On Mon, 2018-07-16 at 15:13 +-0530, Sayali Lokhande wrote: +AD4- +- This file shows the current ufs configuration descriptor set in device. +AD4- +- This can be used to provision ufs device if bConfigDescrLock is 0. +AD4- +- For more details, refer 14.1.6.3 Configuration Descriptor and +AD4- +- Table 14-12 - Unit Descriptor configurable parameters from specs for +AD4- +- description of each configuration descriptor parameter. +AD4- +- Configuration descriptor buffer needs to be passed in space separated +AD4- +- format specificied as below: +AD4- +- echo +ADw-bLength+AD4- +ADw-bDescriptorIDN+AD4- +ADw-bConfDescContinue+AD4- +ADw-bBootEnable+AD4- +AD4- +- +ADw-bDescrAccessEn+AD4- +ADw-bInitPowerMode+AD4- +ADw-bHighPriorityLUN+AD4- +AD4- +- +ADw-bSecureRemovalType+AD4- +ADw-bInitActiveICCLevel+AD4- +ADw-wPeriodicRTCUpdate+AD4- +AD4- +- +ADw-0Bh:0Fh+AF8-ReservedAs+AF8-0+AD4- +ADw-bLUEnable+AD4- +ADw-bBootLunID+AD4- +ADw-bLUWriteProtect+AD4- +AD4- +- +ADw-bMemoryType+AD4- +ADw-dNumAllocUnits+AD4- +ADw-bDataReliability+AD4- +ADw-bLogicalBlockSize+AD4- +AD4- +- +ADw-bProvisioningType+AD4- +ADw-wContextCapabilities+AD4- +ADw-0Dh:0Fh+AF8-ReservedAs+AF8-0+AD4- +AD4- +- +AD4- /config/XXXX.ufshc/ufs+AF8-provision I think the person who suggested to use configfs expected you to create one configfs attribute per value instead of writing a long list of values into a single configfs attribute. Bart.
