[PATCH v2 2/4] drivers/scsi/dpt_i2o: Use dma_zalloc_coherent to repalce dma_alloc_coherent+memset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We prefer to dma_zalloc_coherent rather than open code 
dma_alloc_coherent() + memset(), So just replace them.

Signed-off-by: zhong jiang <zhongjiang@xxxxxxxxxx>
---
 drivers/scsi/dpt_i2o.c | 12 ++++--------
 1 file changed, 4 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
index 37de8fb..056383a 100644
--- a/drivers/scsi/dpt_i2o.c
+++ b/drivers/scsi/dpt_i2o.c
@@ -1370,13 +1370,12 @@ static s32 adpt_i2o_reset_hba(adpt_hba* pHba)
 		schedule_timeout_uninterruptible(1);
 	} while (m == EMPTY_QUEUE);
 
-	status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
+	status = dma_zalloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
 	if(status == NULL) {
 		adpt_send_nop(pHba, m);
 		printk(KERN_ERR"IOP reset failed - no free memory.\n");
 		return -ENOMEM;
 	}
-	memset(status,0,4);
 
 	msg[0]=EIGHT_WORD_MSG_SIZE|SGL_OFFSET_0;
 	msg[1]=I2O_CMD_ADAPTER_RESET<<24|HOST_TID<<12|ADAPTER_TID;
@@ -2836,14 +2835,13 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 
 	msg=(u32 __iomem *)(pHba->msg_addr_virt+m);
 
-	status = dma_alloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
+	status = dma_zalloc_coherent(&pHba->pDev->dev, 4, &addr, GFP_KERNEL);
 	if (!status) {
 		adpt_send_nop(pHba, m);
 		printk(KERN_WARNING"%s: IOP reset failed - no free memory.\n",
 			pHba->name);
 		return -ENOMEM;
 	}
-	memset(status, 0, 4);
 
 	writel(EIGHT_WORD_MSG_SIZE| SGL_OFFSET_6, &msg[0]);
 	writel(I2O_CMD_OUTBOUND_INIT<<24 | HOST_TID<<12 | ADAPTER_TID, &msg[1]);
@@ -2890,14 +2888,13 @@ static s32 adpt_i2o_init_outbound_q(adpt_hba* pHba)
 			pHba->reply_pool, pHba->reply_pool_pa);
 	}
 
-	pHba->reply_pool = dma_alloc_coherent(&pHba->pDev->dev,
+	pHba->reply_pool = dma_zalloc_coherent(&pHba->pDev->dev,
 				pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4,
 				&pHba->reply_pool_pa, GFP_KERNEL);
 	if (!pHba->reply_pool) {
 		printk(KERN_ERR "%s: Could not allocate reply pool\n", pHba->name);
 		return -ENOMEM;
 	}
-	memset(pHba->reply_pool, 0 , pHba->reply_fifo_size * REPLY_FRAME_SIZE * 4);
 
 	for(i = 0; i < pHba->reply_fifo_size; i++) {
 		writel(pHba->reply_pool_pa + (i * REPLY_FRAME_SIZE * 4),
@@ -3126,13 +3123,12 @@ static int adpt_i2o_build_sys_table(void)
 	sys_tbl_len = sizeof(struct i2o_sys_tbl) +	// Header + IOPs
 				(hba_count) * sizeof(struct i2o_sys_tbl_entry);
 
-	sys_tbl = dma_alloc_coherent(&pHba->pDev->dev,
+	sys_tbl = dma_zalloc_coherent(&pHba->pDev->dev,
 				sys_tbl_len, &sys_tbl_pa, GFP_KERNEL);
 	if (!sys_tbl) {
 		printk(KERN_WARNING "SysTab Set failed. Out of memory.\n");	
 		return -ENOMEM;
 	}
-	memset(sys_tbl, 0, sys_tbl_len);
 
 	sys_tbl->num_entries = hba_count;
 	sys_tbl->version = I2OVERSION;
-- 
1.7.12.4




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux