Nine fixes, five in the qla2xxx driver, the most serious of which is
the uninitialized list head crash which can be observed in most systems
under a sufficiently loaded low memory environment. The two sg fixes
are minor but obvious and two target ones which seem reasonable but not
high impact.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-fixes
The short changelog is:
Anil Gurumurthy (1):
scsi: qla2xxx: Return error when TMF returns
Quinn Tran (4):
scsi: qla2xxx: Fix ISP recovery on unload
scsi: qla2xxx: Fix driver unload by shutting down chip
scsi: qla2xxx: Fix NPIV deletion by calling wait_for_sess_deletion
scsi: qla2xxx: Fix unintialized List head crash
Tony Battersby (2):
scsi: sg: update comment for blk_get_request()
scsi: sg: fix minor memory leak in error path
Varun Prakash (2):
scsi: libiscsi: fix possible NULL pointer dereference in case of TMF
scsi: target: iscsi: cxgbit: fix max iso npdu calculation
And the diffstat:
drivers/scsi/libiscsi.c | 12 +++----
drivers/scsi/qla2xxx/qla_attr.c | 1 +
drivers/scsi/qla2xxx/qla_gbl.h | 1 +
drivers/scsi/qla2xxx/qla_gs.c | 4 +++
drivers/scsi/qla2xxx/qla_init.c | 7 ++--
drivers/scsi/qla2xxx/qla_inline.h | 2 ++
drivers/scsi/qla2xxx/qla_isr.c | 3 ++
drivers/scsi/qla2xxx/qla_mbx.c | 6 ++++
drivers/scsi/qla2xxx/qla_mid.c | 11 +++++--
drivers/scsi/qla2xxx/qla_os.c | 51 +++++++++++++----------------
drivers/scsi/qla2xxx/qla_sup.c | 3 ++
drivers/scsi/sg.c | 15 ++++-----
drivers/target/iscsi/cxgbit/cxgbit_target.c | 16 +++++----
13 files changed, 75 insertions(+), 57 deletions(-)
With full diff below.
James
---
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index d6093838f5f2..c972cc2b3d5b 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -284,11 +284,11 @@ static int iscsi_check_tmf_restrictions(struct iscsi_task *task, int opcode)
*/
if (opcode != ISCSI_OP_SCSI_DATA_OUT) {
iscsi_conn_printk(KERN_INFO, conn,
- "task [op %x/%x itt "
+ "task [op %x itt "
"0x%x/0x%x] "
"rejected.\n",
- task->hdr->opcode, opcode,
- task->itt, task->hdr_itt);
+ opcode, task->itt,
+ task->hdr_itt);
return -EACCES;
}
/*
@@ -297,10 +297,10 @@ static int iscsi_check_tmf_restrictions(struct iscsi_task *task, int opcode)
*/
if (conn->session->fast_abort) {
iscsi_conn_printk(KERN_INFO, conn,
- "task [op %x/%x itt "
+ "task [op %x itt "
"0x%x/0x%x] fast abort.\n",
- task->hdr->opcode, opcode,
- task->itt, task->hdr_itt);
+ opcode, task->itt,
+ task->hdr_itt);
return -EACCES;
}
break;
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
index 89a4999fa631..c8731568f9c4 100644
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -2141,6 +2141,7 @@ qla24xx_vport_delete(struct fc_vport *fc_vport)
msleep(1000);
qla24xx_disable_vp(vha);
+ qla2x00_wait_for_sess_deletion(vha);
vha->flags.delete_progress = 1;
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index f68eb6096559..2660a48d918a 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -214,6 +214,7 @@ void qla2x00_handle_login_done_event(struct scsi_qla_host *, fc_port_t *,
int qla24xx_post_gnl_work(struct scsi_qla_host *, fc_port_t *);
int qla24xx_async_abort_cmd(srb_t *);
int qla24xx_post_relogin_work(struct scsi_qla_host *vha);
+void qla2x00_wait_for_sess_deletion(scsi_qla_host_t *);
/*
* Global Functions in qla_mid.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 2c35b0b2baa0..7a3744006419 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -3708,6 +3708,10 @@ int qla24xx_async_gpnid(scsi_qla_host_t *vha, port_id_t *id)
return rval;
done_free_sp:
+ spin_lock_irqsave(&vha->hw->vport_slock, flags);
+ list_del(&sp->elem);
+ spin_unlock_irqrestore(&vha->hw->vport_slock, flags);
+
if (sp->u.iocb_cmd.u.ctarg.req) {
dma_free_coherent(&vha->hw->pdev->dev,
sizeof(struct ct_sns_pkt),
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index db0e3279e07a..1b19b954bbae 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1489,11 +1489,10 @@ qla2x00_async_tm_cmd(fc_port_t *fcport, uint32_t flags, uint32_t lun,
wait_for_completion(&tm_iocb->u.tmf.comp);
- rval = tm_iocb->u.tmf.comp_status == CS_COMPLETE ?
- QLA_SUCCESS : QLA_FUNCTION_FAILED;
+ rval = tm_iocb->u.tmf.data;
- if ((rval != QLA_SUCCESS) || tm_iocb->u.tmf.data) {
- ql_dbg(ql_dbg_taskm, vha, 0x8030,
+ if (rval != QLA_SUCCESS) {
+ ql_log(ql_log_warn, vha, 0x8030,
"TM IOCB failed (%x).\n", rval);
}
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
index 37ae0f6d8ae5..59fd5a9dfeb8 100644
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -222,6 +222,8 @@ qla2xxx_get_qpair_sp(struct qla_qpair *qpair, fc_port_t *fcport, gfp_t flag)
sp->fcport = fcport;
sp->iocbs = 1;
sp->vha = qpair->vha;
+ INIT_LIST_HEAD(&sp->elem);
+
done:
if (!sp)
QLA_QPAIR_MARK_NOT_BUSY(qpair);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 9fa5a2557f2c..7756106d4555 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -631,6 +631,9 @@ qla2x00_async_event(scsi_qla_host_t *vha, struct rsp_que *rsp, uint16_t *mb)
unsigned long flags;
fc_port_t *fcport = NULL;
+ if (!vha->hw->flags.fw_started)
+ return;
+
/* Setup to process RIO completion. */
handle_cnt = 0;
if (IS_CNA_CAPABLE(ha))
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7e875f575229..f0ec13d48bf3 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -4220,6 +4220,9 @@ qla25xx_init_req_que(struct scsi_qla_host *vha, struct req_que *req)
mbx_cmd_t *mcp = &mc;
struct qla_hw_data *ha = vha->hw;
+ if (!ha->flags.fw_started)
+ return QLA_SUCCESS;
+
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10d3,
"Entered %s.\n", __func__);
@@ -4289,6 +4292,9 @@ qla25xx_init_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
mbx_cmd_t *mcp = &mc;
struct qla_hw_data *ha = vha->hw;
+ if (!ha->flags.fw_started)
+ return QLA_SUCCESS;
+
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x10d6,
"Entered %s.\n", __func__);
diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
index f6f0a759a7c2..aa727d07b702 100644
--- a/drivers/scsi/qla2xxx/qla_mid.c
+++ b/drivers/scsi/qla2xxx/qla_mid.c
@@ -152,11 +152,18 @@ int
qla24xx_disable_vp(scsi_qla_host_t *vha)
{
unsigned long flags;
- int ret;
+ int ret = QLA_SUCCESS;
+ fc_port_t *fcport;
+
+ if (vha->hw->flags.fw_started)
+ ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
- ret = qla24xx_control_vp(vha, VCE_COMMAND_DISABLE_VPS_LOGO_ALL);
atomic_set(&vha->loop_state, LOOP_DOWN);
atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
+ list_for_each_entry(fcport, &vha->vp_fcports, list)
+ fcport->logout_on_delete = 0;
+
+ qla2x00_mark_all_devices_lost(vha, 0);
/* Remove port id from vp target map */
spin_lock_irqsave(&vha->hw->hardware_lock, flags);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 9f309e572be4..1fbd16c8c9a7 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -303,6 +303,7 @@ static void qla2x00_free_device(scsi_qla_host_t *);
static int qla2xxx_map_queues(struct Scsi_Host *shost);
static void qla2x00_destroy_deferred_work(struct qla_hw_data *);
+
struct scsi_host_template qla2xxx_driver_template = {
.module = THIS_MODULE,
.name = QLA2XXX_DRIVER_NAME,
@@ -1147,7 +1148,7 @@ static inline int test_fcport_count(scsi_qla_host_t *vha)
* qla2x00_wait_for_sess_deletion can only be called from remove_one.
* it has dependency on UNLOADING flag to stop device discovery
*/
-static void
+void
qla2x00_wait_for_sess_deletion(scsi_qla_host_t *vha)
{
qla2x00_mark_all_devices_lost(vha, 0);
@@ -3603,6 +3604,8 @@ qla2x00_remove_one(struct pci_dev *pdev)
base_vha = pci_get_drvdata(pdev);
ha = base_vha->hw;
+ ql_log(ql_log_info, base_vha, 0xb079,
+ "Removing driver\n");
/* Indicate device removal to prevent future board_disable and wait
* until any pending board_disable has completed. */
@@ -3625,6 +3628,21 @@ qla2x00_remove_one(struct pci_dev *pdev)
}
qla2x00_wait_for_hba_ready(base_vha);
+ if (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha)) {
+ if (ha->flags.fw_started)
+ qla2x00_abort_isp_cleanup(base_vha);
+ } else if (!IS_QLAFX00(ha)) {
+ if (IS_QLA8031(ha)) {
+ ql_dbg(ql_dbg_p3p, base_vha, 0xb07e,
+ "Clearing fcoe driver presence.\n");
+ if (qla83xx_clear_drv_presence(base_vha) != QLA_SUCCESS)
+ ql_dbg(ql_dbg_p3p, base_vha, 0xb079,
+ "Error while clearing DRV-Presence.\n");
+ }
+
+ qla2x00_try_to_stop_firmware(base_vha);
+ }
+
qla2x00_wait_for_sess_deletion(base_vha);
/*
@@ -3648,14 +3666,6 @@ qla2x00_remove_one(struct pci_dev *pdev)
qla2x00_delete_all_vps(ha, base_vha);
- if (IS_QLA8031(ha)) {
- ql_dbg(ql_dbg_p3p, base_vha, 0xb07e,
- "Clearing fcoe driver presence.\n");
- if (qla83xx_clear_drv_presence(base_vha) != QLA_SUCCESS)
- ql_dbg(ql_dbg_p3p, base_vha, 0xb079,
- "Error while clearing DRV-Presence.\n");
- }
-
qla2x00_abort_all_cmds(base_vha, DID_NO_CONNECT << 16);
qla2x00_dfs_remove(base_vha);
@@ -3715,24 +3725,6 @@ qla2x00_free_device(scsi_qla_host_t *vha)
qla2x00_stop_timer(vha);
qla25xx_delete_queues(vha);
-
- if (ha->flags.fce_enabled)
- qla2x00_disable_fce_trace(vha, NULL, NULL);
-
- if (ha->eft)
- qla2x00_disable_eft_trace(vha);
-
- if (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha)) {
- if (ha->flags.fw_started)
- qla2x00_abort_isp_cleanup(vha);
- } else {
- if (ha->flags.fw_started) {
- /* Stop currently executing firmware. */
- qla2x00_try_to_stop_firmware(vha);
- ha->flags.fw_started = 0;
- }
- }
-
vha->flags.online = 0;
/* turn-off interrupts on the card */
@@ -6028,8 +6020,9 @@ qla2x00_do_dpc(void *data)
set_bit(ISP_ABORT_NEEDED, &base_vha->dpc_flags);
}
- if (test_and_clear_bit(ISP_ABORT_NEEDED,
- &base_vha->dpc_flags)) {
+ if (test_and_clear_bit
+ (ISP_ABORT_NEEDED, &base_vha->dpc_flags) &&
+ !test_bit(UNLOADING, &base_vha->dpc_flags)) {
ql_dbg(ql_dbg_dpc, base_vha, 0x4007,
"ISP abort scheduled.\n");
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 04458eb19d38..4499c787165f 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -1880,6 +1880,9 @@ qla24xx_beacon_off(struct scsi_qla_host *vha)
if (IS_P3P_TYPE(ha))
return QLA_SUCCESS;
+ if (!ha->flags.fw_started)
+ return QLA_SUCCESS;
+
ha->beacon_blink_led = 0;
if (IS_QLA2031(ha) || IS_QLA27XX(ha))
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index cd2fdac000c9..ba9ba0e04f42 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -1741,15 +1741,11 @@ sg_start_req(Sg_request *srp, unsigned char *cmd)
*
* With scsi-mq enabled, there are a fixed number of preallocated
* requests equal in number to shost->can_queue. If all of the
- * preallocated requests are already in use, then using GFP_ATOMIC with
- * blk_get_request() will return -EWOULDBLOCK, whereas using GFP_KERNEL
- * will cause blk_get_request() to sleep until an active command
- * completes, freeing up a request. Neither option is ideal, but
- * GFP_KERNEL is the better choice to prevent userspace from getting an
- * unexpected EWOULDBLOCK.
- *
- * With scsi-mq disabled, blk_get_request() with GFP_KERNEL usually
- * does not sleep except under memory pressure.
+ * preallocated requests are already in use, then blk_get_request()
+ * will sleep until an active command completes, freeing up a request.
+ * Although waiting in an asynchronous interface is less than ideal, we
+ * do not want to use BLK_MQ_REQ_NOWAIT here because userspace might
+ * not expect an EWOULDBLOCK from this condition.
*/
rq = blk_get_request(q, hp->dxfer_direction == SG_DXFER_TO_DEV ?
REQ_OP_SCSI_OUT : REQ_OP_SCSI_IN, 0);
@@ -2185,6 +2181,7 @@ sg_add_sfp(Sg_device * sdp)
write_lock_irqsave(&sdp->sfd_lock, iflags);
if (atomic_read(&sdp->detaching)) {
write_unlock_irqrestore(&sdp->sfd_lock, iflags);
+ kfree(sfp);
return ERR_PTR(-ENODEV);
}
list_add_tail(&sfp->sfd_siblings, &sdp->sfds);
diff --git a/drivers/target/iscsi/cxgbit/cxgbit_target.c b/drivers/target/iscsi/cxgbit/cxgbit_target.c
index 514986b57c2d..25eb3891e34b 100644
--- a/drivers/target/iscsi/cxgbit/cxgbit_target.c
+++ b/drivers/target/iscsi/cxgbit/cxgbit_target.c
@@ -652,6 +652,7 @@ static int cxgbit_set_iso_npdu(struct cxgbit_sock *csk)
struct iscsi_param *param;
u32 mrdsl, mbl;
u32 max_npdu, max_iso_npdu;
+ u32 max_iso_payload;
if (conn->login->leading_connection) {
param = iscsi_find_param_from_key(MAXBURSTLENGTH,
@@ -670,8 +671,10 @@ static int cxgbit_set_iso_npdu(struct cxgbit_sock *csk)
mrdsl = conn_ops->MaxRecvDataSegmentLength;
max_npdu = mbl / mrdsl;
- max_iso_npdu = CXGBIT_MAX_ISO_PAYLOAD /
- (ISCSI_HDR_LEN + mrdsl +
+ max_iso_payload = rounddown(CXGBIT_MAX_ISO_PAYLOAD, csk->emss);
+
+ max_iso_npdu = max_iso_payload /
+ (ISCSI_HDR_LEN + mrdsl +
cxgbit_digest_len[csk->submode]);
csk->max_iso_npdu = min(max_npdu, max_iso_npdu);
@@ -741,6 +744,9 @@ static int cxgbit_set_params(struct iscsi_conn *conn)
if (conn_ops->MaxRecvDataSegmentLength > cdev->mdsl)
conn_ops->MaxRecvDataSegmentLength = cdev->mdsl;
+ if (cxgbit_set_digest(csk))
+ return -1;
+
if (conn->login->leading_connection) {
param = iscsi_find_param_from_key(ERRORRECOVERYLEVEL,
conn->param_list);
@@ -764,7 +770,7 @@ static int cxgbit_set_params(struct iscsi_conn *conn)
if (is_t5(cdev->lldi.adapter_type))
goto enable_ddp;
else
- goto enable_digest;
+ return 0;
}
if (test_bit(CDEV_ISO_ENABLE, &cdev->flags)) {
@@ -781,10 +787,6 @@ static int cxgbit_set_params(struct iscsi_conn *conn)
}
}
-enable_digest:
- if (cxgbit_set_digest(csk))
- return -1;
-
return 0;
}
