On Thu, Aug 9, 2018 at 2:10 AM Sayali Lokhande <sayalil@xxxxxxxxxxxxxx> wrote:
>
> This patch adds configfs support to provision UFS device at
> runtime. This feature can be primarily useful in factory or
> assembly line as some devices may be required to be configured
> multiple times during initial system development phase.
> Configuration Descriptors can be written multiple times until
> bConfigDescrLock attribute is zero.
>
> Configuration descriptor buffer consists of Device and Unit
> descriptor configurable parameters which are parsed from vendor
> specific provisioning file and then passed via configfs node at
> runtime to provision ufs device.
> CONFIG_CONFIGFS_FS needs to be enabled for using this feature.
>
> Usage:
> 1) To read current configuration descriptor :
> cat /config/XXXX.ufshc/ufs_provision
> 2) To provision ufs device:
> echo <config_desc_buf> > /config/XXXX.ufshc/ufs_provision
>
> Signed-off-by: Sayali Lokhande <sayalil@xxxxxxxxxxxxxx>
> ---
> Documentation/ABI/testing/configfs-driver-ufs | 18 +++
> drivers/scsi/ufs/Kconfig | 10 ++
> drivers/scsi/ufs/Makefile | 1 +
> drivers/scsi/ufs/ufs-configfs.c | 159 ++++++++++++++++++++++++++
> drivers/scsi/ufs/ufshcd.c | 7 +-
> drivers/scsi/ufs/ufshcd.h | 10 ++
> 6 files changed, 204 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/ABI/testing/configfs-driver-ufs
> create mode 100644 drivers/scsi/ufs/ufs-configfs.c
>
> diff --git a/Documentation/ABI/testing/configfs-driver-ufs b/Documentation/ABI/testing/configfs-driver-ufs
> new file mode 100644
> index 0000000..eeee499c
> --- /dev/null
> +++ b/Documentation/ABI/testing/configfs-driver-ufs
> @@ -0,0 +1,18 @@
> +What: /config/ufshcd/ufs_provision
> +Date: Jun 2018
> +KernelVersion: 4.14
> +Description:
> + This file shows the current ufs configuration descriptor set in device.
> + This can be used to provision ufs device if bConfigDescrLock is 0.
> + For more details, refer 14.1.6.3 Configuration Descriptor and
> + Table 14-12 - Unit Descriptor configurable parameters from specs for
> + description of each configuration descriptor parameter.
> + Configuration descriptor buffer needs to be passed in space separated
> + format specificied as below:
> + echo <bLength> <bDescriptorIDN> <bConfDescContinue> <bBootEnable>
> + <bDescrAccessEn> <bInitPowerMode> <bHighPriorityLUN>
> + <bSecureRemovalType> <bInitActiveICCLevel> <wPeriodicRTCUpdate>
> + <0Bh:0Fh_ReservedAs_0> <bLUEnable> <bBootLunID> <bLUWriteProtect>
> + <bMemoryType> <dNumAllocUnits> <bDataReliability> <bLogicalBlockSize>
> + <bProvisioningType> <wContextCapabilities> <0Dh:0Fh_ReservedAs_0>
> + > /config/XXXX.ufshc/ufs_provision
> diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
> index e27b4d4..a9a0a58 100644
> --- a/drivers/scsi/ufs/Kconfig
> +++ b/drivers/scsi/ufs/Kconfig
> @@ -100,3 +100,13 @@ config SCSI_UFS_QCOM
>
> Select this if you have UFS controller on QCOM chipset.
> If unsure, say N.
> +
> +config UFS_PROVISION
> + tristate "Runtime UFS Provisioning support"
> + depends on SCSI_UFSHCD && CONFIGFS_FS
> + help
> + This enables runtime UFS provisioning support. This can be used
> + primarily during assembly line as some devices may be required to
> + be configured multiple times during initial development phase.
> +
> + If unsure, say N.
> diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
> index 918f579..00110ea 100644
> --- a/drivers/scsi/ufs/Makefile
> +++ b/drivers/scsi/ufs/Makefile
> @@ -5,5 +5,6 @@ obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-d
> obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
> obj-$(CONFIG_SCSI_UFSHCD) += ufshcd-core.o
> ufshcd-core-objs := ufshcd.o ufs-sysfs.o
> +obj-$(CONFIG_UFS_PROVISION) += ufs-configfs.o
> obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
> obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
> diff --git a/drivers/scsi/ufs/ufs-configfs.c b/drivers/scsi/ufs/ufs-configfs.c
> new file mode 100644
> index 0000000..cd1a227
> --- /dev/null
> +++ b/drivers/scsi/ufs/ufs-configfs.c
> @@ -0,0 +1,159 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +// Copyright (c) 2018, Linux Foundation.
> +
> +#include <linux/configfs.h>
> +#include <linux/err.h>
> +#include <linux/string.h>
> +
> +#include "ufs.h"
> +#include "ufshcd.h"
> +
> +static inline struct ufs_hba *config_item_to_hba(struct config_item *item)
> +{
> + struct config_group *group = to_config_group(item);
> + struct configfs_subsystem *subsys = to_configfs_subsystem(group);
> + struct ufs_hba *hba = container_of(subsys, struct ufs_hba, subsys);
> +
> + return subsys ? hba : NULL;
> +}
> +
> +static ssize_t ufs_provision_show(struct config_item *item, char *buf)
> +{
> + u8 desc_buf[QUERY_DESC_CONFIGURATION_DEF_SIZE] = {0};
> + int buff_len = QUERY_DESC_CONFIGURATION_DEF_SIZE;
> + int i, ret, curr_len = 0;
> + struct ufs_hba *hba = config_item_to_hba(item);
> +
> + if (!hba)
> + return -EINVAL;
I don't think this is actually possible. Is a configfs show function
ever called with a null item?
> +
> + ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC,
> + QUERY_DESC_IDN_CONFIGURATION, 0, 0, desc_buf, &buff_len);
> +
> + if (ret)
> + return ret;
> +
> + for (i = 0; i < buff_len; i++)
> + curr_len += snprintf((buf + curr_len), (PAGE_SIZE - curr_len),
> + "0x%x ", desc_buf[i]);
> +
> + return curr_len;
> +}
> +
> +ssize_t ufshcd_desc_configfs_store(struct ufs_hba *hba,
> + const char *buf, size_t count)
> +{
> + char *strbuf;
> + char *strbuf_copy;
> + u8 desc_buf[QUERY_DESC_CONFIGURATION_DEF_SIZE] = {0};
> + int buff_len = QUERY_DESC_CONFIGURATION_DEF_SIZE;
> + char *token;
> + int i, ret, value;
> + u32 bConfigDescrLock = 0;
I haven't seen many examples of variables named this way. I know it
follows what the UFS spec does, but I haven't noticed examples of
people naming their locals outside of normal Linux conventions.
> +
> + /* reserve one byte for null termination */
> + strbuf = kmalloc(count + 1, GFP_KERNEL);
> + if (!strbuf)
> + return -ENOMEM;
> +
> + strbuf_copy = strbuf;
> + strlcpy(strbuf, buf, count + 1);
> +
> + if (!hba)
> + goto out;
Again, is this possible?
> +
> + /* Just return if bConfigDescrLock is already set */
> + ret = ufshcd_query_attr(hba, UPIU_QUERY_OPCODE_READ_ATTR,
> + QUERY_ATTR_IDN_CONF_DESC_LOCK, 0, 0, &bConfigDescrLock);
> + if (ret)
> + goto out;
> +
> + if (bConfigDescrLock) {
> + dev_err(hba->dev, "%s: bConfigDescrLock already set to %u, cannot re-provision device!\n",
> + __func__, bConfigDescrLock);
> + goto out;
You're succeeding here, shouldn't you fail the write? In fact, you
succeed the write in a whole bunch of failure cases. Please fail the
write in error cases.
> + }
> +
> + for (i = 0; i < QUERY_DESC_CONFIGURATION_DEF_SIZE; i++) {
> + token = strsep(&strbuf, " ");
> + if (!token && i)
> + break;
> +
> + ret = kstrtoint(token, 0, &value);
> + if (ret) {
> + dev_err(hba->dev, "%s: kstrtoint failed %d %s\n",
> + __func__, ret, token);
> + goto out;
> + }
> + desc_buf[i] = (u8)value;
> + }
> +
> + /* Write configuration descriptor to provision ufs */
> + ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_WRITE_DESC,
> + QUERY_DESC_IDN_CONFIGURATION, 0, 0, desc_buf, &buff_len);
> +
> + if (!ret)
> + dev_err(hba->dev, "%s: UFS Provisioning done, reboot now!\n",
> + __func__);
> +
> +out:
> + kfree(strbuf_copy);
> + return count;
> +}
> +
> +static ssize_t ufs_provision_store(struct config_item *item,
> + const char *buf, size_t count)
> +{
> + struct ufs_hba *hba = config_item_to_hba(item);
> +
> + return ufshcd_desc_configfs_store(hba, buf, count);
> +}
> +
> +static struct configfs_attribute ufshcd_attr_provision = {
> + .ca_name = "ufs_provision",
> + .ca_mode = 0644,
> + .ca_owner = THIS_MODULE,
> + .show = ufs_provision_show,
> + .store = ufs_provision_store,
> +};
> +
> +static struct configfs_attribute *ufshcd_attrs[] = {
> + &ufshcd_attr_provision,
> + NULL,
> +};
> +
> +static struct config_item_type ufscfg_type = {
> + .ct_attrs = ufshcd_attrs,
> + .ct_owner = THIS_MODULE,
> +};
> +
> +static struct configfs_subsystem ufscfg_subsys = {
> + .su_group = {
> + .cg_item = {
> + .ci_type = &ufscfg_type,
> + },
> + },
> +};
> +
> +int ufshcd_configfs_init(struct ufs_hba *hba, const char *name)
> +{
> + int ret;
> + struct configfs_subsystem *subsys = &hba->subsys;
> +
> + strncpy(ufscfg_subsys.su_group.cg_item.ci_namebuf, name, strlen(name));
> + subsys->su_group = ufscfg_subsys.su_group;
> + config_group_init(&subsys->su_group);
> + mutex_init(&subsys->su_mutex);
> + ret = configfs_register_subsystem(subsys);
> + if (ret)
> + pr_err("Error %d while registering subsystem %s\n",
> + ret,
> + subsys->su_group.cg_item.ci_namebuf);
> +
> + return ret;
> +}
> +
> +void ufshcd_configfs_exit(void)
> +{
> + configfs_unregister_subsystem(&ufscfg_subsys);
> +}
> diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
> index 0cbdde7..bc7bffc 100644
> --- a/drivers/scsi/ufs/ufshcd.c
> +++ b/drivers/scsi/ufs/ufshcd.c
> @@ -7711,6 +7711,9 @@ int ufshcd_shutdown(struct ufs_hba *hba)
> void ufshcd_remove(struct ufs_hba *hba)
> {
> ufs_sysfs_remove_nodes(hba->dev);
> +#ifdef CONFIG_UFS_PROVISION
> + ufshcd_configfs_exit();
> +#endif
> scsi_remove_host(hba->host);
> /* disable interrupts */
> ufshcd_disable_intr(hba, hba->intr_mask);
> @@ -7964,7 +7967,9 @@ int ufshcd_init(struct ufs_hba *hba, void __iomem *mmio_base, unsigned int irq)
>
> async_schedule(ufshcd_async_scan, hba);
> ufs_sysfs_add_nodes(hba->dev);
> -
> +#ifdef CONFIG_UFS_PROVISION
> + ufshcd_configfs_init(hba, dev_name(hba->dev));
> +#endif
Normally the way I see this done is to define stub functions up in the
header when !CONFIG_UFS_PROVISION, rather than ifdefs in the code. Can
you do it that way?
> return 0;
>
> out_remove_scsi_host:
> diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
> index 101a75c..7b6cc88 100644
> --- a/drivers/scsi/ufs/ufshcd.h
> +++ b/drivers/scsi/ufs/ufshcd.h
> @@ -37,6 +37,7 @@
> #ifndef _UFSHCD_H
> #define _UFSHCD_H
>
> +#include <linux/configfs.h>
> #include <linux/module.h>
> #include <linux/kernel.h>
> #include <linux/init.h>
> @@ -515,6 +516,9 @@ struct ufs_hba {
>
> struct Scsi_Host *host;
> struct device *dev;
> +#ifdef CONFIG_UFS_PROVISION
> + struct configfs_subsystem subsys;
> +#endif
> /*
> * This field is to keep a reference to "scsi_device" corresponding to
> * "UFS device" W-LU.
> @@ -868,6 +872,12 @@ int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index,
> int ufshcd_hold(struct ufs_hba *hba, bool async);
> void ufshcd_release(struct ufs_hba *hba);
>
> +/* Expose UFS configfs API's */
> +#ifdef CONFIG_UFS_PROVISION
> +extern int ufshcd_configfs_init(struct ufs_hba *hba, const char *name);
> +extern void ufshcd_configfs_exit(void);
> +#endif
> +
> int ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id,
> int *desc_length);
>
> --
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>
