On Fri, 2006-09-22 at 09:05 +0300, Muli Ben-Yehuda wrote: > Thanks Andrew, we're looking into it. Just to add to the complexity, this seems to be working for me on a maia system with aic94xx boot drives James ----- PCI-DMA: Calgary IOMMU detected. TCE table spec is 6. [...] PCI-DMA: Using Calgary IOMMU Calgary: enabling translation on PHB 0 Calgary: errant DMAs will now be prevented on this bus. Calgary: enabling translation on PHB 1 Calgary: errant DMAs will now be prevented on this bus. [...] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded GSI 16 sharing vector 0xA9 and IRQ 16 ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 25 (level, low) -> IRQ 16 aic94xx: found Adaptec AIC-9410W SAS/SATA Host Adapter, device 0000:01:02.0 scsi0 : aic94xx aic94xx: BIOS present (1,1), 1548 aic94xx: ue num:1, ue size:88 aic94xx: 1Found FLASH(8) manuf:1, dev_id:0xda, sec_prot:0 aic94xx: manuf sect SAS_ADDR 5005076a0115a840 aic94xx: manuf sect PCBA SN aic94xx: ms: num_phy_desc: 8 aic94xx: ms: phy0: ENEBLEABLE aic94xx: ms: phy1: ENEBLEABLE aic94xx: ms: phy2: ENEBLEABLE aic94xx: ms: phy3: ENEBLEABLE aic94xx: ms: phy4: ENEBLEABLE aic94xx: ms: phy5: ENEBLEABLE aic94xx: ms: phy6: ENEBLEABLE aic94xx: ms: phy7: ENEBLEABLE aic94xx: ms: max_phys:0x8, num_phys:0x8 aic94xx: ms: enabled_phys:0xff aic94xx: ctrla: phy0: sas_addr: 5005076a0115a840, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy1: sas_addr: 5005076a0115a840, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy2: sas_addr: 5005076a0115a840, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy3: sas_addr: 5005076a0115a840, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy4: sas_addr: 5005076a0115a840, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy5: sas_addr: 5005076a0115a840, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy6: sas_addr: 5005076a0115a840, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: ctrla: phy7: sas_addr: 5005076a0115a840, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 aic94xx: max_scbs:512, max_ddbs:128 aic94xx: setting phy0 addr to 5005076a0115a840 aic94xx: setting phy1 addr to 5005076a0115a840 aic94xx: setting phy2 addr to 5005076a0115a840 aic94xx: setting phy3 addr to 5005076a0115a840 aic94xx: setting phy4 addr to 5005076a0115a840 aic94xx: setting phy5 addr to 5005076a0115a840 aic94xx: setting phy6 addr to 5005076a0115a840 aic94xx: setting phy7 addr to 5005076a0115a840 aic94xx: num_edbs:21 aic94xx: num_escbs:3 aic94xx: using sequencer V17/10c6 aic94xx: downloading CSEQ... aic94xx: dma-ing 8192 bytes aic94xx: verified 8192 bytes, passed aic94xx: downloading LSEQs... aic94xx: dma-ing 14336 bytes aic94xx: LSEQ0 verified 14336 bytes, passed aic94xx: LSEQ1 verified 14336 bytes, passed aic94xx: LSEQ2 verified 14336 bytes, passed aic94xx: LSEQ3 verified 14336 bytes, passed aic94xx: LSEQ4 verified 14336 bytes, passed aic94xx: LSEQ5 verified 14336 bytes, passed aic94xx: LSEQ6 verified 14336 bytes, passed aic94xx: LSEQ7 verified 14336 bytes, passed aic94xx: max_scbs:446 aic94xx: first_scb_site_no:0x20 aic94xx: last_scb_site_no:0x1fe aic94xx: First SCB dma_handle: 0x9000 aic94xx: device 0000:01:02.0: SAS addr 5005076a0115a840, PCBA SN , 8 phys, 8 enabled phys, flash present, BIOS build 1548 aic94xx: posting 3 escbs aic94xx: escbs posted aic94xx: posting 8 control phy scbs aic94xx: enabled phys aic94xx: control_phy_tasklet_complete: phy4, lrate:0x9, proto:0xe aic94xx: escb_tasklet_complete: phy4: BYTES_DMAED aic94xx: SAS proto IDENTIFY: aic94xx: 00: 20 00 02 02 aic94xx: 04: 00 00 00 00 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 50 05 07 6a aic94xx: 10: 00 00 2c 50 aic94xx: 14: 03 00 00 00 aic94xx: 18: 00 00 00 00 aic94xx: control_phy_tasklet_complete: phy0, lrate:0x9, proto:0xe aic94xx: escb_tasklet_complete: phy0: BYTES_DMAED aic94xx: SAS proto IDENTIFY: aic94xx: 00: 20 00 02 02 aic94xx: 04: 00 00 00 00 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 50 05 07 6a aic94xx: 10: 00 00 06 20 aic94xx: 14: 03 00 00 00 aic94xx: 18: 00 00 00 00 aic94xx: control_phy_tasklet_complete: phy1, lrate:0x9, proto:0xe aic94xx: escb_tasklet_complete: phy1: BYTES_DMAED aic94xx: SAS proto IDENTIFY: aic94xx: 00: 20 00 02 02 aic94xx: 04: 00 00 00 00 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 50 05 07 6a aic94xx: 10: 00 00 06 20 aic94xx: 14: 04 00 00 00 aic94xx: 18: 00 00 00 00 aic94xx: control_phy_tasklet_complete: phy6, lrate:0x9, proto:0xe aic94xx: escb_tasklet_complete: phy6: BYTES_DMAED aic94xx: SAS proto IDENTIFY: aic94xx: 00: 20 00 02 02 aic94xx: 04: 00 00 00 00 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 50 05 07 6a aic94xx: 10: 00 00 2c 50 aic94xx: 14: 07 00 00 00 aic94xx: 18: 00 00 00 00 aic94xx: control_phy_tasklet_complete: phy2, lrate:0x9, proto:0xe aic94xx: escb_tasklet_complete: phy2: BYTES_DMAED aic94xx: SAS proto IDENTIFY: aic94xx: 00: 20 00 02 02 aic94xx: 04: 00 00 00 00 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 50 05 07 6a aic94xx: 10: 00 00 06 20 aic94xx: 14: 07 00 00 00 aic94xx: 18: 00 00 00 00 aic94xx: control_phy_tasklet_complete: phy7, lrate:0x9, proto:0xe aic94xx: escb_tasklet_complete: phy7: BYTES_DMAED aic94xx: SAS proto IDENTIFY: aic94xx: 00: 20 00 02 02 aic94xx: 04: 00 00 00 00 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 50 05 07 6a aic94xx: 10: 00 00 2c 50 aic94xx: 14: 08 00 00 00 aic94xx: 18: 00 00 00 00 aic94xx: control_phy_tasklet_complete: phy3, lrate:0x9, proto:0xe aic94xx: escb_tasklet_complete: phy3: BYTES_DMAED aic94xx: SAS proto IDENTIFY: aic94xx: 00: 20 00 02 02 aic94xx: 04: 00 00 00 00 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 50 05 07 6a aic94xx: 10: 00 00 06 20 aic94xx: 14: 08 00 00 00 aic94xx: 18: 00 00 00 00 aic94xx: control_phy_tasklet_complete: phy5, lrate:0x9, proto:0xe aic94xx: escb_tasklet_complete: phy5: BYTES_DMAED aic94xx: SAS proto IDENTIFY: aic94xx: 00: 20 00 02 02 aic94xx: 04: 00 00 00 00 aic94xx: 08: 00 00 00 00 aic94xx: 0c: 50 05 07 6a aic94xx: 10: 00 00 2c 50 aic94xx: 14: 04 00 00 00 aic94xx: 18: 00 00 00 00 sas: phy4 added to port0, phy_mask:0x10 sas: phy0 added to port1, phy_mask:0x1 sas: phy1 matched wide port1 sas: phy1 added to port1, phy_mask:0x3 sas: phy6 matched wide port0 sas: phy6 added to port0, phy_mask:0x50 sas: phy2 matched wide port1 sas: phy2 added to port1, phy_mask:0x7 sas: phy7 matched wide port0 sas: phy7 added to port0, phy_mask:0xd0 sas: phy3 matched wide port1 sas: phy3 added to port1, phy_mask:0xf sas: phy5 matched wide port0 sas: phy5 added to port0, phy_mask:0xf0 sas: DOING DISCOVERY on port 0, pid:869 sas: ex 5005076a00002c50 phy00:D attached: 50010b9000001369 sas: ex 5005076a00002c50 phy01:T attached: 0000000000000000 sas: ex 5005076a00002c50 phy02:T attached: 0000000000000000 sas: ex 5005076a00002c50 phy03:S attached: 5005076a0115a840 sas: ex 5005076a00002c50 phy04:S attached: 5005076a0115a840 sas: ex 5005076a00002c50 phy05:T attached: 0000000000000000 sas: ex 5005076a00002c50 phy06:T attached: 0000000000000000 sas: ex 5005076a00002c50 phy07:S attached: 5005076a0115a840 sas: ex 5005076a00002c50 phy08:S attached: 5005076a0115a840 sas: ex 5005076a00002c50 phy09:T attached: 0000000000000000 sas: ex 5005076a00002c50 phy10:T attached: 0000000000000000 sas: ex 5005076a00002c50 phy11:T attached: 0000000000000000 sas: ex 5005076a00002c50 phy12:D attached: 5005076a00002c5d scsi 0:0:0:0: Direct access IBM-ESXS BBA036C3ESTT0Z N BH06 PQ: 0 ANSI: 5 SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) sda: Write Protect is off sda: Mode Sense: d3 00 10 08 SCSI device sda: drive cache: write through w/ FUA SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) sda: Write Protect is off sda: Mode Sense: d3 00 10 08 SCSI device sda: drive cache: write through w/ FUA sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda scsi 0:0:1:0: Enclosure IBM-ESXS VSC7160 1.01 PQ: 0 ANSI: 3 sas: device 5005076a00002c5d, LUN 0 doesn't support TCQ sas: DONE DISCOVERY on port 0, pid:869, result:0 sas: DOING DISCOVERY on port 1, pid:869 sas: ex 5005076a00000620 phy00:T attached: 0000000000000000 sas: ex 5005076a00000620 phy01:T attached: 0000000000000000 sas: ex 5005076a00000620 phy02:T attached: 0000000000000000 sas: ex 5005076a00000620 phy03:S attached: 5005076a0115a840 sas: ex 5005076a00000620 phy04:S attached: 5005076a0115a840 sas: ex 5005076a00000620 phy05:T attached: 0000000000000000 sas: ex 5005076a00000620 phy06:T attached: 0000000000000000 sas: ex 5005076a00000620 phy07:S attached: 5005076a0115a840 sas: ex 5005076a00000620 phy08:S attached: 5005076a0115a840 sas: ex 5005076a00000620 phy09:T attached: 0000000000000000 sas: ex 5005076a00000620 phy10:T attached: 0000000000000000 sas: ex 5005076a00000620 phy11:T attached: 0000000000000000 sas: ex 5005076a00000620 phy12:D attached: 5005076a0000062d scsi 0:0:2:0: Enclosure IBM-ESXS VSC7160 1.01 PQ: 0 ANSI: 3 sas: device 5005076a0000062d, LUN 0 doesn't support TCQ sas: DONE DISCOVERY on port 1, pid:869, result:0 - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
