[PATCH 10/16] qla2xxx: Flush mailbox commands on chip reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <quinn.tran@xxxxxxxxxx>

Flush pending mailbox commands on chip reset.  Wake up
command that's waiting for an interrupt and wait for
mailbox counters to go to zero.

Signed-off-by: Quinn Tran <quinn.tran@xxxxxxxxxx>
Signed-off-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_def.h  |  5 +++++
 drivers/scsi/qla2xxx/qla_init.c | 21 ++++++++++++++++-
 drivers/scsi/qla2xxx/qla_mbx.c  | 50 +++++++++++++++++++++++++++++++++++++----
 drivers/scsi/qla2xxx/qla_os.c   |  3 +++
 4 files changed, 74 insertions(+), 5 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index b595479d445b..ddcaa0786f37 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3600,6 +3600,7 @@ struct qla_hw_data {
 		uint32_t	detected_lr_sfp:1;
 		uint32_t	using_lr_setting:1;
 		uint32_t	rida_fmt2:1;
+		uint32_t	purge_mbox:1;
 	} flags;
 
 	uint16_t max_exchg;
@@ -3845,6 +3846,9 @@ struct qla_hw_data {
 	int		port_down_retry_count;
 	uint8_t		mbx_count;
 	uint8_t		aen_mbx_count;
+	atomic_t	num_pend_mbx_stage1;
+	atomic_t	num_pend_mbx_stage2;
+	atomic_t	num_pend_mbx_stage3;
 
 	uint32_t	login_retry_count;
 	/* SNS command interfaces. */
@@ -4158,6 +4162,7 @@ struct qla_hw_data {
 	struct work_struct board_disable;
 
 	struct mr_data_fx00 mr;
+	uint32_t chip_reset;
 
 	struct qlt_hw_data tgt;
 	int	allow_cna_fw_dump;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index dff4dc588947..ff79bed54e07 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -6280,6 +6280,7 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	ql_log(ql_log_info, vha, 0x00af,
 	    "Performing ISP error recovery - ha=%p.\n", ha);
 
+	ha->flags.purge_mbox = 1;
 	/* For ISP82XX, reset_chip is just disabling interrupts.
 	 * Driver waits for the completion of the commands.
 	 * the interrupts need to be enabled.
@@ -6294,13 +6295,31 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	ha->current_topology = 0;
 	ha->flags.fw_started = 0;
 	ha->flags.fw_init_done = 0;
-	ha->base_qpair->chip_reset++;
+	ha->chip_reset++;
+	ha->base_qpair->chip_reset = ha->chip_reset;
 	for (i = 0; i < ha->max_qpairs; i++) {
 		if (ha->queue_pair_map[i])
 			ha->queue_pair_map[i]->chip_reset =
 				ha->base_qpair->chip_reset;
 	}
 
+	/* purge MBox commands */
+	if (atomic_read(&ha->num_pend_mbx_stage3)) {
+		clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
+		complete(&ha->mbx_intr_comp);
+	}
+
+	i = 0;
+	while (atomic_read(&ha->num_pend_mbx_stage3) ||
+	    atomic_read(&ha->num_pend_mbx_stage2) ||
+	    atomic_read(&ha->num_pend_mbx_stage1)) {
+		msleep(20);
+		i++;
+		if (i > 50)
+			break;
+	}
+	ha->flags.purge_mbox = 0;
+
 	atomic_set(&vha->loop_down_timer, LOOP_DOWN_TIME);
 	if (atomic_read(&vha->loop_state) != LOOP_DOWN) {
 		atomic_set(&vha->loop_state, LOOP_DOWN);
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 4b576aabba30..70517cd09e32 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -110,6 +110,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	unsigned long	wait_time;
 	struct qla_hw_data *ha = vha->hw;
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
+	u32 chip_reset;
 
 
 	ql_dbg(ql_dbg_mbx, vha, 0x1000, "Entered %s.\n", __func__);
@@ -140,7 +141,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 	rval = QLA_SUCCESS;
 	abort_active = test_bit(ABORT_ISP_ACTIVE, &base_vha->dpc_flags);
-
+	chip_reset = ha->chip_reset;
 
 	if (ha->flags.pci_channel_io_perm_failure) {
 		ql_log(ql_log_warn, vha, 0x1003,
@@ -167,6 +168,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		return QLA_FUNCTION_TIMEOUT;
 	}
 
+	atomic_inc(&ha->num_pend_mbx_stage1);
 	/*
 	 * Wait for active mailbox commands to finish by waiting at most tov
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
@@ -177,8 +179,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		ql_log(ql_log_warn, vha, 0xd035,
 		    "Cmd access timeout, cmd=0x%x, Exiting.\n",
 		    mcp->mb[0]);
+		atomic_dec(&ha->num_pend_mbx_stage1);
 		return QLA_FUNCTION_TIMEOUT;
 	}
+	atomic_dec(&ha->num_pend_mbx_stage1);
+	if (ha->flags.purge_mbox || chip_reset != ha->chip_reset) {
+		rval = QLA_ABORTED;
+		goto premature_exit;
+	}
 
 	ha->flags.mbox_busy = 1;
 	/* Save mailbox command for debug */
@@ -189,6 +197,13 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 	spin_lock_irqsave(&ha->hardware_lock, flags);
 
+	if (ha->flags.purge_mbox || chip_reset != ha->chip_reset) {
+		rval = QLA_ABORTED;
+		ha->flags.mbox_busy = 0;
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+		goto premature_exit;
+	}
+
 	/* Load mailbox registers. */
 	if (IS_P3P_TYPE(ha))
 		optr = (uint16_t __iomem *)&reg->isp82.mailbox_in[0];
@@ -231,7 +246,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	    "jiffies=%lx.\n", jiffies);
 
 	/* Wait for mbx cmd completion until timeout */
-
+	atomic_inc(&ha->num_pend_mbx_stage2);
 	if ((!abort_active && io_lock_on) || IS_NOPOLLING_TYPE(ha)) {
 		set_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 
@@ -241,6 +256,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				spin_unlock_irqrestore(&ha->hardware_lock,
 					flags);
 				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
 				ql_dbg(ql_dbg_mbx, vha, 0x1010,
 				    "Pending mailbox timeout, exiting.\n");
 				rval = QLA_FUNCTION_TIMEOUT;
@@ -254,6 +270,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		spin_unlock_irqrestore(&ha->hardware_lock, flags);
 
 		wait_time = jiffies;
+		atomic_inc(&ha->num_pend_mbx_stage3);
 		if (!wait_for_completion_timeout(&ha->mbx_intr_comp,
 		    mcp->tov * HZ)) {
 			ql_dbg(ql_dbg_mbx, vha, 0x117a,
@@ -261,7 +278,17 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 			spin_lock_irqsave(&ha->hardware_lock, flags);
 			clear_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags);
 			spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+		} else if (ha->flags.purge_mbox ||
+		    chip_reset != ha->chip_reset) {
+			ha->flags.mbox_busy = 0;
+			atomic_dec(&ha->num_pend_mbx_stage2);
+			atomic_dec(&ha->num_pend_mbx_stage3);
+			rval = QLA_ABORTED;
+			goto premature_exit;
 		}
+		atomic_dec(&ha->num_pend_mbx_stage3);
+
 		if (time_after(jiffies, wait_time + 5 * HZ))
 			ql_log(ql_log_warn, vha, 0x1015, "cmd=0x%x, waited %d msecs\n",
 			    command, jiffies_to_msecs(jiffies - wait_time));
@@ -275,6 +302,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 				spin_unlock_irqrestore(&ha->hardware_lock,
 					flags);
 				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
 				ql_dbg(ql_dbg_mbx, vha, 0x1012,
 				    "Pending mailbox timeout, exiting.\n");
 				rval = QLA_FUNCTION_TIMEOUT;
@@ -289,6 +317,14 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 
 		wait_time = jiffies + mcp->tov * HZ; /* wait at most tov secs */
 		while (!ha->flags.mbox_int) {
+			if (ha->flags.purge_mbox ||
+			    chip_reset != ha->chip_reset) {
+				ha->flags.mbox_busy = 0;
+				atomic_dec(&ha->num_pend_mbx_stage2);
+				rval = QLA_ABORTED;
+				goto premature_exit;
+			}
+
 			if (time_after(jiffies, wait_time))
 				break;
 
@@ -312,6 +348,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		    "Waited %d sec.\n",
 		    (uint)((jiffies - (wait_time - (mcp->tov * HZ)))/HZ));
 	}
+	atomic_dec(&ha->num_pend_mbx_stage2);
 
 	/* Check whether we timed out */
 	if (ha->flags.mbox_int) {
@@ -390,7 +427,8 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		/* Capture FW dump only, if PCI device active */
 		if (!pci_channel_offline(vha->hw->pdev)) {
 			pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w);
-			if (w == 0xffff || ictrl == 0xffffffff) {
+			if (w == 0xffff || ictrl == 0xffffffff ||
+			    (chip_reset != ha->chip_reset)) {
 				/* This is special case if there is unload
 				 * of driver happening and if PCI device go
 				 * into bad state due to PCI error condition
@@ -497,7 +535,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 	complete(&ha->mbx_cmd_comp);
 
 mbx_done:
-	if (rval) {
+	if (rval == QLA_ABORTED) {
+		ql_log(ql_log_info, vha, 0xd035,
+		    "Chip Reset in progress. Purging Mbox cmd=0x%x.\n",
+		    mcp->mb[0]);
+	} else if (rval) {
 		if (ql2xextended_error_logging & (ql_dbg_disc|ql_dbg_mbx)) {
 			pr_warn("%s [%s]-%04x:%ld: **** Failed", QL_MSGHDR,
 			    dev_name(&ha->pdev->dev), 0x1020+0x800,
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 79514d43cb32..106150f1a86e 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -2816,6 +2816,9 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	ha->link_data_rate = PORT_SPEED_UNKNOWN;
 	ha->optrom_size = OPTROM_SIZE_2300;
 	ha->max_exchg = FW_MAX_EXCHANGES_CNT;
+	atomic_set(&ha->num_pend_mbx_stage1, 0);
+	atomic_set(&ha->num_pend_mbx_stage2, 0);
+	atomic_set(&ha->num_pend_mbx_stage3, 0);
 
 	/* Assign ISP specific operations. */
 	if (IS_QLA2100(ha)) {
-- 
2.12.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux