Re: blk-mq 5-8 times slower for bmap-tools

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Aug 20, 2018 at 06:15:10PM +0800, Ming Lei wrote:
> On Mon, Aug 20, 2018 at 11:56:26AM +0200, Ricardo Ribalda Delgado wrote:
> > Hi
> > On Mon, Aug 20, 2018 at 11:55 AM Ming Lei <ming.lei@xxxxxxxxxx> wrote:
> > >
> > > On Mon, Aug 20, 2018 at 11:04:08AM +0200, Ricardo Ribalda Delgado wrote:
> > > > Hello Ming
> > > > On Mon, Aug 20, 2018 at 10:30 AM Ming Lei <ming.lei@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Mon, Aug 20, 2018 at 09:39:45AM +0200, Ricardo Ribalda Delgado wrote:
> > > > > > Some measurements:
> > > > > >
> > > > > > Please note that even when iostat shows 0.0 the LED on the device was
> > > > > > blinking as if there was some activity going on.
> > > > > >
> > > > > > Thanks!
> > > > > >
> > > > > > KERNEL:
> > > > > > Linux neopili 4.17.0-1-amd64 #1 SMP Debian 4.17.8-1 (2018-07-20)
> > > > > > x86_64 GNU/Linux
> > > > > >
> > > > > > DISK:
> > > > > > [247530.712686] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
> > > > > > [247530.738906] usb 2-2: New USB device found, idVendor=174c,
> > > > > > idProduct=5136, bcdDevice= 1.00
> > > > > > [247530.738913] usb 2-2: New USB device strings: Mfr=2, Product=3,
> > > > > > SerialNumber=1
> > > > > > [247530.738918] usb 2-2: Product: 91686
> > > > > > [247530.738921] usb 2-2: Manufacturer: Delock
> > > > > > [247530.738925] usb 2-2: SerialNumber: 300000003B45
> > > > > > [247530.750709] scsi host6: uas
> > > > > > [247530.751377] scsi 6:0:0:0: Direct-Access     ASMT     2105
> > > > > >    0    PQ: 0 ANSI: 6
> > > > > > [247530.752174] sd 6:0:0:0: Attached scsi generic sg2 type 0
> > > > > > [247530.752616] sd 6:0:0:0: [sdb] 31277232 512-byte logical blocks:
> > > > > > (16.0 GB/14.9 GiB)
> > > > > > [247530.752740] sd 6:0:0:0: [sdb] Write Protect is off
> > > > > > [247530.752742] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
> > > > > > [247530.752905] sd 6:0:0:0: [sdb] Write cache: enabled, read cache:
> > > > > > enabled, doesn't support DPO or FUA
> > > > > > [247530.755912]  sdb: sdb1 sdb2
> > > > > > [247530.756832] sd 6:0:0:0: [sdb] Attached SCSI disk
> > > > > >
> > > > > >
> > > > > > TL/DR:
> > > > > > CFQ: 21.7
> > > > > > NOOP: 21.7
> > > > > > DEADLINE: 21.7
> > > > > > MQ-DEADLINE: 175.2
> > > > > > NONE: 236.4
> > > > > > KYBER: 174.9
> > > > >
> > > > > Thanks for your test!
> > > > >
> > > > > One problem found from your iostat log is that looks there is ~30sec
> > > > > idle period between IO activities when blk-mq is enabled.
> > > >
> > > > During all the test the LED on the device was blinking.
> > > >
> > > > But a closer look to dmesg reveals a lot of this messages:
> > > >
> > > > [  196.929811] sd 6:0:0:0: [sdb] tag#3 data cmplt err -71 uas-tag 1
> > > > inflight: CMD
> > >
> > > -71 is -EPROTO, which is returned from xhci driver, usually it means
> > > there is error from the USB device side.
> > >
> > > > [  196.929822] sd 6:0:0:0: [sdb] tag#3 CDB: Write(10) 2a 00 00 04 00
> > > > 68 00 04 00 00
> > > > [  227.764379] sd 6:0:0:0: [sdb] tag#4 uas_eh_abort_handler 0 uas-tag
> > > > 2 inflight: CMD OUT
> > > > [  227.764389] sd 6:0:0:0: [sdb] tag#4 CDB: Write(10) 2a 00 00 04 04
> > > > 68 00 04 00 00
> > > > [  227.766555] sd 6:0:0:0: [sdb] tag#3 uas_eh_abort_handler 0 uas-tag
> > > > 1 inflight: CMD
> > > > [  227.766562] sd 6:0:0:0: [sdb] tag#3 CDB: Write(10) 2a 00 00 04 00
> > > > 68 00 04 00 00
> > > > [  227.784312] scsi host6: uas_eh_device_reset_handler start
> > > > [  227.913672] usb 2-2: reset SuperSpeed USB device number 3 using xhci_hcd
> > > > [  227.944842] scsi host6: uas_eh_device_reset_handler success
> > > > [  231.416133] sd 6:0:0:0: [sdb] tag#1 data cmplt err -71 uas-tag 10
> > > > inflight: CMD
> > > > [  231.416147] sd 6:0:0:0: [sdb] tag#1 CDB: Write(10) 2a 00 00 06 d5
> > > > e8 00 04 00 00
> > > >
> > > > And they take around 30 secons (227-196)
> > > >
> > > >
> > > > Maybe this is a hw issue? I will bring the reader home tonight and see
> > > > if I can replicate the bug with my notebook
> > >
> > > It might be.
> > >
> > > Is there such message in case of non-blk-mq?
> > 
> > No, only with blk-mq
> 
> OK, seems something doesn't work as expected in either scsi_mq or uas
> driver.

Maybe it is just an uas issue, since I can reproduce the following issue
with either scsi_mq or not on v4.18, and the uas is emulated via qemu.

[  116.988843] sd 3:0:0:0: [sde] tag#10 uas_eh_abort_handler 0 uas-tag 9 inflight: CMD OUT
[  116.988859] sd 3:0:0:0: [sde] tag#10 CDB: Write(10) 2a 00 0d d9 ec 08 00 00 08 00
[  116.991121] sd 3:0:0:0: [sde] tag#12 uas_eh_abort_handler 0 uas-tag 1 inflight:
[  116.991129] sd 3:0:0:0: [sde] tag#12 CDB: Write(10) 2a 00 0d d9 35 b0 00 00 08 00
[  116.991136] sd 3:0:0:0: [sde] tag#2 uas_eh_abort_handler 0 uas-tag 8 inflight:
[  116.991140] sd 3:0:0:0: [sde] tag#2 CDB: Write(10) 2a 00 0d 9c 7f b8 00 00 08 00
[  116.991146] sd 3:0:0:0: [sde] tag#5 uas_eh_abort_handler 0 uas-tag 7 inflight:
[  116.991149] sd 3:0:0:0: [sde] tag#5 CDB: Write(10) 2a 00 0d 87 0d c8 00 00 08 00
[  116.991155] sd 3:0:0:0: [sde] tag#9 uas_eh_abort_handler 0 uas-tag 14 inflight:
[  116.991158] sd 3:0:0:0: [sde] tag#9 CDB: Write(10) 2a 00 0d 84 fa b0 00 00 08 00
[  116.991163] sd 3:0:0:0: [sde] tag#6 uas_eh_abort_handler 0 uas-tag 6 inflight:
[  116.991167] sd 3:0:0:0: [sde] tag#6 CDB: Write(10) 2a 00 0d 5b f2 e0 00 00 08 00
[  116.991173] sd 3:0:0:0: [sde] tag#13 uas_eh_abort_handler 0 uas-tag 5 inflight:
[  116.991176] sd 3:0:0:0: [sde] tag#13 CDB: Write(10) 2a 00 0d 27 dd a0 00 00 08 00
[  116.991181] sd 3:0:0:0: [sde] tag#8 uas_eh_abort_handler 0 uas-tag 13 inflight:
[  116.991185] sd 3:0:0:0: [sde] tag#8 CDB: Write(10) 2a 00 0d 14 03 08 00 00 08 00
[  116.991190] sd 3:0:0:0: [sde] tag#11 uas_eh_abort_handler 0 uas-tag 2 inflight:
[  116.991194] sd 3:0:0:0: [sde] tag#11 CDB: Write(10) 2a 00 0c f8 10 d0 00 00 08 00
[  116.991199] sd 3:0:0:0: [sde] tag#0 uas_eh_abort_handler 0 uas-tag 12 inflight:
[  116.991203] sd 3:0:0:0: [sde] tag#0 CDB: Write(10) 2a 00 0c f7 5f 00 00 00 08 00
[  116.991208] sd 3:0:0:0: [sde] tag#7 uas_eh_abort_handler 0 uas-tag 4 inflight:
[  116.991211] sd 3:0:0:0: [sde] tag#7 CDB: Write(10) 2a 00 0c c1 7d 98 00 00 08 00
[  116.996641] scsi host3: uas_eh_device_reset_handler start
[  117.112534] usb 3-1: reset SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[  117.128255] scsi host3: uas_eh_device_reset_handler success
[ming@VM]$
[ming@VM]$
[ming@VM]$cat /proc/cmdline
ftrace_dump_on_oops root=UUID=a2850628-61dd-42ee-8081-5f482a65314a ro console=tty1 console=ttyS0,115200n8 earlyprintk rootfstype=ext4 rw loglevel=9 virtio_blk.queue_depth=128 scsi_mod.use_blk_mq=0 no_console_suspend dm_mod.use_blk_mq=1 ip=dhcp iommu=force intel_iommu=on hugepages=0 debug kmemleak=off scsi_transport_iscsi.debug_session=1 scsi_transport_iscsi.debug_conn=1


thanks,
Ming



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux