Le Wed, 27 Jun 2018 18:48:56 +0000
Dave Carroll <david.carroll@xxxxxxxxxxxxx> écrivait:
> > Is this size consistent with the 4.13 kernel? That size is greater
> > than the 64-bit LBA addressing (0x93 539F B000).
>
> Sorry, that comment was incorrect, but I would like to see if the
> size is consistent between the kernels.
After a very long time, it finally boots up and sees the disks, but
here's the output from dmesg | grep aacraid:
[ 1.357760] Adaptec aacraid driver 1.2.1[50877]-custom
[ 1.388119] aacraid: Comm Interface type2 enabled
[ 3.405113] scsi host0: aacraid
[ 50.156024] aacraid: Host adapter abort request.
aacraid: Outstanding commands on (0,0,0,0):
[ 50.156126] aacraid: Host adapter abort request.
aacraid: Outstanding commands on (0,0,0,0):
[ 50.172032] aacraid: Host adapter reset request. SCSI hang ?
[ 65.536106] aacraid: Host adapter reset request. SCSI hang ?
[ 65.536204] aacraid 0000:01:00.0: outstanding cmd: midlevel-0
[ 65.536206] aacraid 0000:01:00.0: outstanding cmd: lowlevel-0
[ 65.536207] aacraid 0000:01:00.0: outstanding cmd: error handler-0
[ 65.536208] aacraid 0000:01:00.0: outstanding cmd: firmware-2
[ 65.536210] aacraid 0000:01:00.0: outstanding cmd: kernel-0
[ 65.536228] aacraid 0000:01:00.0: Controller reset type is 3
[ 65.536314] aacraid 0000:01:00.0: Issuing IOP reset
[ 98.675617] aacraid 0000:01:00.0: IOP reset succeded
[ 98.684161] aacraid: Comm Interface type2 enabled
[ 110.015352] aacraid 0000:01:00.0: Scheduling bus rescan
[ 166.896116] aacraid: Host adapter reset request. SCSI hang ?
[ 166.896214] aacraid 0000:01:00.0: outstanding cmd: midlevel-0
[ 166.896216] aacraid 0000:01:00.0: outstanding cmd: lowlevel-0
[ 166.896217] aacraid 0000:01:00.0: outstanding cmd: error handler-0
[ 166.896218] aacraid 0000:01:00.0: outstanding cmd: firmware-2
[ 166.896220] aacraid 0000:01:00.0: outstanding cmd: kernel-0
[ 166.896236] aacraid 0000:01:00.0: Controller reset type is 3
[ 166.896322] aacraid 0000:01:00.0: Issuing IOP reset
[ 198.858466] aacraid 0000:01:00.0: IOP reset succeded
[ 198.870660] aacraid: Comm Interface type2 enabled
[ 211.129896] aacraid 0000:01:00.0: Scheduling bus rescan
[ 228.844034] aacraid: Host adapter abort request.
aacraid: Outstanding commands on (0,0,0,0):
[ 266.835610] aacraid: Host adapter reset request. SCSI hang ?
[ 266.837891] aacraid 0000:01:00.0: outstanding cmd: midlevel-0
[ 266.837894] aacraid 0000:01:00.0: outstanding cmd: lowlevel-0
[ 266.837897] aacraid 0000:01:00.0: outstanding cmd: error handler-0
[ 266.837899] aacraid 0000:01:00.0: outstanding cmd: firmware-2
[ 266.837902] aacraid 0000:01:00.0: outstanding cmd: kernel-0
[ 266.837939] aacraid 0000:01:00.0: Controller reset type is 3
[ 266.840415] aacraid 0000:01:00.0: Issuing IOP reset
[ 299.846642] aacraid 0000:01:00.0: IOP reset succeded
[ 299.858811] aacraid: Comm Interface type2 enabled
[ 312.098221] aacraid 0000:01:00.0: Scheduling bus rescan
[ 367.869277] aacraid: Host adapter reset request. SCSI hang ?
[ 367.871382] aacraid 0000:01:00.0: outstanding cmd: midlevel-0
[ 367.871385] aacraid 0000:01:00.0: outstanding cmd: lowlevel-0
[ 367.871387] aacraid 0000:01:00.0: outstanding cmd: error handler-0
[ 367.871389] aacraid 0000:01:00.0: outstanding cmd: firmware-2
[ 367.871391] aacraid 0000:01:00.0: outstanding cmd: kernel-0
[ 367.871480] aacraid 0000:01:00.0: Controller reset type is 3
[ 367.873982] aacraid 0000:01:00.0: Issuing IOP reset
[ 400.765513] aacraid 0000:01:00.0: IOP reset succeded
[ 400.776673] aacraid: Comm Interface type2 enabled
[ 413.036505] aacraid 0000:01:00.0: Scheduling bus rescan
[ 468.995678] aacraid: Host adapter reset request. SCSI hang ?
[ 468.995700] aacraid 0000:01:00.0: outstanding cmd: midlevel-0
[ 468.995704] aacraid 0000:01:00.0: outstanding cmd: lowlevel-0
[ 468.995706] aacraid 0000:01:00.0: outstanding cmd: error handler-0
[ 468.995709] aacraid 0000:01:00.0: outstanding cmd: firmware-2
[ 468.995711] aacraid 0000:01:00.0: outstanding cmd: kernel-0
[ 468.995740] aacraid 0000:01:00.0: Controller reset type is 3
[ 468.995745] aacraid 0000:01:00.0: Issuing IOP reset
[ 501.875537] aacraid 0000:01:00.0: IOP reset succeded
[ 501.887288] aacraid: Comm Interface type2 enabled
[ 514.148609] aacraid 0000:01:00.0: Scheduling bus rescan
The RAID controller is unusable, obviously. Rebooting with 4.13, now...
--
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <eflorac@xxxxxxxxxxxxxx>
| +33 1 78 94 84 02
------------------------------------------------------------------------
Attachment:
pgpkvZ6o7CTC7.pgp
Description: Signature digitale OpenPGP
