Le Wed, 27 Jun 2018 18:20:27 +0200
Emmanuel Florac <eflorac@xxxxxxxxxxxxxx> écrivait:
> As per my previous post, I've determined that the aacraid driver
> doesn't work with current Adaptec RAID controllers (ASR8xxx family,
> latest firmware) with kernels over 4.14. Kernel up to 4.15 works with
> ASR7xxx family but kernel 4.16 doesn't work either with ASR7xxx nor
> ASR8xxx controllers.
>
> I've just retried running the latest 4.16.18 (plain vanilla) on Debian
> stable:
>
> Running "modprobe aacraid", the driver hangs and resets the controller
> constantly. rebooting the system on earlier kernels up to 4.13.xx
> everything *just works* without any problem. dmesg output:
>
> [ 344.845719] Adaptec aacraid driver 1.2.1[50877]-custom
> [ 344.852250] aacraid: Comm Interface type2 enabled
> [ 344.859381] AAC0: kernel 7.13-0[33263] Mar 16 2018
> [ 344.859384] AAC0: monitor 7.13-0[33263]
> [ 344.859385] AAC0: bios 7.13-0[33263]
> [ 344.859388] AAC0: serial 6A476396945
> [ 344.859389] AAC0: Non-DASD support enabled.
> [ 346.869001] scsi host6: aacraid
> [ 346.869500] scsi 6:0:2:0: Direct-Access ASR8885
For comparison, here's the output booting 4.13.16 (the highest working
release) on the same system ; driver version is slightly different:
[ 5.762727] Adaptec aacraid driver 1.2.1[50834]-custom
[ 5.768147] aacraid: Comm Interface type2 enabled
[ 5.775262] AAC0: kernel 7.13-0[33263] Mar 16 2018
[ 5.775264] AAC0: monitor 7.13-0[33263]
[ 5.775265] AAC0: bios 7.13-0[33263]
[ 5.775267] AAC0: serial 6A476396945
[ 5.775268] AAC0: Non-DASD support enabled.
[ 7.782209] scsi host6: aacraid
[ 7.782629] scsi 6:0:2:0: Direct-Access ASR8885 raid3 V1.0 PQ: 0 ANSI: 2
[ 7.782735] sd 6:0:2:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 7.782743] sd 6:0:2:0: [sdb] 632763166720 512-byte logical blocks: (324 TB/295 TiB)
[ 7.782751] sd 6:0:2:0: [sdb] Write Protect is off
[ 7.782752] sd 6:0:2:0: [sdb] Mode Sense: 12 00 10 08
[ 7.782764] sd 6:0:2:0: [sdb] Write cache: disabled, read cache: enabled, supports DPO and FUA
[ 7.782832] sd 6:0:2:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 7.808366] scsi 6:1:105:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.809387] scsi 6:1:106:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.810895] scsi 6:1:107:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.811889] scsi 6:1:108:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.812131] sd 6:0:2:0: [sdb] Very big device. Trying to use READ CAPACITY(16).
[ 7.812156] sd 6:0:2:0: [sdb] Attached SCSI removable disk
[ 7.812884] scsi 6:1:109:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.813886] scsi 6:1:110:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.814861] scsi 6:1:111:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.815994] scsi 6:1:112:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.817001] scsi 6:1:113:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.818019] scsi 6:1:114:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.819004] scsi 6:1:115:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.820103] scsi 6:1:116:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.821087] scsi 6:1:117:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.822065] scsi 6:1:118:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.824714] scsi 6:1:119:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.825785] scsi 6:1:120:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.826830] scsi 6:1:121:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.829031] scsi 6:1:122:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.830013] scsi 6:1:123:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.831022] scsi 6:1:124:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.832033] scsi 6:1:125:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.833098] scsi 6:1:126:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.834078] scsi 6:1:127:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.835077] scsi 6:1:128:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.836046] scsi 6:1:129:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.837025] scsi 6:1:130:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.838002] scsi 6:1:131:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.838984] scsi 6:1:132:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.839965] scsi 6:1:133:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
[ 7.840939] scsi 6:1:134:0: Direct-Access HGST HUH721212AL5200 A3D0 PQ: 1 ANSI: 6
--
------------------------------------------------------------------------
Emmanuel Florac | Direction technique
| Intellique
| <eflorac@xxxxxxxxxxxxxx>
| +33 1 78 94 84 02
------------------------------------------------------------------------
Attachment:
pgp_RO6aKbWfu.pgp
Description: Signature digitale OpenPGP
