[PATCH v1] mpt3sas: Fix calltrace observed while running IO & host reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Below kernel BUG was observed while running IOs with host reset
(issued from application),

mpt3sas_cm0: diag reset: SUCCESS
------------[ cut here ]------------
WARNING: CPU: 12 PID: 4336 at drivers/scsi/mpt3sas/mpt3sas_base.c:3282 mpt3sas_base_clear_st+0x3d/0x40 [mpt3sas]
Modules linked in: macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support
 dcdbas pcspkr joydev ipmi_ssif ses enclosure sg ipmi_devintf acpi_pad ipmi_msghandler acpi_power_meter mei_me lpc_ich wmi mei shpchp ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi uas usb_storage mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix mpt3sas libata crct10dif_pclmul crct10dif_common tg3 crc32c_intel i2c_core raid_class ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 4336 Comm: python Kdump: loaded Tainted: G        W      ------------   3.10.0-875.el7.brdc.x86_64 #1
Hardware name: Dell Inc. PowerEdge R820/0YWR73, BIOS 1.5.0 03/08/2013
Call Trace:
 [<ffffffff9cf16583>] dump_stack+0x19/0x1b
 [<ffffffff9c891698>] __warn+0xd8/0x100
 [<ffffffff9c8917dd>] warn_slowpath_null+0x1d/0x20
 [<ffffffffc04f3f4d>] mpt3sas_base_clear_st+0x3d/0x40 [mpt3sas]
 [<ffffffffc05047d2>] _scsih_flush_running_cmds+0x92/0xe0 [mpt3sas]
 [<ffffffffc05095db>] mpt3sas_scsih_reset_handler+0x43b/0xaf0 [mpt3sas]
 [<ffffffff9c894829>] ? vprintk_default+0x29/0x40
 [<ffffffff9cf10531>] ? printk+0x60/0x77
 [<ffffffffc04f06c8>] ? _base_diag_reset+0x238/0x340 [mpt3sas]
 [<ffffffffc04f794d>] mpt3sas_base_hard_reset_handler+0x1ad/0x420 [mpt3sas]
 [<ffffffffc05132b9>] _ctl_ioctl_main.isra.12+0x11b9/0x1200 [mpt3sas]
 [<ffffffffc068d585>] ? xfs_file_aio_write+0x155/0x1b0 [xfs]
 [<ffffffff9ca1a4e3>] ? do_sync_write+0x93/0xe0
 [<ffffffffc051337a>] _ctl_ioctl+0x1a/0x20 [mpt3sas]
 [<ffffffff9ca2fe90>] do_vfs_ioctl+0x350/0x560
 [<ffffffff9ca1dec1>] ? __sb_end_write+0x31/0x60
 [<ffffffff9ca30141>] SyS_ioctl+0xa1/0xc0
 [<ffffffff9cf28715>] ? system_call_after_swapgs+0xa2/0x146
 [<ffffffff9cf287d5>] system_call_fastpath+0x1c/0x21
 [<ffffffff9cf28721>] ? system_call_after_swapgs+0xae/0x146
---[ end trace 5dac5b98d89aaa3c ]---
------------[ cut here ]------------
kernel BUG at block/blk-core.c:1476!
invalid opcode: 0000 [#1] SMP
Modules linked in: macsec tcp_diag udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc fuse xt_CHECKSUM ipt_MASQUERADE nf_nat_masquerade_ipv4 tun devlink ip6t_rpfilter ipt_REJECT nf_reject_ipv4 ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter sunrpc vfat fat sb_edac intel_powerclamp coretemp intel_rapl iosf_mbi kvm_intel kvm irqbypass crc32_pclmul ghash_clmulni_intel aesni_intel lrw gf128mul glue_helper ablk_helper cryptd iTCO_wdt iTCO_vendor_support
 dcdbas pcspkr joydev ipmi_ssif ses enclosure sg ipmi_devintf acpi_pad ipmi_msghandler acpi_power_meter mei_me lpc_ich wmi mei shpchp ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic ata_generic pata_acpi uas usb_storage mgag200 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix mpt3sas libata crct10dif_pclmul crct10dif_common tg3 crc32c_intel i2c_core raid_class ptp scsi_transport_sas pps_core dm_mirror dm_region_hash dm_log dm_mod
CPU: 12 PID: 4336 Comm: python Kdump: loaded Tainted: G        W      ------------   3.10.0-875.el7.brdc.x86_64 #1
Hardware name: Dell Inc. PowerEdge R820/0YWR73, BIOS 1.5.0 03/08/2013
task: ffff903fc96e0fd0 ti: ffff903fb1eec000 task.ti: ffff903fb1eec000
RIP: 0010:[<ffffffff9cb19ec0>]  [<ffffffff9cb19ec0>] blk_requeue_request+0x90/0xa0
RSP: 0018:ffff903c6b783dc0  EFLAGS: 00010087
RAX: ffff903bb67026d0 RBX: ffff903b7d6a6140 RCX: dead000000000200
RDX: ffff903bb67026d0 RSI: ffff903bb6702580 RDI: ffff903bb67026d0
RBP: ffff903c6b783dd8 R08: ffff903bb67026d0 R09: ffffd97e80000000
R10: ffff903c658bac00 R11: 0000000000000000 R12: ffff903bb6702580
R13: ffff903fa9a292f0 R14: 0000000000000246 R15: 0000000000001057
FS:  00007f7026f5b740(0000) GS:ffff903c6b780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f298877c004 CR3: 00000000caf36000 CR4: 00000000000607e0
Call Trace:
 <IRQ>
 [<ffffffff9cca68ff>] __scsi_queue_insert+0xbf/0x110
 [<ffffffff9cca79ca>] scsi_io_completion+0x5da/0x6a0
 [<ffffffff9cc9ca3c>] scsi_finish_command+0xdc/0x140
 [<ffffffff9cca6aa2>] scsi_softirq_done+0x132/0x160
 [<ffffffff9cb240c6>] blk_done_softirq+0x96/0xc0
 [<ffffffff9c89a905>] __do_softirq+0xf5/0x280
 [<ffffffff9cf2bd2c>] call_softirq+0x1c/0x30
 [<ffffffff9c82d625>] do_softirq+0x65/0xa0
 [<ffffffff9c89ac85>] irq_exit+0x105/0x110
 [<ffffffff9cf2d0a8>] smp_apic_timer_interrupt+0x48/0x60
 [<ffffffff9cf297f2>] apic_timer_interrupt+0x162/0x170
 <EOI>
 [<ffffffff9cca5f41>] ? scsi_done+0x21/0x60
 [<ffffffff9cb5ac18>] ? delay_tsc+0x38/0x60
 [<ffffffff9cb5ab5d>] __const_udelay+0x2d/0x30
 [<ffffffffc04effde>] _base_handshake_req_reply_wait+0x8e/0x4a0 [mpt3sas]
 [<ffffffffc04f0b13>] _base_get_ioc_facts+0x123/0x590 [mpt3sas]
 [<ffffffffc04f06c8>] ? _base_diag_reset+0x238/0x340 [mpt3sas]
 [<ffffffffc04f7993>] mpt3sas_base_hard_reset_handler+0x1f3/0x420 [mpt3sas]
 [<ffffffffc05132b9>] _ctl_ioctl_main.isra.12+0x11b9/0x1200 [mpt3sas]
 [<ffffffffc068d585>] ? xfs_file_aio_write+0x155/0x1b0 [xfs]
 [<ffffffff9ca1a4e3>] ? do_sync_write+0x93/0xe0
 [<ffffffffc051337a>] _ctl_ioctl+0x1a/0x20 [mpt3sas]
 [<ffffffff9ca2fe90>] do_vfs_ioctl+0x350/0x560
 [<ffffffff9ca1dec1>] ? __sb_end_write+0x31/0x60
 [<ffffffff9ca30141>] SyS_ioctl+0xa1/0xc0
 [<ffffffff9cf28715>] ? system_call_after_swapgs+0xa2/0x146
 [<ffffffff9cf287d5>] system_call_fastpath+0x1c/0x21
 [<ffffffff9cf28721>] ? system_call_after_swapgs+0xae/0x146
Code: 83 c3 10 4c 89 e2 4c 89 ee e8 8d 21 04 00 48 8b 03 48 85 c0 75 e5 41 f6 44 24 4a 10 74 ad 4c 89 e6 4c 89 ef e8 b2 42 00 00 eb a0 <0f> 0b 0f 1f 40 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90
RIP  [<ffffffff9cb19ec0>] blk_requeue_request+0x90/0xa0
 RSP <ffff903c6b783dc0>

As a part of host reset operation, driver will flushout all IOs
outstanding at driver level with "DID_RESET" result.
To find which are all commands outstanding at the driver level,
driver loops with smid starting from one to HBA queue depth and
calls mpt3sas_scsih_scsi_lookup_get() to get scmd as shown below

 for (smid = 1; smid <= ioc->scsiio_depth; smid++) {
                scmd = mpt3sas_scsih_scsi_lookup_get(ioc, smid);
                if (!scmd)
                        continue;

But in mpt3sas_scsih_scsi_lookup_get() function, driver returns some
scsi cmnds which are not outstanding at the driver level (possibly request
is constructed at block layer since QUEUE_FLAG_QUIESCED is not set. Even if
driver uses scsi_block_requests and scsi_unblock_requests, issue still
persists as they will be just blocking further IO from scsi layer and
not from block layer) and these commands are flushed with
DID_RESET host bytes thus resulting into above kernel BUG.

To fix this issue, we have modified the mpt3sas_scsih_scsi_lookup_get()
to check for smid equals to zero (note: whenever any scsi cmnd is
outstanding at the driver level then smid for that scsi cmnd won't
be zero, always it starts from one) before it returns the scmd pointer to
the caller. If smid is zero then this function returns scmd pointer as
NULL and driver won't flushout those scsi cmnds at driver level with
DID_RESET host byte thus this issue will not be observed.

Signed-off-by: Chaitra P B <chaitra.basappa@xxxxxxxxxxxx>
Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@xxxxxxxxxxxx>
---
 drivers/scsi/mpt3sas/mpt3sas_base.c  | 1 +
 drivers/scsi/mpt3sas/mpt3sas_scsih.c | 2 +-
 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 668f350..49d92d0 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -3309,6 +3309,7 @@ void mpt3sas_base_clear_st(struct MPT3SAS_ADAPTER *ioc,
 		return;
 	st->cb_idx = 0xFF;
 	st->direct_io = 0;
+	st->smid = 0;
 	atomic_set(&ioc->chain_lookup[st->smid - 1].chain_offset, 0);
 }
 
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
index 23902ad..96e523a 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
@@ -1489,7 +1489,7 @@ struct scsi_cmnd *
 		scmd = scsi_host_find_tag(ioc->shost, unique_tag);
 		if (scmd) {
 			st = scsi_cmd_priv(scmd);
-			if (st->cb_idx == 0xFF)
+			if (st->cb_idx == 0xFF || st->smid == 0)
 				scmd = NULL;
 		}
 	}
-- 
1.8.3.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux