This patch adds Configfs support to provision ufs device at runtime. This feature can be primarily useful in factory or assembly line as some devices may be required to be configured multiple times during initial system development phase. Configuration Descriptors can be written multiple times until bConfigDescrLock attribute is zero. Configuration descriptor buffer consists of Device and Unit descriptor configurable parameters which are parsed from vendor specific provisioning file and then passed via configfs node at runtime to provision ufs device. Chages since V4: 1)scsi: ufs: set the device reference clock setting Used "assigned-clock-rates" DT property to pass required ref clk frequency. 2)scsi: ufs: Add configfs support for ufs provisioning Combined previous patch(2) and patch(3) into single patch which adds configfs provisioning support in driver. Removed extra sw provisioning related fields (like lun_to_grow, commit) and its related code. Updated Documentation to match configuration descriptor buffer parameters to be passed as per specs. Removed global ufs_hba ptr added in ufs-configfs file and instead passed *hba in ufs configfs init()/store()/show() api's. This is to support embedded as well as removable ufs card provisioning via configfs. Changes since V3: 1)scsi: ufs: set the device reference clock setting Updated logic to retain default ref_clk frequency setting programmed in device in case if invalid value is passed via devicetree setting. Replaced of_property_read_u32() with device_property_read_u32(). Removed invalid checks. 2)scsi: ufs: Add ufs provisioning support Added pm_runtime_get/put_sync and scsi_block/unblock_request in runtime provisioning for stable operation. 3)scsi: ufs: Add configfs support for ufs provisioning Updated Documentation with missing buffer entries required for runtime provisioning. Used config option to support conditional compilation for configfs api's. Changes since V2: Added configfs support for ufs provisioning and removed sysfs support. Changes since V1: Added device tree entry to parse reference clock frequency instead of hardcoding 19.2 MHz, as it can vary for different vendors. Also removed setting ref_clk again during runtime provisioning as it will be already set during probe. Used get_unaligned_be*/put_unaligned_be* where applicable. Changes since RFC: Added check to avoid ufs runtime provisioning if Configuration decriptor lock attribute is set to one. Instead of parsing ref_clk frequency via device tree, used correct enum ref_clk_freq value(19.2 Mhz for proviosioning). Added config_descriptor sysfs entry to provision ufs and also updated documentation for its correct usage. Added more protection against bad data handling in sysfs code. Sayali Lokhande (1): scsi: ufs: Add configfs support for ufs provisioning Subhash Jadavani (1): scsi: ufs: set the device reference clock setting Documentation/ABI/testing/configfs-driver-ufs | 18 +++ .../devicetree/bindings/ufs/ufshcd-pltfrm.txt | 7 + drivers/scsi/ufs/Makefile | 1 + drivers/scsi/ufs/ufs-configfs.c | 172 +++++++++++++++++++++ drivers/scsi/ufs/ufs.h | 9 ++ drivers/scsi/ufs/ufshcd-pltfrm.c | 2 + drivers/scsi/ufs/ufshcd.c | 64 ++++++++ drivers/scsi/ufs/ufshcd.h | 21 +++ 8 files changed, 294 insertions(+) create mode 100644 Documentation/ABI/testing/configfs-driver-ufs create mode 100644 drivers/scsi/ufs/ufs-configfs.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
