Re: [PATCH V2 1/4] pm80xx : Fix for phy enable/disable functionality.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 11, 2018 at 10:48 AM Viswas G <Viswas.G@xxxxxxxxxxxxx> wrote:
>
> From: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
>
> Added proper mask for phy id in mpi_phy_stop_resp().
>
>         V2:
>                 -Initialized the PM8001F_RUN_TIME flag in
>                  pm8001_pci_probe().
>                 -Differentiated PHY_LINK_UP state for SPC and SPCv
>                  controller.
>                 -Used PHY_LINK_DOWN macro for phy state down.
>
> Signed-off-by: Deepak Ukey <deepak.ukey@xxxxxxxxxxxxx>
> Signed-off-by: Viswas G <Viswas.G@xxxxxxxxxxxxx>
Acked-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxxx>
Thanks!
> ---
>  drivers/scsi/pm8001/pm8001_defs.h |  8 ++++++++
>  drivers/scsi/pm8001/pm8001_hwi.c  |  3 ++-
>  drivers/scsi/pm8001/pm8001_hwi.h  |  4 ----
>  drivers/scsi/pm8001/pm8001_init.c |  3 ++-
>  drivers/scsi/pm8001/pm8001_sas.c  | 28 +++++++++++++++++++++++++---
>  drivers/scsi/pm8001/pm80xx_hwi.c  | 14 ++++++++------
>  drivers/scsi/pm8001/pm80xx_hwi.h  |  6 ++++--
>  7 files changed, 49 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/scsi/pm8001/pm8001_defs.h b/drivers/scsi/pm8001/pm8001_defs.h
> index 199527dbaaa1..48e0624ecc68 100644
> --- a/drivers/scsi/pm8001/pm8001_defs.h
> +++ b/drivers/scsi/pm8001/pm8001_defs.h
> @@ -132,4 +132,12 @@ enum pm8001_hba_info_flags {
>         PM8001F_RUN_TIME        = (1U << 1),
>  };
>
> +/**
> + * Phy Status
> + */
> +#define PHY_LINK_DISABLE       0x00
> +#define PHY_LINK_DOWN          0x01
> +#define PHY_STATE_LINK_UP_SPCV 0x2
> +#define PHY_STATE_LINK_UP_SPC  0x1
> +
>  #endif
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
> index 4dd6cad330e8..a14bf50a76d7 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.c
> +++ b/drivers/scsi/pm8001/pm8001_hwi.c
> @@ -3810,7 +3810,8 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void* piomb)
>                         " status = %x\n", status));
>                 if (status == 0) {
>                         phy->phy_state = 1;
> -                       if (pm8001_ha->flags == PM8001F_RUN_TIME)
> +                       if (pm8001_ha->flags == PM8001F_RUN_TIME &&
> +                                       phy->enable_completion != NULL)
>                                 complete(phy->enable_completion);
>                 }
>                 break;
> diff --git a/drivers/scsi/pm8001/pm8001_hwi.h b/drivers/scsi/pm8001/pm8001_hwi.h
> index e4867e690c84..6d91e2446542 100644
> --- a/drivers/scsi/pm8001/pm8001_hwi.h
> +++ b/drivers/scsi/pm8001/pm8001_hwi.h
> @@ -131,10 +131,6 @@
>  #define LINKRATE_30                    (0x02 << 8)
>  #define LINKRATE_60                    (0x04 << 8)
>
> -/* for phy state */
> -
> -#define PHY_STATE_LINK_UP_SPC          0x1
> -
>  /* for new SPC controllers MEMBASE III is shared between BIOS and DATA */
>  #define GSM_SM_BASE                    0x4F0000
>  struct mpi_msg_hdr{
> diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
> index 7a697ca68501..501830caba21 100644
> --- a/drivers/scsi/pm8001/pm8001_init.c
> +++ b/drivers/scsi/pm8001/pm8001_init.c
> @@ -121,7 +121,7 @@ static void pm8001_phy_init(struct pm8001_hba_info *pm8001_ha, int phy_id)
>  {
>         struct pm8001_phy *phy = &pm8001_ha->phy[phy_id];
>         struct asd_sas_phy *sas_phy = &phy->sas_phy;
> -       phy->phy_state = 0;
> +       phy->phy_state = PHY_LINK_DISABLE;
>         phy->pm8001_ha = pm8001_ha;
>         sas_phy->enabled = (phy_id < pm8001_ha->chip->n_phy) ? 1 : 0;
>         sas_phy->class = SAS;
> @@ -1067,6 +1067,7 @@ static int pm8001_pci_probe(struct pci_dev *pdev,
>         if (rc)
>                 goto err_out_shost;
>         scsi_scan_host(pm8001_ha->shost);
> +       pm8001_ha->flags = PM8001F_RUN_TIME;
>         return 0;
>
>  err_out_shost:
> diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
> index 947d6017d004..d8249675371e 100644
> --- a/drivers/scsi/pm8001/pm8001_sas.c
> +++ b/drivers/scsi/pm8001/pm8001_sas.c
> @@ -157,9 +157,12 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
>         int rc = 0, phy_id = sas_phy->id;
>         struct pm8001_hba_info *pm8001_ha = NULL;
>         struct sas_phy_linkrates *rates;
> +       struct sas_ha_struct *sas_ha;
> +       struct pm8001_phy *phy;
>         DECLARE_COMPLETION_ONSTACK(completion);
>         unsigned long flags;
>         pm8001_ha = sas_phy->ha->lldd_ha;
> +       phy = &pm8001_ha->phy[phy_id];
>         pm8001_ha->phy[phy_id].enable_completion = &completion;
>         switch (func) {
>         case PHY_FUNC_SET_LINK_RATE:
> @@ -172,7 +175,7 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
>                         pm8001_ha->phy[phy_id].maximum_linkrate =
>                                 rates->maximum_linkrate;
>                 }
> -               if (pm8001_ha->phy[phy_id].phy_state == 0) {
> +               if (pm8001_ha->phy[phy_id].phy_state ==  PHY_LINK_DISABLE) {
>                         PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
>                         wait_for_completion(&completion);
>                 }
> @@ -180,7 +183,7 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
>                                               PHY_LINK_RESET);
>                 break;
>         case PHY_FUNC_HARD_RESET:
> -               if (pm8001_ha->phy[phy_id].phy_state == 0) {
> +               if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
>                         PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
>                         wait_for_completion(&completion);
>                 }
> @@ -188,7 +191,7 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
>                                               PHY_HARD_RESET);
>                 break;
>         case PHY_FUNC_LINK_RESET:
> -               if (pm8001_ha->phy[phy_id].phy_state == 0) {
> +               if (pm8001_ha->phy[phy_id].phy_state == PHY_LINK_DISABLE) {
>                         PM8001_CHIP_DISP->phy_start_req(pm8001_ha, phy_id);
>                         wait_for_completion(&completion);
>                 }
> @@ -200,6 +203,25 @@ int pm8001_phy_control(struct asd_sas_phy *sas_phy, enum phy_func func,
>                                               PHY_LINK_RESET);
>                 break;
>         case PHY_FUNC_DISABLE:
> +               if (pm8001_ha->chip_id != chip_8001) {
> +                       if (pm8001_ha->phy[phy_id].phy_state ==
> +                               PHY_STATE_LINK_UP_SPCV) {
> +                               sas_ha = pm8001_ha->sas;
> +                               sas_phy_disconnected(&phy->sas_phy);
> +                               sas_ha->notify_phy_event(&phy->sas_phy,
> +                                       PHYE_LOSS_OF_SIGNAL);
> +                               phy->phy_attached = 0;
> +                       }
> +               } else {
> +                       if (pm8001_ha->phy[phy_id].phy_state ==
> +                               PHY_STATE_LINK_UP_SPC) {
> +                               sas_ha = pm8001_ha->sas;
> +                               sas_phy_disconnected(&phy->sas_phy);
> +                               sas_ha->notify_phy_event(&phy->sas_phy,
> +                                       PHYE_LOSS_OF_SIGNAL);
> +                               phy->phy_attached = 0;
> +                       }
> +               }
>                 PM8001_CHIP_DISP->phy_stop_req(pm8001_ha, phy_id);
>                 break;
>         case PHY_FUNC_GET_EVENTS:
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
> index 42f0405601ad..91ff6a44e9d9 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.c
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.c
> @@ -3118,8 +3118,9 @@ static int mpi_phy_start_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
>                 pm8001_printk("phy start resp status:0x%x, phyid:0x%x\n",
>                                 status, phy_id));
>         if (status == 0) {
> -               phy->phy_state = 1;
> -               if (pm8001_ha->flags == PM8001F_RUN_TIME)
> +               phy->phy_state = PHY_LINK_DOWN;
> +               if (pm8001_ha->flags == PM8001F_RUN_TIME &&
> +                               phy->enable_completion != NULL)
>                         complete(phy->enable_completion);
>         }
>         return 0;
> @@ -3211,7 +3212,7 @@ static int mpi_hw_event(struct pm8001_hba_info *pm8001_ha, void *piomb)
>                         return 0;
>                 }
>                 phy->phy_attached = 0;
> -               phy->phy_state = 0;
> +               phy->phy_state = PHY_LINK_DISABLE;
>                 break;
>         case HW_EVENT_PORT_INVALID:
>                 PM8001_MSG_DBG(pm8001_ha,
> @@ -3384,13 +3385,14 @@ static int mpi_phy_stop_resp(struct pm8001_hba_info *pm8001_ha, void *piomb)
>         u32 status =
>                 le32_to_cpu(pPayload->status);
>         u32 phyid =
> -               le32_to_cpu(pPayload->phyid);
> +               le32_to_cpu(pPayload->phyid) & 0xFF;
>         struct pm8001_phy *phy = &pm8001_ha->phy[phyid];
>         PM8001_MSG_DBG(pm8001_ha,
>                         pm8001_printk("phy:0x%x status:0x%x\n",
>                                         phyid, status));
> -       if (status == 0)
> -               phy->phy_state = 0;
> +       if (status == PHY_STOP_SUCCESS ||
> +               status == PHY_STOP_ERR_DEVICE_ATTACHED)
> +               phy->phy_state = PHY_LINK_DISABLE;
>         return 0;
>  }
>
> diff --git a/drivers/scsi/pm8001/pm80xx_hwi.h b/drivers/scsi/pm8001/pm80xx_hwi.h
> index 889e69ce3689..dead05a55aab 100644
> --- a/drivers/scsi/pm8001/pm80xx_hwi.h
> +++ b/drivers/scsi/pm8001/pm80xx_hwi.h
> @@ -170,6 +170,10 @@
>  #define LINKRATE_60                    (0x04 << 8)
>  #define LINKRATE_120                   (0x08 << 8)
>
> +/*phy_stop*/
> +#define PHY_STOP_SUCCESS               0x00
> +#define PHY_STOP_ERR_DEVICE_ATTACHED   0x1046
> +
>  /* phy_profile */
>  #define SAS_PHY_ANALOG_SETTINGS_PAGE   0x04
>  #define PHY_DWORD_LENGTH               0xC
> @@ -216,8 +220,6 @@
>  #define SAS_DOPNRJT_RTRY_TMO            128
>  #define SAS_COPNRJT_RTRY_TMO            128
>
> -/* for phy state */
> -#define PHY_STATE_LINK_UP_SPCV         0x2
>  /*
>    Making ORR bigger than IT NEXUS LOSS which is 2000000us = 2 second.
>    Assuming a bigger value 3 second, 3000000/128 = 23437.5 where 128
> --
> 2.19.0-rc1
>


-- 
Jack Wang
Linux Kernel Developer

ProfitBricks GmbH
Greifswalder Str. 207
D - 10405 Berlin

Tel:       +49 30 577 008  042
Fax:      +49 30 577 008 299
Email:    jinpu.wang@xxxxxxxxxxxxxxxx
URL:      https://www.profitbricks.de

Sitz der Gesellschaft: Berlin
Registergericht: Amtsgericht Charlottenburg, HRB 125506 B
Geschäftsführer: Achim Weiss, Matthias Steinberg, Christoph Steffens




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux