFPN_ID_CMD 0x11C
+#define GFPN_ID_REQ_SIZE (16 + 4)
+#define GFPN_ID_RSP_SIZE (16 + 8)
+
+#define GPSC_CMD 0x127
+#define GPSC_REQ_SIZE (16 + 8)
+#define GPSC_RSP_SIZE (16 + 2 + 2)
+
+
/*
* HBA attribute types.
*/
@@ -1748,7 +1764,7 @@ struct ct_sns_req {
uint8_t reserved[3];
union {
- /* GA_NXT, GPN_ID, GNN_ID, GFT_ID */
+ /* GA_NXT, GPN_ID, GNN_ID, GFT_ID, GFPN_ID */
struct {
uint8_t reserved;
uint8_t port_id[3];
@@ -1823,6 +1839,10 @@ struct ct_sns_req {
struct {
uint8_t port_name[8];
} dpa;
+
+ struct {
+ uint8_t port_name[8];
+ } gpsc;
} req;
};
@@ -1886,6 +1906,15 @@ struct ct_sns_rsp {
uint8_t port_name[8];
struct ct_fdmi_hba_attributes attrs;
} ghat;
+
+ struct {
+ uint8_t port_name[8];
+ } gfpn_id;
+
+ struct {
+ uint16_t speeds;
+ uint16_t speed;
+ } gpsc;
} rsp;
};
@@ -2182,11 +2211,11 @@ #define MIN_IOBASE_LEN 0x100
uint16_t max_public_loop_ids;
uint16_t min_external_loopid; /* First external loop Id */
+#define PORT_SPEED_UNKNOWN 0xFFFF
+#define PORT_SPEED_1GB 0x00
+#define PORT_SPEED_2GB 0x01
+#define PORT_SPEED_4GB 0x03
uint16_t link_data_rate; /* F/W operating speed */
-#define LDR_1GB 0
-#define LDR_2GB 1
-#define LDR_4GB 3
-#define LDR_UNKNOWN 0xFFFF
uint8_t current_topology;
uint8_t prev_topology;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 8311ac2..c48e1d8 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -208,6 +208,12 @@ qla2x00_trace_control(scsi_qla_host_t *,
extern int
qla2x00_read_sfp(scsi_qla_host_t *, dma_addr_t, uint16_t, uint16_t, uint16_t);
+extern int
+qla2x00_get_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t *, uint16_t *);
+
+extern int
+qla2x00_set_idma_speed(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t *);
+
/*
* Global Function Prototypes in qla_isr.c source file.
*/
@@ -279,6 +285,8 @@ extern int qla2x00_rsnn_nn(scsi_qla_host
extern void *qla2x00_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
extern void *qla24xx_prep_ms_fdmi_iocb(scsi_qla_host_t *, uint32_t, uint32_t);
extern int qla2x00_fdmi_register(scsi_qla_host_t *);
+extern int qla2x00_gfpn_id(scsi_qla_host_t *, sw_info_t *);
+extern int qla2x00_gpsc(scsi_qla_host_t *, sw_info_t *);
/*
* Global Function Prototypes in qla_attr.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 2ebf259..029953c 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -687,7 +687,6 @@ qla2x00_rsnn_nn(scsi_qla_host_t *ha)
return (rval);
}
-
/**
* qla2x00_prep_sns_cmd() - Prepare common SNS command request fields for query.
* @ha: HA context
@@ -1647,3 +1646,189 @@ qla2x00_fdmi_register(scsi_qla_host_t *h
return rval;
}
+
+/**
+ * qla2x00_gfpn_id() - SNS Get Fabric Port Name (GFPN_ID) query.
+ * @ha: HA context
+ * @list: switch info entries to populate
+ *
+ * Returns 0 on success.
+ */
+int
+qla2x00_gfpn_id(scsi_qla_host_t *ha, sw_info_t *list)
+{
+ int rval;
+ uint16_t i;
+
+ ms_iocb_entry_t *ms_pkt;
+ struct ct_sns_req *ct_req;
+ struct ct_sns_rsp *ct_rsp;
+
+ if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
+ return QLA_FUNCTION_FAILED;
+
+ for (i = 0; i < MAX_FIBRE_DEVICES; i++) {
+ /* Issue GFPN_ID */
+ memset(list[i].fabric_port_name, 0, WWN_SIZE);
+
+ /* Prepare common MS IOCB */
+ ms_pkt = qla2x00_prep_ms_iocb(ha, GFPN_ID_REQ_SIZE,
+ GFPN_ID_RSP_SIZE);
+
+ /* Prepare CT request */
+ ct_req = qla2x00_prep_ct_req(&ha->ct_sns->p.req, GFPN_ID_CMD,
+ GFPN_ID_RSP_SIZE);
+ ct_rsp = &ha->ct_sns->p.rsp;
+
+ /* Prepare CT arguments -- port_id */
+ ct_req->req.port_id.port_id[0] = list[i].d_id.b.domain;
+ ct_req->req.port_id.port_id[1] = list[i].d_id.b.area;
+ ct_req->req.port_id.port_id[2] = list[i].d_id.b.al_pa;
+
+ /* Execute MS IOCB */
+ rval = qla2x00_issue_iocb(ha, ha->ms_iocb, ha->ms_iocb_dma,
+ sizeof(ms_iocb_entry_t));
+ if (rval != QLA_SUCCESS) {
+ /*EMPTY*/
+ DEBUG2_3(printk("scsi(%ld): GFPN_ID issue IOCB "
+ "failed (%d).\n", ha->host_no, rval));
+ } else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp,
+ "GFPN_ID") != QLA_SUCCESS) {
+ rval = QLA_FUNCTION_FAILED;
+ } else {
+ /* Save fabric portname */
+ memcpy(list[i].fabric_port_name,
+ ct_rsp->rsp.gfpn_id.port_name, WWN_SIZE);
+ }
+
+ /* Last device exit. */
+ if (list[i].d_id.b.rsvd_1 != 0)
+ break;
+ }
+
+ return (rval);
+}
+
+static inline void *
+qla24xx_prep_ms_fm_iocb(scsi_qla_host_t *ha, uint32_t req_size,
+ uint32_t rsp_size)
+{
+ struct ct_entry_24xx *ct_pkt;
+
+ ct_pkt = (struct ct_entry_24xx *)ha->ms_iocb;
+ memset(ct_pkt, 0, sizeof(struct ct_entry_24xx));
+
+ ct_pkt->entry_type = CT_IOCB_TYPE;
+ ct_pkt->entry_count = 1;
+ ct_pkt->nport_handle = cpu_to_le16(ha->mgmt_svr_loop_id);
+ ct_pkt->timeout = __constant_cpu_to_le16(59);
+ ct_pkt->cmd_dsd_count = __constant_cpu_to_le16(1);
+ ct_pkt->rsp_dsd_count = __constant_cpu_to_le16(1);
+ ct_pkt->rsp_byte_count = cpu_to_le32(rsp_size);
+ ct_pkt->cmd_byte_count = cpu_to_le32(req_size);
+
+ ct_pkt->dseg_0_address[0] = cpu_to_le32(LSD(ha->ct_sns_dma));
+ ct_pkt->dseg_0_address[1] = cpu_to_le32(MSD(ha->ct_sns_dma));
+ ct_pkt->dseg_0_len = ct_pkt->cmd_byte_count;
+
+ ct_pkt->dseg_1_address[0] = cpu_to_le32(LSD(ha->ct_sns_dma));
+ ct_pkt->dseg_1_address[1] = cpu_to_le32(MSD(ha->ct_sns_dma));
+ ct_pkt->dseg_1_len = ct_pkt->rsp_byte_count;
+
+ return ct_pkt;
+}
+
+
+static inline struct ct_sns_req *
+qla24xx_prep_ct_fm_req(struct ct_sns_req *ct_req, uint16_t cmd,
+ uint16_t rsp_size)
+{
+ memset(ct_req, 0, sizeof(struct ct_sns_pkt));
+
+ ct_req->header.revision = 0x01;
+ ct_req->header.gs_type = 0xFA;
+ ct_req->header.gs_subtype = 0x01;
+ ct_req->command = cpu_to_be16(cmd);
+ ct_req->max_rsp_size = cpu_to_be16((rsp_size - 16) / 4);
+
+ return ct_req;
+}
+
+/**
+ * qla2x00_gpsc() - FCS Get Port Speed Capabilities (GPSC) query.
+ * @ha: HA context
+ * @list: switch info entries to populate
+ *
+ * Returns 0 on success.
+ */
+int
+qla2x00_gpsc(scsi_qla_host_t *ha, sw_info_t *list)
+{
+ int rval;
+ uint16_t i;
+
+ ms_iocb_entry_t *ms_pkt;
+ struct ct_sns_req *ct_req;
+ struct ct_sns_rsp *ct_rsp;
+
+ if (!IS_QLA24XX(ha) && !IS_QLA54XX(ha))
+ return QLA_FUNCTION_FAILED;
+
+ rval = qla2x00_mgmt_svr_login(ha);
+ if (rval)
+ return rval;
+
+ for (i = 0; i < MAX_FIBRE_DEVICES; i++) {
+ /* Issue GFPN_ID */
+ list[i].fp_speeds = list[i].fp_speed = 0;
+
+ /* Prepare common MS IOCB */
+ ms_pkt = qla24xx_prep_ms_fm_iocb(ha, GPSC_REQ_SIZE,
+ GPSC_RSP_SIZE);
+
+ /* Prepare CT request */
+ ct_req = qla24xx_prep_ct_fm_req(&ha->ct_sns->p.req,
+ GPSC_CMD, GPSC_RSP_SIZE);
+ ct_rsp = &ha->ct_sns->p.rsp;
+
+ /* Prepare CT arguments -- port_name */
+ memcpy(ct_req->req.gpsc.port_name, list[i].fabric_port_name,
+ WWN_SIZE);
+
+ /* Execute MS IOCB */
+ rval = qla2x00_issue_iocb(ha, ha->ms_iocb, ha->ms_iocb_dma,
+ sizeof(ms_iocb_entry_t));
+ if (rval != QLA_SUCCESS) {
+ /*EMPTY*/
+ DEBUG2_3(printk("scsi(%ld): GPSC issue IOCB "
+ "failed (%d).\n", ha->host_no, rval));
+ } else if (qla2x00_chk_ms_status(ha, ms_pkt, ct_rsp,
+ "GPSC") != QLA_SUCCESS) {
+ rval = QLA_FUNCTION_FAILED;
+ } else {
+ /* Save portname */
+ list[i].fp_speeds = ct_rsp->rsp.gpsc.speeds;
+ list[i].fp_speed = ct_rsp->rsp.gpsc.speed;
+
+ DEBUG2_3(printk("scsi(%ld): GPSC ext entry - "
+ "fpn %02x%02x%02x%02x%02x%02x%02x%02x speeds=%04x "
+ "speed=%04x.\n", ha->host_no,
+ list[i].fabric_port_name[0],
+ list[i].fabric_port_name[1],
+ list[i].fabric_port_name[2],
+ list[i].fabric_port_name[3],
+ list[i].fabric_port_name[4],
+ list[i].fabric_port_name[5],
+ list[i].fabric_port_name[6],
+ list[i].fabric_port_name[7],
+ be16_to_cpu(list[i].fp_speeds),
+ be16_to_cpu(list[i].fp_speed)));
+ }
+
+ /* Last device exit. */
+ if (list[i].d_id.b.rsvd_1 != 0)
+ break;
+ }
+
+ return (rval);
+}
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 8596491..2700964 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -2074,6 +2074,19 @@ qla2x00_configure_local_loop(scsi_qla_ho
new_fcport->flags &= ~FCF_FABRIC_DEVICE;
}
+ /* Base iIDMA settings on HBA port speed. */
+ switch (ha->link_data_rate) {
+ case PORT_SPEED_1GB:
+ fcport->fp_speed = cpu_to_be16(BIT_15);
+ break;
+ case PORT_SPEED_2GB:
+ fcport->fp_speed = cpu_to_be16(BIT_14);
+ break;
+ case PORT_SPEED_4GB:
+ fcport->fp_speed = cpu_to_be16(BIT_13);
+ break;
+ }
+
qla2x00_update_fcport(ha, fcport);
found_devs++;
@@ -2109,6 +2122,62 @@ qla2x00_probe_for_all_luns(scsi_qla_host
}
}
+static void
+qla2x00_iidma_fcport(scsi_qla_host_t *ha, fc_port_t *fcport)
+{
+#define LS_UNKNOWN 2
+ static char *link_speeds[5] = { "1", "2", "?", "4" };
+ int rval;
+ uint16_t port_speed, mb[6];
+
+ if (!IS_QLA24XX(ha))
+ return;
+
+ switch (be16_to_cpu(fcport->fp_speed)) {
+ case BIT_15:
+ port_speed = PORT_SPEED_1GB;
+ break;
+ case BIT_14:
+ port_speed = PORT_SPEED_2GB;
+ break;
+ case BIT_13:
+ port_speed = PORT_SPEED_4GB;
+ break;
+ default:
+ DEBUG2(printk("scsi(%ld): %02x%02x%02x%02x%02x%02x%02x%02x -- "
+ "unsupported FM port operating speed (%04x).\n",
+ ha->host_no, fcport->port_name[0], fcport->port_name[1],
+ fcport->port_name[2], fcport->port_name[3],
+ fcport->port_name[4], fcport->port_name[5],
+ fcport->port_name[6], fcport->port_name[7],
+ be16_to_cpu(fcport->fp_speed)));
+ port_speed = PORT_SPEED_UNKNOWN;
+ break;
+ }
+ if (port_speed == PORT_SPEED_UNKNOWN)
+ return;
+
+ rval = qla2x00_set_idma_speed(ha, fcport->loop_id, port_speed, mb);
+ if (rval != QLA_SUCCESS) {
+ DEBUG2(printk("scsi(%ld): Unable to adjust iIDMA "
+ "%02x%02x%02x%02x%02x%02x%02x%02x -- %04x %x %04x %04x.\n",
+ ha->host_no, fcport->port_name[0], fcport->port_name[1],
+ fcport->port_name[2], fcport->port_name[3],
+ fcport->port_name[4], fcport->port_name[5],
+ fcport->port_name[6], fcport->port_name[7], rval,
+ port_speed, mb[0], mb[1]));
+ } else {
+ DEBUG2(qla_printk(KERN_INFO, ha,
+ "iIDMA adjusted to %s GB/s on "
+ "%02x%02x%02x%02x%02x%02x%02x%02x.\n",
+ link_speeds[port_speed], fcport->port_name[0],
+ fcport->port_name[1], fcport->port_name[2],
+ fcport->port_name[3], fcport->port_name[4],
+ fcport->port_name[5], fcport->port_name[6],
+ fcport->port_name[7]));
+ }
+}
+
/*
* qla2x00_update_fcport
* Updates device on list.
@@ -2135,6 +2204,8 @@ qla2x00_update_fcport(scsi_qla_host_t *h
PORT_RETRY_TIME);
fcport->flags &= ~FCF_LOGIN_NEEDED;
+ qla2x00_iidma_fcport(ha, fcport);
+
atomic_set(&fcport->state, FCS_ONLINE);
if (ha->flags.init_done)
@@ -2416,6 +2487,8 @@ qla2x00_find_all_fabric_devs(scsi_qla_ho
} else if (qla2x00_gnn_id(ha, swl) != QLA_SUCCESS) {
kfree(swl);
swl = NULL;
+ } else if (qla2x00_gfpn_id(ha, swl) == QLA_SUCCESS) {
+ qla2x00_gpsc(ha, swl);
}
}
swl_idx = 0;
@@ -2450,6 +2523,9 @@ qla2x00_find_all_fabric_devs(scsi_qla_ho
swl[swl_idx].node_name, WWN_SIZE);
memcpy(new_fcport->port_name,
swl[swl_idx].port_name, WWN_SIZE);
+ memcpy(new_fcport->fabric_port_name,
+ swl[swl_idx].fabric_port_name, WWN_SIZE);
+ new_fcport->fp_speed = swl[swl_idx].fp_speed;
if (swl[swl_idx].d_id.b.rsvd_1 != 0) {
last_dev = 1;
@@ -2507,6 +2583,11 @@ qla2x00_find_all_fabric_devs(scsi_qla_ho
found++;
+ /* Update port state. */
+ memcpy(fcport->fabric_port_name,
+ new_fcport->fabric_port_name, WWN_SIZE);
+ fcport->fp_speed = new_fcport->fp_speed;
+
/*
* If address the same and state FCS_ONLINE, nothing
* changed.
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index de06131..5fa933c 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -400,7 +400,7 @@ #define LS_UNKNOWN 2
case MBA_LOOP_UP: /* Loop Up Event */
if (IS_QLA2100(ha) || IS_QLA2200(ha)) {
link_speed = link_speeds[0];
- ha->link_data_rate = LDR_1GB;
+ ha->link_data_rate = PORT_SPEED_1GB;
} else {
link_speed = link_speeds[LS_UNKNOWN];
if (mb[1] < 5)
@@ -429,7 +429,7 @@ #define LS_UNKNOWN 2
}
ha->flags.management_server_logged_in = 0;
- ha->link_data_rate = LDR_UNKNOWN;
+ ha->link_data_rate = PORT_SPEED_UNKNOWN;
if (ql2xfdmienable)
set_bit(REGISTER_FDMI_NEEDED, &ha->dpc_flags);
break;
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 879f281..4cde76c 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -2540,3 +2540,89 @@ qla2x00_read_sfp(scsi_qla_host_t *ha, dm
return rval;
}
+
+int
+qla2x00_get_idma_speed(scsi_qla_host_t *ha, uint16_t loop_id,
+ uint16_t *port_speed, uint16_t *mb)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_QLA24XX(ha))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+ mcp->mb[0] = MBC_PORT_PARAMS;
+ mcp->mb[1] = loop_id;
+ mcp->mb[2] = mcp->mb[3] = mcp->mb[4] = mcp->mb[5] = 0;
+ mcp->out_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_1|MBX_0;
+ mcp->tov = 30;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(ha, mcp);
+
+ /* Return mailbox statuses. */
+ if (mb != NULL) {
+ mb[0] = mcp->mb[0];
+ mb[1] = mcp->mb[1];
+ mb[3] = mcp->mb[3];
+ mb[4] = mcp->mb[4];
+ mb[5] = mcp->mb[5];
+ }
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
+ ha->host_no, rval));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+ if (port_speed)
+ *port_speed = mcp->mb[3];
+ }
+
+ return rval;
+}
+
+int
+qla2x00_set_idma_speed(scsi_qla_host_t *ha, uint16_t loop_id,
+ uint16_t port_speed, uint16_t *mb)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ if (!IS_QLA24XX(ha))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no));
+
+ mcp->mb[0] = MBC_PORT_PARAMS;
+ mcp->mb[1] = loop_id;
+ mcp->mb[2] = BIT_0;
+ mcp->mb[3] = port_speed & (BIT_2|BIT_1|BIT_0);
+ mcp->mb[4] = mcp->mb[5] = 0;
+ mcp->out_mb = MBX_5|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_5|MBX_4|MBX_3|MBX_1|MBX_0;
+ mcp->tov = 30;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(ha, mcp);
+
+ /* Return mailbox statuses. */
+ if (mb != NULL) {
+ mb[0] = mcp->mb[0];
+ mb[1] = mcp->mb[1];
+ mb[3] = mcp->mb[3];
+ mb[4] = mcp->mb[4];
+ mb[5] = mcp->mb[5];
+ }
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk("%s(%ld): failed=%x.\n", __func__,
+ ha->host_no, rval));
+ } else {
+ DEBUG11(printk("%s(%ld): done.\n", __func__, ha->host_no));
+ }
+
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 65cbe2f..9e665e1 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -1385,7 +1385,7 @@ qla2x00_probe_one(struct pci_dev *pdev,
ha->prev_topology = 0;
ha->init_cb_size = sizeof(init_cb_t);
ha->mgmt_svr_loop_id = MANAGEMENT_SERVER;
- ha->link_data_rate = LDR_UNKNOWN;
+ ha->link_data_rate = PORT_SPEED_UNKNOWN;
ha->optrom_size = OPTROM_SIZE_2300;
/* Assign ISP specific operations. */
--
1.4.2.3.gf59615
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
