There is no good reason to duplicate the PCI menu in every architecture. Instead provide a selectable HAS_PCI symbol that indicates availability of PCI support and the handle the rest in drivers/pci. Note that for powerpc we now select HAVE_PCI globally instead of the convoluted mess of conditional or or non-conditional support per board, similar to what we do e.g. on x86. For alpha PCI is selected for the non-jensen configs as it was the default before, and a lot of code does not compile without PCI enabled. On other architectures with limited PCI support that wasn't as complicated I've left the selection as-is. Signed-off-by: Christoph Hellwig <hch@xxxxxx> Acked-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx> Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx> --- arch/alpha/Kconfig | 15 ++------- arch/arc/Kconfig | 20 ------------ arch/arc/plat-axs10x/Kconfig | 2 +- arch/arc/plat-hsdk/Kconfig | 2 +- arch/arm/Kconfig | 19 ++---------- arch/arm/mach-ks8695/Kconfig | 10 +++--- arch/arm/mach-pxa/Kconfig | 2 +- arch/arm64/Kconfig | 10 +----- arch/hexagon/Kconfig | 3 -- arch/ia64/Kconfig | 9 +----- arch/m68k/Kconfig.bus | 11 ------- arch/m68k/Kconfig.cpu | 1 + arch/microblaze/Kconfig | 6 +--- arch/mips/Kconfig | 43 +++++++++----------------- arch/mips/alchemy/Kconfig | 6 ++-- arch/mips/ath25/Kconfig | 2 +- arch/mips/ath79/Kconfig | 8 ++--- arch/mips/bcm63xx/Kconfig | 14 ++++----- arch/mips/lantiq/Kconfig | 2 +- arch/mips/loongson64/Kconfig | 6 ++-- arch/mips/pmcs-msp71xx/Kconfig | 10 +++--- arch/mips/ralink/Kconfig | 8 ++--- arch/mips/sibyte/Kconfig | 10 +++--- arch/mips/txx9/Kconfig | 8 ++--- arch/mips/vr41xx/Kconfig | 8 ++--- arch/parisc/Kconfig | 1 + arch/powerpc/Kconfig | 25 ++++----------- arch/powerpc/platforms/44x/Kconfig | 1 - arch/powerpc/platforms/512x/Kconfig | 1 - arch/powerpc/platforms/52xx/Kconfig | 1 - arch/powerpc/platforms/83xx/Kconfig | 1 - arch/powerpc/platforms/85xx/Kconfig | 1 - arch/powerpc/platforms/86xx/Kconfig | 2 -- arch/powerpc/platforms/Kconfig | 1 - arch/powerpc/platforms/Kconfig.cputype | 2 -- arch/powerpc/platforms/ps3/Kconfig | 1 - arch/riscv/Kconfig | 18 ++--------- arch/s390/Kconfig | 23 +++++--------- arch/sh/Kconfig | 19 ++---------- arch/sh/boards/Kconfig | 30 +++++++++--------- arch/sparc/Kconfig | 15 +-------- arch/um/Kconfig | 3 -- arch/unicore32/Kconfig | 11 +------ arch/x86/Kconfig | 12 +------ arch/x86/configs/i386_defconfig | 1 + arch/x86/configs/x86_64_defconfig | 1 + arch/xtensa/Kconfig | 16 +--------- arch/xtensa/configs/common_defconfig | 1 + arch/xtensa/configs/iss_defconfig | 2 +- drivers/Kconfig | 4 +++ drivers/parisc/Kconfig | 11 ------- drivers/pci/Kconfig | 12 +++++++ 52 files changed, 133 insertions(+), 318 deletions(-) diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 5b4f88363453..bb89924c0361 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -6,6 +6,8 @@ config ALPHA select ARCH_MIGHT_HAVE_PC_SERIO select ARCH_NO_PREEMPT select ARCH_USE_CMPXCHG_LOCKREF + select HAVE_PCI if !ALPHA_JENSEN + select PCI if !ALPHA_JENSEN select HAVE_AOUT select HAVE_IDE select HAVE_OPROFILE @@ -15,6 +17,7 @@ config ALPHA select NEED_SG_DMA_LENGTH select VIRT_TO_BUS select GENERIC_IRQ_PROBE + select GENERIC_PCI_IOMAP if PCI select AUTO_IRQ_AFFINITY if SMP select GENERIC_IRQ_SHOW select ARCH_WANT_IPC_PARSE_VERSION @@ -319,17 +322,6 @@ config ISA_DMA_API bool default y -config PCI - bool - depends on !ALPHA_JENSEN - select GENERIC_PCI_IOMAP - default y - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - config PCI_DOMAINS bool default y @@ -681,7 +673,6 @@ config HZ default 1200 if HZ_1200 default 1024 -source "drivers/pci/Kconfig" source "drivers/eisa/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index a045f3086047..55a6953e9239 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -53,9 +53,6 @@ config ARC config ARCH_HAS_CACHE_LINE_SIZE def_bool y -config MIGHT_HAVE_PCI - bool - config TRACE_IRQFLAGS_SUPPORT def_bool y @@ -555,24 +552,7 @@ config FORCE_MAX_ZONEORDER default "12" if ARC_HUGEPAGE_16M default "11" -menu "Bus Support" - -config PCI - bool "PCI support" if MIGHT_HAVE_PCI - help - PCI is the name of a bus system, i.e., the way the CPU talks to - the other stuff inside your box. Find out if your board/platform - has PCI. - - Note: PCIe support for Synopsys Device will be available only - when HAPS DX is configured with PCIe RC bitmap. If you have PCI, - say Y, otherwise N. - config PCI_SYSCALL def_bool PCI -source "drivers/pci/Kconfig" - -endmenu - source "kernel/power/Kconfig" diff --git a/arch/arc/plat-axs10x/Kconfig b/arch/arc/plat-axs10x/Kconfig index 4e0df7b7a248..27b9eb97a6bf 100644 --- a/arch/arc/plat-axs10x/Kconfig +++ b/arch/arc/plat-axs10x/Kconfig @@ -11,7 +11,7 @@ menuconfig ARC_PLAT_AXS10X select DW_APB_ICTL select GPIO_DWAPB select OF_GPIO - select MIGHT_HAVE_PCI + select HAVE_PCI select GENERIC_IRQ_CHIP select GPIOLIB select AXS101 if ISA_ARCOMPACT diff --git a/arch/arc/plat-hsdk/Kconfig b/arch/arc/plat-hsdk/Kconfig index 9356753c2ed8..f25c085b9874 100644 --- a/arch/arc/plat-hsdk/Kconfig +++ b/arch/arc/plat-hsdk/Kconfig @@ -11,4 +11,4 @@ menuconfig ARC_SOC_HSDK select ARC_HAS_ACCL_REGS select CLK_HSDK select RESET_HSDK - select MIGHT_HAVE_PCI + select HAVE_PCI diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e8cd55a5b04c..516105df6c71 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -149,9 +149,6 @@ config ARM_DMA_IOMMU_ALIGNMENT endif -config MIGHT_HAVE_PCI - bool - config SYS_SUPPORTS_APM_EMULATION bool @@ -335,7 +332,7 @@ config ARCH_MULTIPLATFORM select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER - select MIGHT_HAVE_PCI + select HAVE_PCI select PCI_DOMAINS if PCI select SPARSE_IRQ select USE_OF @@ -451,7 +448,7 @@ config ARCH_IXP4XX select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS select GPIOLIB - select MIGHT_HAVE_PCI + select HAVE_PCI select NEED_MACH_IO_H select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO @@ -464,7 +461,7 @@ config ARCH_DOVE select GENERIC_CLOCKEVENTS select GENERIC_IRQ_MULTI_HANDLER select GPIOLIB - select MIGHT_HAVE_PCI + select HAVE_PCI select MVEBU_MBUS select PINCTRL select PINCTRL_DOVE @@ -1231,14 +1228,6 @@ config ISA_DMA config ISA_DMA_API bool -config PCI - bool "PCI support" if MIGHT_HAVE_PCI - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - config PCI_DOMAINS bool "Support for multiple PCI domains" depends on PCI @@ -1267,8 +1256,6 @@ config PCI_HOST_ITE8152 default y select DMABOUNCE -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" endmenu diff --git a/arch/arm/mach-ks8695/Kconfig b/arch/arm/mach-ks8695/Kconfig index a545976bdbd6..b3185c05fffa 100644 --- a/arch/arm/mach-ks8695/Kconfig +++ b/arch/arm/mach-ks8695/Kconfig @@ -4,7 +4,7 @@ menu "Kendin/Micrel KS8695 Implementations" config MACH_KS8695 bool "KS8695 development board" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to run on the original Kendin-Micrel KS8695 development board. @@ -52,7 +52,7 @@ config MACH_CM4002 config MACH_CM4008 bool "OpenGear CM4008" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear CM4008 Console Server. See http://www.opengear.com for more @@ -60,7 +60,7 @@ config MACH_CM4008 config MACH_CM41xx bool "OpenGear CM41xx" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear CM4016 or CM4048 Console Servers. See http://www.opengear.com for @@ -68,7 +68,7 @@ config MACH_CM41xx config MACH_IM4004 bool "OpenGear IM4004" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear IM4004 Secure Access Server. See http://www.opengear.com for @@ -76,7 +76,7 @@ config MACH_IM4004 config MACH_IM42xx bool "OpenGear IM42xx" - select MIGHT_HAVE_PCI + select HAVE_PCI help Say 'Y' here if you want your kernel to support the OpenGear IM4216 or IM4248 Console Servers. See http://www.opengear.com for diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index a68b34183107..b185794549be 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -125,7 +125,7 @@ config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select ARCH_HAS_DMA_SET_COHERENT_MASK if PCI select IWMMXT - select MIGHT_HAVE_PCI + select HAVE_PCI select NEED_MACH_IO_H if PCI select PXA25x select PXA27x diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index 1b1a0e95c751..ae0f1ef0a748 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -98,6 +98,7 @@ config ARM64 select GENERIC_TIME_VSYSCALL select HANDLE_DOMAIN_IRQ select HARDIRQS_SW_RESEND + select HAVE_PCI select HAVE_ACPI_APEI if (ACPI && EFI) select HAVE_ALIGNED_STRUCT_PAGE if SLUB select HAVE_ARCH_AUDITSYSCALL @@ -284,13 +285,6 @@ source "arch/arm64/Kconfig.platforms" menu "Bus support" -config PCI - bool "PCI support" - help - This feature enables support for PCI bus system. If you say Y - here, the kernel will include drivers and infrastructure code - to support PCI bus devices. - config PCI_DOMAINS def_bool PCI @@ -300,8 +294,6 @@ config PCI_DOMAINS_GENERIC config PCI_SYSCALL def_bool PCI -source "drivers/pci/Kconfig" - endmenu menu "Kernel Features" diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig index 89a4b22f34d9..1bc856c61ed8 100644 --- a/arch/hexagon/Kconfig +++ b/arch/hexagon/Kconfig @@ -44,9 +44,6 @@ config FRAME_POINTER config LOCKDEP_SUPPORT def_bool y -config PCI - def_bool n - config EARLY_PRINTK def_bool y diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 8b4a0c1748c0..89da763d7c17 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -51,6 +51,7 @@ config IA64 select MODULES_USE_ELF_RELA select ARCH_USE_CMPXCHG_LOCKREF select HAVE_ARCH_AUDITSYSCALL + select HAVE_PCI if !IA64_HP_SIM select NEED_DMA_MAP_STATE select NEED_SG_DMA_LENGTH default y @@ -546,20 +547,12 @@ if !IA64_HP_SIM menu "Bus options (PCI, PCMCIA)" -config PCI - bool "PCI support" - help - Real IA-64 machines all have PCI/PCI-X/PCI Express busses. Say Y - here unless you are using a simulator without PCI support. - config PCI_DOMAINS def_bool PCI config PCI_SYSCALL def_bool PCI -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" endmenu diff --git a/arch/m68k/Kconfig.bus b/arch/m68k/Kconfig.bus index aef698fa50e5..8cb0604b195b 100644 --- a/arch/m68k/Kconfig.bus +++ b/arch/m68k/Kconfig.bus @@ -63,17 +63,6 @@ source "drivers/zorro/Kconfig" endif -config PCI - bool "PCI support" - depends on M54xx - help - Enable the PCI bus. Support for the PCI bus hardware built into the - ColdFire 547x and 548x processors. - -if PCI -source "drivers/pci/Kconfig" -endif - if !MMU config ISA_DMA_API diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index 21f00349af52..60ac1cd8b96f 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -299,6 +299,7 @@ config M53xx bool config M54xx + select HAVE_PCI bool endif # COLDFIRE diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index ace5c5bf1836..3d352862db30 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -32,6 +32,7 @@ config MICROBLAZE select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP select HAVE_OPROFILE + select HAVE_PCI select IRQ_DOMAIN select XILINX_INTC select MODULES_USE_ELF_RELA @@ -268,9 +269,6 @@ endmenu menu "Bus Options" -config PCI - bool "PCI support" - config PCI_DOMAINS def_bool PCI @@ -284,6 +282,4 @@ config PCI_XILINX bool "Xilinx PCI host bridge support" depends on PCI -source "drivers/pci/Kconfig" - endmenu diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 35511999156a..09b93d5a55cb 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -74,6 +74,7 @@ config MIPS select IRQ_FORCED_THREADING select MODULES_USE_ELF_RELA if MODULES && 64BIT select MODULES_USE_ELF_REL if MODULES + select PCI_DOMAINS if PCI select PERF_USE_VMALLOC select RTC_LIB if !MACH_LOONGSON64 select SYSCTL_EXCEPTION_TRACE @@ -96,7 +97,7 @@ config MIPS_GENERIC select CPU_MIPSR2_IRQ_EI select CSRC_R4K select DMA_PERDEV_COHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select LIBFDT select MIPS_AUTO_PFN_OFFSET @@ -256,7 +257,7 @@ config BCM47XX select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SYS_HAS_CPU_MIPS32_R1 select NO_EXCEPT_FILL @@ -299,7 +300,7 @@ config MIPS_COBALT select CSRC_R4K select CEVT_GT641XX select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select I8253 select I8259 select IRQ_MIPS_CPU @@ -422,7 +423,7 @@ config LASAT select CSRC_R4K select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select PCI_GT64XXX_PCI0 select MIPS_NILE4 @@ -502,7 +503,7 @@ config MIPS_MALTA select HAVE_PCSPKR_PLATFORM select IRQ_MIPS_CPU select MIPS_GIC - select HW_HAS_PCI + select HAVE_PCI select I8253 select I8259 select MIPS_BONITO64 @@ -556,7 +557,7 @@ config MACH_PIC32 config NEC_MARKEINS bool "NEC EMMA2RH Mark-eins board" select SOC_EMMA2RH - select HW_HAS_PCI + select HAVE_PCI help This enables support for the NEC Electronics Mark-eins boards. @@ -673,7 +674,7 @@ config SGI_IP27 select BOOT_ELF64 select DEFAULT_SGI_PARTITION select SYS_HAS_EARLY_PRINTK - select HW_HAS_PCI + select HAVE_PCI select NR_CPUS_DEFAULT_64 select SYS_HAS_CPU_R10000 select SYS_SUPPORTS_64BIT_KERNEL @@ -733,7 +734,7 @@ config SGI_IP32 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select R5000_CPU_SCACHE select RM7000_CPU_SCACHE @@ -843,7 +844,7 @@ config SNI_RM select GENERIC_ISA_DMA select HAVE_PCSPKR_PLATFORM select HW_HAS_EISA - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select I8253 select I8259 @@ -876,7 +877,7 @@ config MIKROTIK_RB532 select CEVT_R4K select CSRC_R4K select DMA_NONCOHERENT - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SYS_HAS_CPU_MIPS32_R1 select SYS_SUPPORTS_32BIT_KERNEL @@ -903,7 +904,7 @@ config CAVIUM_OCTEON_SOC select SYS_SUPPORTS_HOTPLUG_CPU if CPU_BIG_ENDIAN select SYS_HAS_EARLY_PRINTK select SYS_HAS_CPU_CAVIUM_OCTEON - select HW_HAS_PCI + select HAVE_PCI select ZONE_DMA32 select HOLES_IN_ZONE select GPIOLIB @@ -936,7 +937,7 @@ config NLM_XLR_BOARD select NLM_COMMON select SYS_HAS_CPU_XLR select SYS_SUPPORTS_SMP - select HW_HAS_PCI + select HAVE_PCI select SWAP_IO_SPACE select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -962,7 +963,7 @@ config NLM_XLP_BOARD select NLM_COMMON select SYS_HAS_CPU_XLP select SYS_SUPPORTS_SMP - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL select PHYS_ADDR_T_64BIT @@ -997,7 +998,7 @@ config MIPS_PARAVIRT select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_CPU_MIPS64_R2 select SYS_HAS_CPU_CAVIUM_OCTEON - select HW_HAS_PCI + select HAVE_PCI select SWAP_IO_SPACE help This option supports guest running under ???? @@ -2992,18 +2993,6 @@ menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)" config HW_HAS_EISA bool -config HW_HAS_PCI - bool - -config PCI - bool "Support for PCI controller" - depends on HW_HAS_PCI - select PCI_DOMAINS - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, or VESA. If you have PCI, - say Y, otherwise N. config HT_PCI bool "Support for HT-linked PCI" @@ -3030,8 +3019,6 @@ config PCI_DRIVERS_LEGACY def_bool !PCI_DRIVERS_GENERIC select NO_GENERIC_PCI_IOPORT_MAP -source "drivers/pci/Kconfig" - # # ISA support is now enabled via select. Too many systems still have the one # or other ISA chip on the board that users don't know about so don't expect diff --git a/arch/mips/alchemy/Kconfig b/arch/mips/alchemy/Kconfig index 7d73f7f4202b..83b288b95b16 100644 --- a/arch/mips/alchemy/Kconfig +++ b/arch/mips/alchemy/Kconfig @@ -14,7 +14,7 @@ choice config MIPS_MTX1 bool "4G Systems MTX-1 board" - select HW_HAS_PCI + select HAVE_PCI select ALCHEMY_GPIOINT_AU1000 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK @@ -22,7 +22,7 @@ config MIPS_MTX1 config MIPS_DB1XXX bool "Alchemy DB1XXX / PB1XXX boards" select GPIOLIB - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK help @@ -40,7 +40,7 @@ config MIPS_XXS1500 config MIPS_GPR bool "Trapeze ITS GPR board" select ALCHEMY_GPIOINT_AU1000 - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_HAS_EARLY_PRINTK diff --git a/arch/mips/ath25/Kconfig b/arch/mips/ath25/Kconfig index 2c1dfd06c366..4c1b4579c814 100644 --- a/arch/mips/ath25/Kconfig +++ b/arch/mips/ath25/Kconfig @@ -13,6 +13,6 @@ config PCI_AR2315 bool "Atheros AR2315 PCI controller support" depends on SOC_AR2315 select ARCH_HAS_PHYS_TO_DMA - select HW_HAS_PCI + select HAVE_PCI select PCI default y diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig index 9547cf1ea38d..191c3910eac5 100644 --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -75,11 +75,11 @@ config ATH79_MACH_UBNT_XM endmenu config SOC_AR71XX - select HW_HAS_PCI + select HAVE_PCI def_bool n config SOC_AR724X - select HW_HAS_PCI + select HAVE_PCI select PCI_AR724X if PCI def_bool n @@ -90,12 +90,12 @@ config SOC_AR933X def_bool n config SOC_AR934X - select HW_HAS_PCI + select HAVE_PCI select PCI_AR724X if PCI def_bool n config SOC_QCA955X - select HW_HAS_PCI + select HAVE_PCI select PCI_AR724X if PCI def_bool n diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig index 96ed735a4f4a..837f6e5a2f37 100644 --- a/arch/mips/bcm63xx/Kconfig +++ b/arch/mips/bcm63xx/Kconfig @@ -5,17 +5,17 @@ menu "CPU support" config BCM63XX_CPU_3368 bool "support 3368 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6328 bool "support 6328 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6338 bool "support 6338 CPU" select SYS_HAS_CPU_BMIPS32_3300 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6345 bool "support 6345 CPU" @@ -24,22 +24,22 @@ config BCM63XX_CPU_6345 config BCM63XX_CPU_6348 bool "support 6348 CPU" select SYS_HAS_CPU_BMIPS32_3300 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6358 bool "support 6358 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6362 bool "support 6362 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI config BCM63XX_CPU_6368 bool "support 6368 CPU" select SYS_HAS_CPU_BMIPS4350 - select HW_HAS_PCI + select HAVE_PCI endmenu source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/arch/mips/lantiq/Kconfig b/arch/mips/lantiq/Kconfig index 8e3a1fc2bc39..188de95d6dbd 100644 --- a/arch/mips/lantiq/Kconfig +++ b/arch/mips/lantiq/Kconfig @@ -19,7 +19,7 @@ config SOC_AMAZON_SE config SOC_XWAY bool "XWAY" select SOC_TYPE_XWAY - select HW_HAS_PCI + select HAVE_PCI select MFD_SYSCON select MFD_CORE diff --git a/arch/mips/loongson64/Kconfig b/arch/mips/loongson64/Kconfig index c865b4b9b775..edd23dc4589d 100644 --- a/arch/mips/loongson64/Kconfig +++ b/arch/mips/loongson64/Kconfig @@ -15,7 +15,7 @@ config LEMOTE_FULOONG2E select DMA_NONCOHERENT select BOOT_ELF32 select BOARD_SCACHE - select HW_HAS_PCI + select HAVE_PCI select I8259 select ISA select IRQ_MIPS_CPU @@ -46,7 +46,7 @@ config LEMOTE_MACH2F select DMA_NONCOHERENT select GENERIC_ISA_DMA_SUPPORT_BROKEN select HAVE_CLK - select HW_HAS_PCI + select HAVE_PCI select I8259 select IRQ_MIPS_CPU select ISA @@ -74,7 +74,7 @@ config LOONGSON_MACH3X select CSRC_R4K select CEVT_R4K select CPU_HAS_WB - select HW_HAS_PCI + select HAVE_PCI select ISA select HT_PCI select I8259 diff --git a/arch/mips/pmcs-msp71xx/Kconfig b/arch/mips/pmcs-msp71xx/Kconfig index d319bc0c3df6..b185b7620c97 100644 --- a/arch/mips/pmcs-msp71xx/Kconfig +++ b/arch/mips/pmcs-msp71xx/Kconfig @@ -6,25 +6,25 @@ choice config PMC_MSP4200_EVAL bool "PMC-Sierra MSP4200 Eval Board" select IRQ_MSP_SLP - select HW_HAS_PCI + select HAVE_PCI select MIPS_L1_CACHE_SHIFT_4 config PMC_MSP4200_GW bool "PMC-Sierra MSP4200 VoIP Gateway" select IRQ_MSP_SLP - select HW_HAS_PCI + select HAVE_PCI config PMC_MSP7120_EVAL bool "PMC-Sierra MSP7120 Eval Board" select SYS_SUPPORTS_MULTITHREADING select IRQ_MSP_CIC - select HW_HAS_PCI + select HAVE_PCI config PMC_MSP7120_GW bool "PMC-Sierra MSP7120 Residential Gateway" select SYS_SUPPORTS_MULTITHREADING select IRQ_MSP_CIC - select HW_HAS_PCI + select HAVE_PCI select MSP_HAS_USB select MSP_ETH @@ -32,7 +32,7 @@ config PMC_MSP7120_FPGA bool "PMC-Sierra MSP7120 FPGA" select SYS_SUPPORTS_MULTITHREADING select IRQ_MSP_CIC - select HW_HAS_PCI + select HAVE_PCI endchoice diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig index 1f9cb0e3c79a..4c8006b4a5f7 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -27,18 +27,18 @@ choice config SOC_RT288X bool "RT288x" select MIPS_L1_CACHE_SHIFT_4 - select HW_HAS_PCI + select HAVE_PCI config SOC_RT305X bool "RT305x" config SOC_RT3883 bool "RT3883" - select HW_HAS_PCI + select HAVE_PCI config SOC_MT7620 bool "MT7620/8" - select HW_HAS_PCI + select HAVE_PCI config SOC_MT7621 bool "MT7621" @@ -50,7 +50,7 @@ choice select MIPS_GIC select COMMON_CLK select CLKSRC_MIPS_GIC - select HW_HAS_PCI + select HAVE_PCI endchoice choice diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index 7ec278d72096..470d46183677 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -3,7 +3,7 @@ config SIBYTE_SB1250 bool select CEVT_SB1250 select CSRC_SB1250 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_ENABLE_LDT_IF_PCI select SIBYTE_HAS_ZBUS_PROFILING @@ -23,7 +23,7 @@ config SIBYTE_BCM1125 bool select CEVT_SB1250 select CSRC_SB1250 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_BCM112X select SIBYTE_HAS_ZBUS_PROFILING @@ -33,7 +33,7 @@ config SIBYTE_BCM1125H bool select CEVT_SB1250 select CSRC_SB1250 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_BCM112X select SIBYTE_ENABLE_LDT_IF_PCI @@ -52,7 +52,7 @@ config SIBYTE_BCM1x80 bool select CEVT_BCM1480 select CSRC_BCM1480 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_HAS_ZBUS_PROFILING select SIBYTE_SB1xxx_SOC @@ -62,7 +62,7 @@ config SIBYTE_BCM1x55 bool select CEVT_BCM1480 select CSRC_BCM1480 - select HW_HAS_PCI + select HAVE_PCI select IRQ_MIPS_CPU select SIBYTE_SB1xxx_SOC select SIBYTE_HAS_ZBUS_PROFILING diff --git a/arch/mips/txx9/Kconfig b/arch/mips/txx9/Kconfig index d2509c93f0ee..9a22a182b7a4 100644 --- a/arch/mips/txx9/Kconfig +++ b/arch/mips/txx9/Kconfig @@ -59,7 +59,7 @@ config SOC_TX3927 bool select CEVT_TXX9 select HAS_TXX9_SERIAL - select HW_HAS_PCI + select HAVE_PCI select IRQ_TXX9 select GPIO_TXX9 @@ -67,7 +67,7 @@ config SOC_TX4927 bool select CEVT_TXX9 select HAS_TXX9_SERIAL - select HW_HAS_PCI + select HAVE_PCI select IRQ_TXX9 select PCI_TX4927 select GPIO_TXX9 @@ -77,7 +77,7 @@ config SOC_TX4938 bool select CEVT_TXX9 select HAS_TXX9_SERIAL - select HW_HAS_PCI + select HAVE_PCI select IRQ_TXX9 select PCI_TX4927 select GPIO_TXX9 @@ -87,7 +87,7 @@ config SOC_TX4939 bool select CEVT_TXX9 select HAS_TXX9_SERIAL - select HW_HAS_PCI + select HAVE_PCI select PCI_TX4927 select HAS_TXX9_ACLC diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index 992c988b83b0..e0b651db371d 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -30,7 +30,7 @@ config TANBAC_TB022X select CSRC_R4K select DMA_NONCOHERENT select IRQ_MIPS_CPU - select HW_HAS_PCI + select HAVE_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN help @@ -46,7 +46,7 @@ config VICTOR_MPC30X select CSRC_R4K select DMA_NONCOHERENT select IRQ_MIPS_CPU - select HW_HAS_PCI + select HAVE_PCI select PCI_VR41XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -57,7 +57,7 @@ config ZAO_CAPCELLA select CSRC_R4K select DMA_NONCOHERENT select IRQ_MIPS_CPU - select HW_HAS_PCI + select HAVE_PCI select PCI_VR41XX select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN @@ -99,6 +99,6 @@ endchoice config PCI_VR41XX bool "Add PCI control unit support of NEC VR4100 series" - depends on MACH_VR41XX && HW_HAS_PCI + depends on MACH_VR41XX && HAVE_PCI default y select PCI diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 8e6d83f79e72..b2b08ad9f411 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -19,6 +19,7 @@ config PARISC select NO_BOOTMEM select BUG select BUILDTIME_EXTABLE_SORT + select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_KERNEL_BZIP2 select HAVE_KERNEL_GZIP diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e8c8970248bc..8f5a49d11385 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -168,6 +168,7 @@ config PPC select GENERIC_CPU_VULNERABILITIES if PPC_BARRIER_NOSPEC select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL + select GENERIC_PCI_IOMAP if PCI select GENERIC_SMP_IDLE_THREAD select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER @@ -190,6 +191,11 @@ config PPC select HAVE_FTRACE_MCOUNT_RECORD select HAVE_FUNCTION_GRAPH_TRACER select HAVE_FUNCTION_TRACER + # Platforms that what PCI turned unconditionally just do select PCI + # in their config node, otherwise allow the user to enable it. + # This means we can enable PCI even on platforms that don't support + # it, which is harmless except for wasted memory. + select HAVE_PCI select HAVE_GCC_PLUGINS if GCC_VERSION >= 50200 # plugin support on gcc <= 5.1 is buggy on PPC select HAVE_GENERIC_GUP select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx) @@ -945,23 +951,6 @@ config FSL_GTM config MCA bool -# Platforms that what PCI turned unconditionally just do select PCI -# in their config node. Platforms that want to choose at config -# time should select PPC_PCI_CHOICE -config PPC_PCI_CHOICE - bool - -config PCI - bool "PCI support" if PPC_PCI_CHOICE - default y if !40x && !CPM2 && !PPC_8xx && !PPC_83xx \ - && !PPC_85xx && !PPC_86xx && !GAMECUBE_COMMON - select GENERIC_PCI_IOMAP - help - Find out whether your system includes a PCI bus. PCI is the name of - a bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you say Y here, the kernel will include drivers and - infrastructure code to support PCI bus devices. - config PCI_DOMAINS def_bool PCI @@ -974,8 +963,6 @@ config PCI_8260 select PPC_INDIRECT_PCI default y -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" config HAS_RAPIDIO diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 70856a213663..9c6c77984ac3 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -272,7 +272,6 @@ config XILINX_VIRTEX440_GENERIC_BOARD config XILINX_ML510 bool "Xilinx ML510 extra support" depends on XILINX_VIRTEX440_GENERIC_BOARD - select PPC_PCI_CHOICE select XILINX_PCI if PCI select PPC_INDIRECT_PCI if PCI select PPC_I8259 if PCI diff --git a/arch/powerpc/platforms/512x/Kconfig b/arch/powerpc/platforms/512x/Kconfig index b59eab6cbb1b..3639a2a89eb4 100644 --- a/arch/powerpc/platforms/512x/Kconfig +++ b/arch/powerpc/platforms/512x/Kconfig @@ -5,7 +5,6 @@ config PPC_MPC512x select COMMON_CLK select FSL_SOC select IPIC - select PPC_PCI_CHOICE select FSL_PCI if PCI select USB_EHCI_BIG_ENDIAN_MMIO if USB_EHCI_HCD select USB_EHCI_BIG_ENDIAN_DESC if USB_EHCI_HCD diff --git a/arch/powerpc/platforms/52xx/Kconfig b/arch/powerpc/platforms/52xx/Kconfig index 55a587070342..121235b25305 100644 --- a/arch/powerpc/platforms/52xx/Kconfig +++ b/arch/powerpc/platforms/52xx/Kconfig @@ -3,7 +3,6 @@ config PPC_MPC52xx bool "52xx-based boards" depends on 6xx select COMMON_CLK - select PPC_PCI_CHOICE config PPC_MPC5200_SIMPLE bool "Generic support for simple MPC5200 based boards" diff --git a/arch/powerpc/platforms/83xx/Kconfig b/arch/powerpc/platforms/83xx/Kconfig index 071f53b0c0a0..8f65ec7feb06 100644 --- a/arch/powerpc/platforms/83xx/Kconfig +++ b/arch/powerpc/platforms/83xx/Kconfig @@ -3,7 +3,6 @@ menuconfig PPC_83xx bool "83xx-based boards" depends on 6xx select PPC_UDBG_16550 - select PPC_PCI_CHOICE select FSL_PCI if PCI select FSL_SOC select IPIC diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 68920d42b4bc..20867a23f3f2 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -5,7 +5,6 @@ menuconfig FSL_SOC_BOOKE select FSL_SOC select PPC_UDBG_16550 select MPIC - select PPC_PCI_CHOICE select FSL_PCI if PCI select SERIAL_8250_EXTENDED if SERIAL_8250 select SERIAL_8250_SHARE_IRQ if SERIAL_8250 diff --git a/arch/powerpc/platforms/86xx/Kconfig b/arch/powerpc/platforms/86xx/Kconfig index bcd179d3ed92..87220554dd6f 100644 --- a/arch/powerpc/platforms/86xx/Kconfig +++ b/arch/powerpc/platforms/86xx/Kconfig @@ -70,7 +70,6 @@ endif config MPC8641 bool - select PPC_PCI_CHOICE select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC @@ -79,7 +78,6 @@ config MPC8641 config MPC8610 bool - select PPC_PCI_CHOICE select FSL_PCI if PCI select PPC_UDBG_16550 select MPIC diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 14ef17e10ec9..2d28af3681e8 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -285,7 +285,6 @@ config CPM2 bool "Enable support for the CPM2 (Communications Processor Module)" depends on (FSL_SOC_BOOKE && PPC32) || 8260 select CPM - select PPC_PCI_CHOICE select GPIOLIB help The CPM2 (Communications Processor Module) is a coprocessor on diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 6c6a7c72cae4..c89500c0747a 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -40,14 +40,12 @@ config 40x select PPC_DCR_NATIVE select PPC_UDBG_16550 select 4xx_SOC - select PPC_PCI_CHOICE config 44x bool "AMCC 44x, 46x or 47x" select PPC_DCR_NATIVE select PPC_UDBG_16550 select 4xx_SOC - select PPC_PCI_CHOICE select PHYS_64BIT config E200 diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index 6f7525555b19..a68c14221523 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -6,7 +6,6 @@ config PPC_PS3 select USB_OHCI_LITTLE_ENDIAN select USB_OHCI_BIG_ENDIAN_MMIO select USB_EHCI_BIG_ENDIAN_MMIO - select PPC_PCI_CHOICE help This option enables support for the Sony PS3 game console and other platforms using the PS3 hypervisor. Enabling this diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index a344980287a5..071952cd4cae 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -39,8 +39,10 @@ config RISCV select SPARSE_IRQ select SYSCTL_EXCEPTION_TRACE select HAVE_ARCH_TRACEHOOK + select HAVE_PCI select MODULES_USE_ELF_RELA if MODULES select THREAD_INFO_IN_TASK + select PCI_MSI if PCI select RISCV_TIMER select GENERIC_IRQ_MULTI_HANDLER select ARCH_HAS_PTE_SPECIAL @@ -216,28 +218,12 @@ source "kernel/Kconfig.hz" endmenu -menu "Bus support" - -config PCI - bool "PCI support" - select PCI_MSI - help - This feature enables support for PCI bus system. If you say Y - here, the kernel will include drivers and infrastructure code - to support PCI bus devices. - - If you don't know what to do here, say Y. - config PCI_DOMAINS def_bool PCI config PCI_DOMAINS_GENERIC def_bool PCI -source "drivers/pci/Kconfig" - -endmenu - menu "Power management options" source kernel/power/Kconfig diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 9a9c7a6fe925..1f56c96bb1c9 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -160,15 +160,21 @@ config S390 select HAVE_MOD_ARCH_SPECIFIC select HAVE_NOP_MCOUNT select HAVE_OPROFILE + select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_RSEQ select HAVE_SYSCALL_TRACEPOINTS select HAVE_VIRT_CPU_ACCOUNTING + select IOMMU_HELPER if PCI + select IOMMU_SUPPORT if PCI select MODULES_USE_ELF_RELA + select NEED_DMA_MAP_STATE if PCI + select NEED_SG_DMA_LENGTH if PCI select NO_BOOTMEM select OLD_SIGACTION select OLD_SIGSUSPEND3 + select PCI_MSI if PCI select SPARSE_IRQ select SYSCTL_EXCEPTION_TRACE select THREAD_INFO_IN_TASK @@ -698,17 +704,6 @@ config QDIO If unsure, say Y. -menuconfig PCI - bool "PCI support" - select PCI_MSI - select IOMMU_HELPER - select IOMMU_SUPPORT - select NEED_DMA_MAP_STATE - select NEED_SG_DMA_LENGTH - - help - Enable PCI support. - if PCI config PCI_NR_FUNCTIONS @@ -719,13 +714,11 @@ config PCI_NR_FUNCTIONS This allows you to specify the maximum number of PCI functions which this kernel will support. -source "drivers/pci/Kconfig" - -endif # PCI - config PCI_DOMAINS def_bool PCI +endif # PCI + config HAS_IOMEM def_bool PCI diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 1fb7b6d72baf..2ff6855811a5 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -41,13 +41,16 @@ config SUPERH select GENERIC_IDLE_POLL_SETUP select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST + select GENERIC_PCI_IOMAP if PCI select GENERIC_SCHED_CLOCK select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER select HAVE_MOD_ARCH_SPECIFIC if DWARF_UNWINDER select MODULES_USE_ELF_RELA + select NO_GENERIC_PCI_IOPORT_MAP if PCI select OLD_SIGSUSPEND select OLD_SIGACTION + select PCI_DOMAINS if PCI select HAVE_ARCH_AUDITSYSCALL select HAVE_FUTEX_CMPXCHG if FUTEX select HAVE_NMI @@ -131,9 +134,6 @@ config SYS_SUPPORTS_SMP config SYS_SUPPORTS_NUMA bool -config SYS_SUPPORTS_PCI - bool - config STACKTRACE_SUPPORT def_bool y @@ -858,22 +858,9 @@ config MAPLE Dreamcast with a serial line terminal or a remote network connection. -config PCI - bool "PCI support" - depends on SYS_SUPPORTS_PCI - select PCI_DOMAINS - select GENERIC_PCI_IOMAP - select NO_GENERIC_PCI_IOPORT_MAP - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you have PCI, say Y, otherwise N. - config PCI_DOMAINS bool -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" endmenu diff --git a/arch/sh/boards/Kconfig b/arch/sh/boards/Kconfig index 6394b4f0a69b..b9a37057b77a 100644 --- a/arch/sh/boards/Kconfig +++ b/arch/sh/boards/Kconfig @@ -101,7 +101,7 @@ config SH_7751_SOLUTION_ENGINE config SH_7780_SOLUTION_ENGINE bool "SolutionEngine7780" select SOLUTION_ENGINE - select SYS_SUPPORTS_PCI + select HAVE_PCI depends on CPU_SUBTYPE_SH7780 help Select 7780 SolutionEngine if configuring for a Renesas SH7780 @@ -129,7 +129,7 @@ config SH_HP6XX config SH_DREAMCAST bool "Dreamcast" - select SYS_SUPPORTS_PCI + select HAVE_PCI depends on CPU_SUBTYPE_SH7091 help Select Dreamcast if configuring for a SEGA Dreamcast. @@ -139,7 +139,7 @@ config SH_SH03 bool "Interface CTP/PCI-SH03" depends on CPU_SUBTYPE_SH7751 select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help CTP/PCI-SH03 is a CPU module computer that is produced by Interface Corporation. @@ -149,7 +149,7 @@ config SH_SECUREEDGE5410 bool "SecureEdge5410" depends on CPU_SUBTYPE_SH7751R select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select SecureEdge5410 if configuring for a SnapGear SH board. This includes both the OEM SecureEdge products as well as the @@ -158,7 +158,7 @@ config SH_SECUREEDGE5410 config SH_RTS7751R2D bool "RTS7751R2D" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI select IO_TRAPPED if MMU help Select RTS7751R2D if configuring for a Renesas Technology @@ -176,7 +176,7 @@ config SH_RSK config SH_SDK7780 bool "SDK7780R3" depends on CPU_SUBTYPE_SH7780 - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select SDK7780 if configuring for a Renesas SH7780 SDK7780R3 evaluation board. @@ -184,7 +184,7 @@ config SH_SDK7780 config SH_SDK7786 bool "SDK7786" depends on CPU_SUBTYPE_SH7786 - select SYS_SUPPORTS_PCI + select HAVE_PCI select NO_IOPORT_MAP if !PCI select HAVE_SRAM_POOL select REGULATOR_FIXED_VOLTAGE if REGULATOR @@ -195,7 +195,7 @@ config SH_SDK7786 config SH_HIGHLANDER bool "Highlander" depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI + select HAVE_PCI select IO_TRAPPED if MMU config SH_SH7757LCR @@ -207,7 +207,7 @@ config SH_SH7757LCR config SH_SH7785LCR bool "SH7785LCR" depends on CPU_SUBTYPE_SH7785 - select SYS_SUPPORTS_PCI + select HAVE_PCI config SH_SH7785LCR_29BIT_PHYSMAPS bool "SH7785LCR 29bit physmaps" @@ -229,7 +229,7 @@ config SH_URQUELL bool "Urquell" depends on CPU_SUBTYPE_SH7786 select GPIOLIB - select SYS_SUPPORTS_PCI + select HAVE_PCI select NO_IOPORT_MAP if !PCI config SH_MIGOR @@ -302,7 +302,7 @@ config SH_SH4202_MICRODEV config SH_LANDISK bool "LANDISK" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI help I-O DATA DEVICE, INC. "LANDISK Series" support. @@ -310,7 +310,7 @@ config SH_TITAN bool "TITAN" depends on CPU_SUBTYPE_SH7751R select CPU_HAS_IPR_IRQ - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select Titan if you are configuring for a Nimble Microsystems NetEngine NP51R. @@ -325,7 +325,7 @@ config SH_SHMIN config SH_LBOX_RE2 bool "L-BOX RE2" depends on CPU_SUBTYPE_SH7751R - select SYS_SUPPORTS_PCI + select HAVE_PCI help Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2. @@ -346,7 +346,7 @@ config SH_MAGIC_PANEL_R2 config SH_CAYMAN bool "Hitachi Cayman" depends on CPU_SUBTYPE_SH5_101 || CPU_SUBTYPE_SH5_103 - select SYS_SUPPORTS_PCI + select HAVE_PCI select ARCH_MIGHT_HAVE_PC_SERIO config SH_POLARIS @@ -380,7 +380,7 @@ config SH_APSH4A3A config SH_APSH4AD0A bool "AP-SH4AD-0A" select SH_ALPHA_BOARD - select SYS_SUPPORTS_PCI + select HAVE_PCI select REGULATOR_FIXED_VOLTAGE if REGULATOR depends on CPU_SUBTYPE_SH7786 help diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index e6f2a38d2e61..fc311b8dc46b 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -21,6 +21,7 @@ config SPARC select HAVE_ARCH_KGDB if !SMP || SPARC64 select HAVE_ARCH_TRACEHOOK select HAVE_EXIT_THREAD + select HAVE_PCI select SYSCTL_EXCEPTION_TRACE select RTC_CLASS select RTC_DRV_M48T59 @@ -474,18 +475,6 @@ config SUN_LDOMS Say Y here is you want to support virtual devices via Logical Domains. -config PCI - bool "Support for PCI and PS/2 keyboard/mouse" - help - Find out whether your system includes a PCI bus. PCI is the name of - a bus system, i.e. the way the CPU talks to the other stuff inside - your box. If you say Y here, the kernel will include drivers and - infrastructure code to support PCI bus devices. - - CONFIG_PCI is needed for all JavaStation's (including MrCoffee), - CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC. - All of these platforms are extremely obscure, so say N if unsure. - config PCI_DOMAINS def_bool PCI if SPARC64 @@ -520,8 +509,6 @@ config SPARC_GRPCI2 help Say Y here to include the GRPCI2 Host Bridge Driver. -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" config SUN_OPENPROMFS diff --git a/arch/um/Kconfig b/arch/um/Kconfig index 6b9938919f0b..de982541a059 100644 --- a/arch/um/Kconfig +++ b/arch/um/Kconfig @@ -31,9 +31,6 @@ config ISA config SBUS bool -config PCI - bool - config PCMCIA bool diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig index 60eae744d8fd..601dcad2560e 100644 --- a/arch/unicore32/Kconfig +++ b/arch/unicore32/Kconfig @@ -11,6 +11,7 @@ config UNICORE32 select GENERIC_ATOMIC64 select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA + select HAVE_PCI select VIRT_TO_BUS select ARCH_HAVE_CUSTOM_GPIO_H select GENERIC_FIND_FIRST_BIT @@ -119,16 +120,6 @@ endmenu menu "Bus support" -config PCI - bool "PCI Support" - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" endmenu diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 1a0be022f91d..5816e20a3ff9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -178,6 +178,7 @@ config X86 select HAVE_PERF_EVENTS select HAVE_PERF_EVENTS_NMI select HAVE_HARDLOCKUP_DETECTOR_PERF if PERF_EVENTS && HAVE_PERF_EVENTS_NMI + select HAVE_PCI select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP select HAVE_RCU_TABLE_FREE if PARAVIRT @@ -2567,15 +2568,6 @@ endmenu menu "Bus options (PCI etc.)" -config PCI - bool "PCI support" - default y - ---help--- - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - choice prompt "PCI access mode" depends on X86_32 && PCI @@ -2658,8 +2650,6 @@ config PCI_CNB20LE_QUIRK You should say N unless you know you need this. -source "drivers/pci/Kconfig" - config ISA_BUS bool "ISA bus support on modern systems" if EXPERT help diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 0eb9f92f3717..f08a74eeb1fe 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -69,6 +69,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_PCI=y CONFIG_PCIEPORTBUS=y CONFIG_PCI_MSI=y CONFIG_PCCARD=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index e32fc1f274d8..d053ae4a8098 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -67,6 +67,7 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_X86_ACPI_CPUFREQ=y +CONFIG_PCI=y CONFIG_PCI_MMCONFIG=y CONFIG_PCIEPORTBUS=y CONFIG_PCCARD=y diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index b9ad83a0ee5d..f057c16a48a5 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -30,6 +30,7 @@ config XTENSA select HAVE_IRQ_TIME_ACCOUNTING select HAVE_MEMBLOCK select HAVE_OPROFILE + select HAVE_PCI select HAVE_PERF_EVENTS select HAVE_STACKPROTECTOR select IRQ_DOMAIN @@ -384,21 +385,6 @@ config XTENSA_CALIBRATE_CCOUNT config SERIAL_CONSOLE def_bool n -menu "Bus options" - -config PCI - bool "PCI support" - default y - help - Find out whether you have a PCI motherboard. PCI is the name of a - bus system, i.e. the way the CPU talks to the other stuff inside - your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or - VESA. If you have PCI, say Y, otherwise N. - -source "drivers/pci/Kconfig" - -endmenu - menu "Platform options" choice diff --git a/arch/xtensa/configs/common_defconfig b/arch/xtensa/configs/common_defconfig index 4bcc76b02109..fa9389869154 100644 --- a/arch/xtensa/configs/common_defconfig +++ b/arch/xtensa/configs/common_defconfig @@ -1,3 +1,4 @@ +CONFIG_PCI=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_LOG_BUF_SHIFT=14 diff --git a/arch/xtensa/configs/iss_defconfig b/arch/xtensa/configs/iss_defconfig index 4bb5b76d9524..818849bb7736 100644 --- a/arch/xtensa/configs/iss_defconfig +++ b/arch/xtensa/configs/iss_defconfig @@ -4,7 +4,7 @@ CONFIG_EXPERT=y CONFIG_SYSCTL_SYSCALL=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -# CONFIG_PCI is not set +CONFIG_PCI=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,38400 eth0=tuntap,,tap0 ip=192.168.168.5:192.168.168.1 root=nfs nfsroot=192.168.168.1:/opt/montavista/pro/devkit/xtensa/linux_be/target memmap=128M@0" # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set diff --git a/drivers/Kconfig b/drivers/Kconfig index ab4d43923c4d..059573823387 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -1,7 +1,11 @@ # SPDX-License-Identifier: GPL-2.0 menu "Device Drivers" +# Keep I/O buses first + source "drivers/amba/Kconfig" +source "drivers/pci/Kconfig" + source "drivers/base/Kconfig" diff --git a/drivers/parisc/Kconfig b/drivers/parisc/Kconfig index 5a48b5606110..5bbfea1a019c 100644 --- a/drivers/parisc/Kconfig +++ b/drivers/parisc/Kconfig @@ -63,17 +63,6 @@ config ISA If you want to plug an ISA card into your EISA bus, say Y here. Most people should say N. -config PCI - bool "PCI support" - help - All recent HP machines have PCI slots, and you should say Y here - if you have a recent machine. If you are convinced you do not have - PCI slots in your machine (eg a 712), then you may say "N" here. - Beware that some GSC cards have a Dino onboard and PCI inside them, - so it may be safest to say "Y" anyway. - -source "drivers/pci/Kconfig" - config GSC_DINO bool "GSCtoPCI/Dino PCI support" depends on PCI && GSC diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 56ff8f6d31fc..6ec796c5931f 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -3,6 +3,18 @@ # PCI configuration # +config HAVE_PCI + bool + +menuconfig PCI + bool "PCI support" + depends on HAVE_PCI + + help + This option enables support for the PCI local bus, including + support for PCI-X and the fundations for PCI Express support. + Say 'Y' here unless you know what you are doing. + source "drivers/pci/pcie/Kconfig" config PCI_MSI -- 2.19.1
