https://bugzilla.kernel.org/show_bug.cgi?id=199703 --- Comment #25 from Don (don.brace@xxxxxxxxxxxxx) --- I was able to take the kernel.org driver and load over a P400, which I believe is older than your E200. The E200 requires a working cache module for RAID 5 volumes. But you are using a RAID 0...correct? [ 2674.521073] HP HPSA Driver (v 3.4.20-125) [ 2674.531481] hpsa 0000:04:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2674.552657] hpsa 0000:04:00.0: Logical aborts not supported [ 2674.560739] hpsa 0000:04:00.0: HP SSD Smart Path aborts not supported [ 2674.661018] scsi host6: hpsa [ 2674.664782] hpsa can't handle SMP requests [ 2674.670676] hpsa 0000:0a:00.0: legacy board ID: 0x3234103c [ 2674.691098] hpsa 0000:0a:00.0: legacy board ID: 0x3234103c [ 2674.696897] hpsa 0000:0a:00.0: can't disable ASPM; OS doesn't have ASPM control [ 2674.720169] hpsa 0000:0a:00.0: Logical aborts not supported [ 2674.727691] hpsa 0000:0a:00.0: HP SSD Smart Path aborts not supported [ 2674.868022] scsi host7: hpsa [ 2674.871929] hpsa can't handle SMP requests [ 2675.112139] hpsa 0000:0a:00.0: scsi 7:0:0:0: masked Direct-Access HP DF146BB6C2 PHYS DRV SSDSmartPathCap- En- Exp=0 [ 2675.113001] hpsa 0000:0a:00.0: scsi 7:1:0:0: added Direct-Access HP LOGICAL VOLUME RAID-1(+0) SSDSmartPathCap- En- Exp=1 [ 2675.113001] hpsa 0000:0a:00.0: scsi 7:3:0:0: added RAID HP P400 controller SSDSmartPathCap- En- Exp=1 [root@localhost scsi]# lsscsi [0:0:0:0] disk ASMT 2105 0 /dev/sdb [6:0:0:0] storage HP P421 6.68 - [6:1:0:0] disk HP LOGICAL VOLUME 6.68 /dev/sda [7:1:0:0] disk HP LOGICAL VOLUME 7.24 /dev/sdc [7:3:0:0] storage HP P400 7.24 - -- You are receiving this mail because: You are the assignee for the bug.
