This is mostly updates to the usual drivers: ufs, qedf, mpt3sas, lpfc,
xfcp, hisi_sas, cxlflash, qla2xxx. In the absence of Nic, we're also
taking target updates which are mostly minor except for the tcmu
refactor. The only real core change to worry about is the removal of
high page bouncing (in sas, storvsc and iscsi). This has been well
tested and no problems have shown up so far.
There's a minor merge conflict in drivers/scsi/qedf.h where both we and
the net-next tree have added prototypes to the same part of the file,
but I'm sure you can sort it out.
The patch is available here:
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi.git scsi-misc
The short changelog is:
Alim Akhtar (4):
scsi: ufs: make ufshcd_config_pwr_mode of non-static func
scsi: ufs: add quirk to enable host controller without hce
scsi: ufs: add quirk to disallow reset of interrupt aggregation
scsi: ufs: add quirk to fix mishandling utrlclr/utmrlclr
Andrei Vagin (2):
scsi: target: target/file: Add support of direct and async I/O
scsi: qla2xxx: remove the unused tcm_qla2xxx_cmd_wq
Arnd Bergmann (2):
scsi: ips: fix firmware timestamps for 32-bit
scsi: esas2r: use ktime_get_real_seconds()
Bart Van Assche (2):
scsi: sd_zbc: Let the SCSI core handle ILLEGAL REQUEST / ASC 0x21
scsi: sd_zbc: Change the type of the ZBC fields into u32
Bjorn Andersson (2):
scsi: ufs: Use freq table with devfreq
scsi: ufs: Extract devfreq registration
Chad Dupuis (20):
scsi: qedf: Update version number to 8.33.16.20
scsi: qedf: Update copyright for 2018
scsi: qedf: Add more defensive checks for concurrent error conditions
scsi: qedf: Set the UNLOADING flag when removing a vport
scsi: qedf: Add additional checks when restarting an rport due to ABTS timeout
scsi: qedf: If qed fails to enable MSI-X fail PCI probe
scsi: qedf: Honor default_prio module parameter even if DCBX does not converge
scsi: qedf: Improve firmware debug dump handling
scsi: qedf: Add task id to kref_get_unless_zero() debug messages when flushing requests
scsi: qedf: Check if link is already up when receiving a link up event from qed
scsi: qedf: Return request as DID_NO_CONNECT if MSI-X is not enabled
scsi: qedf: Release RRQ reference correctly when RRQ command times out
scsi: qedf: Honor priority from DCBX FCoE App tag
scsi: qedf: Add dcbx_not_wait module parameter so we won't wait for DCBX convergence to start discovery
scsi: qedf: Sanity check FCoE/FIP priority value to make sure it's between 0 and 7
scsi: qedf: Add check for offload before flushing I/Os for target
scsi: qedf: Fix VLAN display when printing sent FIP frames
scsi: qedf: Add missing skb frees in error path
scsi: qedf: Increase the number of default FIP VLAN request retries to 60
scsi: qedf: Synchronize rport restarts when multiple ELS commands time out
Chaitra P B (14):
scsi: mpt3sas: Update driver version "25.100.00.00"
scsi: mpt3sas: fix possible memory leak.
scsi: mpt3sas: For NVME device, issue a protocol level reset
scsi: mpt3sas: Update MPI Headers
scsi: mpt3sas: Report Firmware Package Version from HBA Driver.
scsi: mpt3sas: Cache enclosure pages during enclosure add.
scsi: mpt3sas: Allow processing of events during driver unload.
scsi: mpt3sas: Increase event log buffer to support 24 port HBA's.
scsi: mpt3sas: Added support for SAS Device Discovery Error Event.
scsi: mpt3sas: Enhanced handling of Sense Buffer.
scsi: mpt3sas: Optimize I/O memory consumption in driver.
scsi: mpt3sas: Lockless access for chain buffers.
scsi: mpt3sas: Pre-allocate RDPQ Array at driver boot time.
scsi: mpt3sas: Bug fix for big endian systems.
Christoph Hellwig (3):
scsi: scsi_transport_sas: don't bounce highmem pages for the smp handler
scsi: storsvc: don't set a bounce limit
scsi: iscsi_tcp: don't set a bounce limit
Christophe Jaillet (1):
scsi: qlogicpti: Fix an error handling path in 'qpti_sbus_probe()'
Colin Ian King (12):
scsi: target: fix spelling mistake "Uknown" -> "Unknown"
scsi: pm80xx: fix spelling mistake "UNSORPORTED" -> "SUPPORTED"
scsi: snic: fix a couple of spelling mistakes: "COMPLETE"
scsi: esas2r: fix spelling mistake: "requestss" -> "requests"
scsi: mptsas: fix spelling mistake: "matchs" -> "matches"
scsi: lpfc: fix spelling mistakes: "mabilbox" and "maibox"
scsi: mptfusion: fix spelling mistake: "initators" -> "initiators"
scsi: mpt3sas: fix spelling mistake: "disbale" -> "disable"
scsi: megaraid_sas: fix spelling mistake: "disbale" -> "disable"
scsi: esas2r: fix spelling mistake: "asynchromous" -> "asynchronous"
scsi: isci: remove redundant check on in_connection_align_insertion_frequency
scsi: mptfc: fix spelling mistake in macro names
Dan Carpenter (1):
scsi: megaraid: silence a static checker bug
Douglas Gilbert (1):
scsi: core: sanitize++ in progress
Himanshu Jha (1):
scsi: megaraid_sas: Use zeroing memory allocator than allocator/memset
James Smart (28):
scsi: lpfc: update driver version to 12.0.0.4
scsi: lpfc: Fix port initialization failure.
scsi: lpfc: Fix 16gb hbas failing cq create.
scsi: lpfc: Fix crash in blk_mq layer when executing modprobe -r lpfc
scsi: lpfc: correct oversubscription of nvme io requests for an adapter
scsi: lpfc: Fix MDS diagnostics failure (Rx < Tx)
scsi: lpfc: Comment cleanup regarding Broadcom copyright header
scsi: lpfc: update driver version to 12.0.0.3
scsi: lpfc: Enhance log messages when reporting CQE errors
scsi: lpfc: Fix up log messages and stats counters in IO submit code path
scsi: lpfc: Driver NVME load fails when CPU cnt > WQ resource cnt
scsi: lpfc: Handle new link fault code returned by adapter firmware.
scsi: lpfc: Correct fw download error message
scsi: lpfc: enhance LE data structure copies to hardware
scsi: lpfc: Change IO submit return to EBUSY if remote port is recovering
scsi: lpfc: update driver version to 12.0.0.2
scsi: lpfc: Correct missing remoteport registration during link bounces
scsi: lpfc: Fix NULL pointer reference when resetting adapter
scsi: lpfc: Fix nvme remoteport registration race conditions
scsi: lpfc: Fix driver not recovering NVME rports during target link faults
scsi: lpfc: Fix WQ/CQ creation for older asic's.
scsi: lpfc: Fix NULL pointer access in lpfc_nvme_info_show
scsi: lpfc: Fix lingering lpfc_wq resource after driver unload
scsi: lpfc: Fix Abort request WQ selection
scsi: lpfc: Enlarge nvmet asynchronous receive buffer counts
scsi: lpfc: Add per io channel NVME IO statistics
scsi: lpfc: Correct target queue depth application changes
scsi: lpfc: Fix multiple PRLI completion error path
Jason Yan (1):
scsi: libsas: add transport class for ATA devices
Jens Remus (3):
scsi: zfcp: enhance comments on fc_link_speed and supported_speed
scsi: zfcp: add port speed capabilities
scsi: zfcp: assert that the ERP lock is held when tracing a recovery trigger
Jia-Ju Bai (2):
scsi: st: Replace GFP_ATOMIC with GFP_KERNEL in new_tape_buffer
scsi: st: Replace GFP_ATOMIC with GFP_KERNEL in st_probe
John Garry (5):
scsi: hisi_sas: Introduce hisi_sas_phy_set_linkrate()
scsi: hisi_sas: add readl poll timeout helper wrappers
scsi: hisi_sas: stop controller timer for reset
scsi: hisi_sas: remove some unneeded structure members
scsi: hisi_sas: print device id for errors
Kees Cook (3):
scsi: dpt_i2o: Remove VLA usage
scsi: ufs: ufshcd: Remove VLA usage
scsi: libosd: Remove VLA usage
Lee Duncan (2):
scsi: target: transport should handle st FM/EOM/ILI reads
scsi: target: prefer dbroot of /etc/target over /var/target
Long Li (3):
scsi: storvsc: Select channel based on available percentage of ring buffer to write
scsi: netvsc: Use the vmbus function to calculate ring buffer percentage
scsi: vmbus: Add function to report available ring buffer to write in total ring size percentage
Luc Van Oostenryck (1):
scsi: mptlan: Fix mpt_lan_sdu_send()'s return type
Martin Wilck (6):
scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS
scsi: devinfo: add BLIST_RETRY_ITF for EMC Symmetrix
scsi: devinfo: warn on undefined blist flags
scsi: devinfo: change blist_flag_t to 64bit
scsi: devinfo: use const_ilog2 for array indices
scsi: ilog2: create truly constant version for sparse
Matthew R. Ochs (2):
scsi: cxlflash: Use local mutex for AFU serialization
scsi: cxlflash: Avoid clobbering context control register value
Maya Erez (1):
scsi: ufs: fix exception event handling
Michael Kelley (1):
scsi: storvsc: Avoid allocating memory for temp cpumasks
Michael Schmitz (1):
scsi: zorro_esp: New driver for Amiga Zorro NCR53C9x boards
Quinn Tran (9):
scsi: qla2xxx: Fix TMF and Multi-Queue config
scsi: qla2xxx: Remove stale debug value for login_retry flag
scsi: qla2xxx: Use predefined get_datalen_for_atio() inline function
scsi: qla2xxx: Fix Inquiry command being dropped in Target mode
scsi: qla2xxx: Move GPSC and GFPNID out of session management
scsi: qla2xxx: Reduce redundant ADISC command for RSCNs
scsi: qla2xxx: Delete session for nport id change
scsi: qla2xxx: Fix Rport and session state getting out of sync
scsi: qla2xxx: Fix sending ADISC command for login
Randy Dunlap (4):
scsi: target: add driver-api document
scsi: target: target_core_user.[ch]: convert comments into DOC:
scsi: target: target_core_transport.c: enable+fix kernel-doc
scsi: target: target_core_transport.c: fix kernel-doc warnings
Saurav Kashyap (1):
scsi: qedf: Remove setting DCBX pending during soft context reset
Shivasharan S (2):
scsi: megaraid_sas: driver version upgrade
scsi: megaraid_sas: Increase timeout by 1 sec for non-RAID fastpath IOs
Souptick Joarder (2):
scsi: target: Change return type to vm_fault_t
scsi: sg: Change return type to vm_fault_t
Steffen Maier (22):
scsi: zfcp: cleanup indentation for posting FC events
scsi: zfcp: support SCSI_ADAPTER_RESET via scsi_host sysfs attribute host_reset
scsi: zfcp: explicitly support initiator in scsi_host_template
scsi: zfcp: remove unused return values of ERP trigger functions
scsi: zfcp: zfcp_erp_action_exists() does only check for running
scsi: zfcp: remove unused ERP enum values
scsi: zfcp: consistently use function name space prefix
scsi: zfcp: workqueue: set description for port work items with their WWPN as context
scsi: zfcp: decouple our scsi_eh callbacks from scsi_cmnd
scsi: zfcp: decouple TMFs from scsi_cmnd by using fc_block_rport
scsi: zfcp: decouple SCSI setup of TMF from scsi_cmnd
scsi: zfcp: decouple FSF request setup of TMF from scsi_cmnd
scsi: zfcp: split FCP_CMND IU setup between SCSI I/O and TMF again
scsi: zfcp: decouple TMF response handler from scsi_cmnd
scsi: zfcp: decouple SCSI traces for scsi_eh / TMF from scsi_cmnd
scsi: zfcp: fix missing REC trigger trace on enqueue without ERP thread
scsi: zfcp: fix missing REC trigger trace for all objects in ERP_FAILED
scsi: zfcp: fix missing REC trigger trace on terminate_rport_io for ERP_FAILED
scsi: zfcp: fix missing REC trigger trace on terminate_rport_io early return
scsi: zfcp: fix misleading REC trigger trace where erp_action setup failed
scsi: zfcp: fix missing SCSI trace for retry of abort / scsi_eh TMF
scsi: zfcp: fix missing SCSI trace for result of eh_host_reset_handler
Subhash Jadavani (3):
scsi: ufs: ufs-qcom: remove broken hci version quirk
scsi: ufs: add reference counting for scsi block requests
scsi: ufs: ufshcd: fix possible unclocked register access
Tomohiro Kusumi (2):
scsi: mpt3sas: fix header path in ioctl documentation
scsi: mpt3sas: remove obsolete path "drivers/scsi/mpt2sas/" from MAINTAINERS
Uma Krishnan (46):
scsi: cxlflash: Isolate external module dependencies
scsi: cxlflash: Abstract hardware dependent assignments
scsi: cxlflash: Add include guards to backend.h
scsi: cxlflash: Acquire semaphore before invoking ioctl services
scsi: cxlflash: Limit the debug logs in the IO path
scsi: cxlflash: Yield to active send threads
scsi: cxlflash: Handle spurious interrupts
scsi: cxlflash: Remove commmands from pending list on timeout
scsi: cxlflash: Synchronize reset and remove ops
scsi: cxlflash: Enable OCXL operations
scsi: cxlflash: Support AFU reset
scsi: cxlflash: Register for translation errors
scsi: cxlflash: Introduce OCXL context state machine
scsi: cxlflash: Update synchronous interrupt status bits
scsi: cxlflash: Setup LISNs for master contexts
scsi: cxlflash: Setup LISNs for user contexts
scsi: cxlflash: Introduce object handle fop
scsi: cxlflash: Support file descriptor mapping
scsi: cxlflash: Support adapter context mmap and release
scsi: cxlflash: Support adapter context reading
scsi: cxlflash: Support adapter context polling
scsi: cxlflash: Support starting user contexts
scsi: cxlflash: Support AFU interrupt mapping and registration
scsi: cxlflash: Support AFU interrupt management
scsi: cxlflash: Support process element lifecycle
scsi: cxlflash: Setup OCXL transaction layer
scsi: cxlflash: Setup function OCXL link
scsi: cxlflash: Support reading adapter VPD data
scsi: cxlflash: Support AFU state toggling
scsi: cxlflash: Support process specific mappings
scsi: cxlflash: Support starting an adapter context
scsi: cxlflash: MMIO map the AFU
scsi: cxlflash: Support image reload policy modification
scsi: cxlflash: Support adapter context discovery
scsi: cxlflash: Support adapter file descriptors for OCXL
scsi: cxlflash: Use IDR to manage adapter contexts
scsi: cxlflash: Adapter context support for OCXL
scsi: cxlflash: Setup AFU PASID
scsi: cxlflash: Setup AFU acTag range
scsi: cxlflash: Read host AFU configuration
scsi: cxlflash: Setup function acTag range
scsi: cxlflash: Read host function configuration
scsi: cxlflash: Hardware AFU for OCXL
scsi: cxlflash: Introduce OCXL backend
scsi: cxlflash: Add argument identifier names
scsi: cxlflash: Preserve number of interrupts for master contexts
Venkat Gopalakrishnan (1):
scsi: ufs: make sure all interrupts are processed
Vijay Viswanath (1):
scsi: ufs: Add clock ungating to a separate workqueue
Wei Yongjun (1):
scsi: hisi_sas: fix a typo in hisi_sas_task_prep()
Wen Xiong (1):
scsi: ipr: new IOASC update
Wenwen Wang (2):
scsi: 3w-xxxx: fix a missing-check bug
scsi: 3w-9xxx: fix a missing-check bug
Xiang Chen (20):
scsi: hisi_sas: Mark PHY as in reset for nexus reset
scsi: hisi_sas: Create a scsi_host_template per HW module
scsi: hisi_sas: Reset disks when discovered
scsi: hisi_sas: Change common allocation mode of device id
scsi: hisi_sas: change slot index allocation mode
scsi: hisi_sas: Use device lock to protect slot alloc/free
scsi: hisi_sas: Don't lock DQ for complete task sending
scsi: hisi_sas: allocate slot buffer earlier
scsi: hisi_sas: make return type of prep functions void
scsi: hisi_sas: relocate smp sg map
scsi: hisi_sas: config ATA de-reset as an constrained command for v3 hw
scsi: hisi_sas: update PHY linkrate after a controller reset
scsi: hisi_sas: check sas_dev gone earlier in hisi_sas_abort_task()
scsi: hisi_sas: fix PI memory size
scsi: hisi_sas: check host frozen before calling "done" function
scsi: hisi_sas: Add some checks to avoid free'ing a sas_task twice
scsi: hisi_sas: optimise the usage of DQ locking
scsi: hisi_sas: use dma_zalloc_coherent()
scsi: hisi_sas: delete timer when removing hisi_sas driver
scsi: hisi_sas: make SAS address of SATA disks unique
Xiaofei Tan (13):
scsi: hisi_sas: Fix return value when get_free_slot() failed
scsi: hisi_sas: Terminate STP reject quickly for v2 hw
scsi: hisi_sas: Add v2 hw force PHY function for internal ATA command
scsi: hisi_sas: Include TMF elements in struct hisi_sas_slot
scsi: hisi_sas: Try wait commands before before controller reset
scsi: hisi_sas: Init disks after controller reset
scsi: hisi_sas: Add LED feature for v3 hw
scsi: hisi_sas: add check of device in hisi_sas_task_exec()
scsi: hisi_sas: workaround a v3 hw hilink bug
scsi: hisi_sas: remove redundant handling to event95 for v3
scsi: hisi_sas: check IPTT is valid before using it for v3 hw
scsi: hisi_sas: consolidate command check in hisi_sas_get_ata_protocol()
scsi: hisi_sas: update RAS feature for later revision of v3 HW
Xose Vazquez Perez (2):
scsi: scsi_dh: replace too broad "TP9" string with the exact models
scsi: devinfo: delete duplicate "Generic"/"USB Storage-SMC" device
YueHaibing (4):
scsi: a100u2w: Use module_pci_driver
scsi: wd719x: Use module_pci_driver
scsi: am53c974: Use module_pci_driver
scsi: mvumi: Using module_pci_driver
Zhu Lingshan (6):
scsi: tcmu: refactor nl wr_cache attr with new helpers
scsi: tcmu: refactor nl dev_size attr with new helpers
scsi: tcmu: refactor nl dev_cfg attr with new nl helpers
scsi: tcmu: refactor rm_device cmd with new nl helpers
scsi: tcmu: refactor add_device cmd with new nl helpers
scsi: tcmu: add new netlink events helpers
himanshu.madhani@xxxxxxxxxx (2):
scsi: qla2xxx: Update driver version to 10.00.00.07-k
scsi: qla2xxx: Prevent relogin loop by removing stale code
And the diffstat:
Documentation/driver-api/index.rst | 1 +
Documentation/driver-api/scsi.rst | 2 +-
Documentation/driver-api/target.rst | 64 ++
Documentation/ioctl/ioctl-number.txt | 2 +-
MAINTAINERS | 1 -
drivers/ata/libata-scsi.c | 12 +
drivers/hv/ring_buffer.c | 2 +
drivers/message/fusion/lsi/mpi_cnfg.h | 4 +-
drivers/message/fusion/mptbase.c | 2 +-
drivers/message/fusion/mptfc.c | 2 +-
drivers/message/fusion/mptlan.c | 2 +-
drivers/message/fusion/mptsas.c | 2 +-
drivers/net/hyperv/hyperv_net.h | 1 -
drivers/net/hyperv/netvsc.c | 18 +-
drivers/net/hyperv/netvsc_drv.c | 3 -
drivers/s390/scsi/zfcp_dbf.c | 90 +-
drivers/s390/scsi/zfcp_dbf.h | 21 +-
drivers/s390/scsi/zfcp_erp.c | 194 ++--
drivers/s390/scsi/zfcp_ext.h | 16 +-
drivers/s390/scsi/zfcp_fc.c | 11 +-
drivers/s390/scsi/zfcp_fc.h | 22 +-
drivers/s390/scsi/zfcp_fsf.c | 61 +-
drivers/s390/scsi/zfcp_fsf.h | 6 +-
drivers/s390/scsi/zfcp_scsi.c | 141 ++-
drivers/s390/scsi/zfcp_sysfs.c | 5 +-
drivers/scsi/3w-9xxx.c | 5 +
drivers/scsi/3w-xxxx.c | 3 +
drivers/scsi/Kconfig | 14 +
drivers/scsi/Makefile | 3 +-
drivers/scsi/a100u2w.c | 13 +-
drivers/scsi/am53c974.c | 13 +-
drivers/scsi/cxlflash/Kconfig | 2 +-
drivers/scsi/cxlflash/Makefile | 4 +-
drivers/scsi/cxlflash/backend.h | 55 +-
drivers/scsi/cxlflash/common.h | 12 +-
drivers/scsi/cxlflash/cxl_hw.c | 13 +
drivers/scsi/cxlflash/lunmgt.c | 4 +-
drivers/scsi/cxlflash/main.c | 97 +-
drivers/scsi/cxlflash/main.h | 21 +
drivers/scsi/cxlflash/ocxl_hw.c | 1436 +++++++++++++++++++++++++++
drivers/scsi/cxlflash/ocxl_hw.h | 77 ++
drivers/scsi/cxlflash/sislite.h | 41 +-
drivers/scsi/cxlflash/superpipe.c | 23 +-
drivers/scsi/cxlflash/vlun.c | 3 +-
drivers/scsi/dpt_i2o.c | 21 +-
drivers/scsi/esas2r/esas2r_init.c | 5 +-
drivers/scsi/esas2r/esas2r_ioctl.c | 2 +-
drivers/scsi/esas2r/esas2r_main.c | 2 +-
drivers/scsi/hisi_sas/hisi_sas.h | 52 +-
drivers/scsi/hisi_sas/hisi_sas_main.c | 638 ++++++++----
drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 164 ++-
drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 284 +++---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 452 ++++++---
drivers/scsi/ipr.c | 2 +
drivers/scsi/ips.c | 78 +-
drivers/scsi/ips.h | 11 +-
drivers/scsi/isci/init.c | 3 -
drivers/scsi/iscsi_tcp.c | 1 -
drivers/scsi/libsas/sas_ata.c | 5 +
drivers/scsi/libsas/sas_discover.c | 1 +
drivers/scsi/lpfc/lpfc.h | 9 +-
drivers/scsi/lpfc/lpfc_attr.c | 124 ++-
drivers/scsi/lpfc/lpfc_bsg.c | 20 +-
drivers/scsi/lpfc/lpfc_ct.c | 10 +
drivers/scsi/lpfc/lpfc_debugfs.c | 98 +-
drivers/scsi/lpfc/lpfc_els.c | 1 -
drivers/scsi/lpfc/lpfc_hbadisc.c | 7 +-
drivers/scsi/lpfc/lpfc_hw4.h | 7 +-
drivers/scsi/lpfc/lpfc_init.c | 153 ++-
drivers/scsi/lpfc/lpfc_nportdisc.c | 35 +-
drivers/scsi/lpfc/lpfc_nvme.c | 238 +++--
drivers/scsi/lpfc/lpfc_nvme.h | 17 +-
drivers/scsi/lpfc/lpfc_nvmet.h | 6 +-
drivers/scsi/lpfc/lpfc_scsi.c | 33 +-
drivers/scsi/lpfc/lpfc_scsi.h | 2 +-
drivers/scsi/lpfc/lpfc_sli.c | 116 ++-
drivers/scsi/lpfc/lpfc_version.h | 4 +-
drivers/scsi/megaraid.c | 3 +
drivers/scsi/megaraid/megaraid_sas.h | 4 +-
drivers/scsi/megaraid/megaraid_sas_base.c | 27 +-
drivers/scsi/megaraid/megaraid_sas_fusion.c | 8 +-
drivers/scsi/mpt3sas/mpi/mpi2.h | 9 +-
drivers/scsi/mpt3sas/mpi/mpi2_cnfg.h | 30 +-
drivers/scsi/mpt3sas/mpi/mpi2_init.h | 2 +-
drivers/scsi/mpt3sas/mpi/mpi2_ioc.h | 7 +-
drivers/scsi/mpt3sas/mpt3sas_base.c | 477 ++++++---
drivers/scsi/mpt3sas/mpt3sas_base.h | 60 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.c | 33 +-
drivers/scsi/mpt3sas/mpt3sas_ctl.h | 2 +-
drivers/scsi/mpt3sas/mpt3sas_scsih.c | 491 ++++++---
drivers/scsi/mpt3sas/mpt3sas_warpdrive.c | 3 +-
drivers/scsi/mvumi.c | 20 +-
drivers/scsi/osd/osd_initiator.c | 16 +-
drivers/scsi/pm8001/pm8001_hwi.c | 2 +-
drivers/scsi/qedf/drv_fcoe_fw_funcs.c | 2 +-
drivers/scsi/qedf/drv_fcoe_fw_funcs.h | 2 +-
drivers/scsi/qedf/drv_scsi_fw_funcs.c | 2 +-
drivers/scsi/qedf/drv_scsi_fw_funcs.h | 2 +-
drivers/scsi/qedf/qedf.h | 6 +-
drivers/scsi/qedf/qedf_attr.c | 2 +-
drivers/scsi/qedf/qedf_dbg.c | 4 +-
drivers/scsi/qedf/qedf_dbg.h | 2 +-
drivers/scsi/qedf/qedf_debugfs.c | 2 +-
drivers/scsi/qedf/qedf_els.c | 35 +-
drivers/scsi/qedf/qedf_fip.c | 5 +-
drivers/scsi/qedf/qedf_hsi.h | 2 +-
drivers/scsi/qedf/qedf_io.c | 87 +-
drivers/scsi/qedf/qedf_main.c | 130 ++-
drivers/scsi/qedf/qedf_version.h | 6 +-
drivers/scsi/qla2xxx/qla_def.h | 4 +-
drivers/scsi/qla2xxx/qla_gbl.h | 3 +-
drivers/scsi/qla2xxx/qla_gs.c | 41 +-
drivers/scsi/qla2xxx/qla_init.c | 105 +-
drivers/scsi/qla2xxx/qla_os.c | 4 +
drivers/scsi/qla2xxx/qla_target.c | 192 +++-
drivers/scsi/qla2xxx/qla_target.h | 4 +-
drivers/scsi/qla2xxx/qla_version.h | 2 +-
drivers/scsi/qla2xxx/tcm_qla2xxx.c | 37 +-
drivers/scsi/qlogicpti.c | 6 +-
drivers/scsi/scsi_debugfs.c | 2 +-
drivers/scsi/scsi_devinfo.c | 31 +-
drivers/scsi/scsi_dh.c | 5 +-
drivers/scsi/scsi_error.c | 7 +
drivers/scsi/scsi_lib.c | 4 +
drivers/scsi/scsi_sysfs.c | 2 +-
drivers/scsi/scsi_transport_sas.c | 4 -
drivers/scsi/sd.h | 12 +-
drivers/scsi/sd_zbc.c | 10 -
drivers/scsi/sg.c | 2 +-
drivers/scsi/snic/snic_scsi.c | 6 +-
drivers/scsi/st.c | 6 +-
drivers/scsi/storvsc_drv.c | 85 +-
drivers/scsi/ufs/ufs-qcom.c | 2 +-
drivers/scsi/ufs/ufshcd.c | 308 +++++-
drivers/scsi/ufs/ufshcd.h | 21 +
drivers/scsi/wd719x.c | 13 +-
drivers/scsi/zorro_esp.c | 1172 ++++++++++++++++++++++
drivers/target/target_core_configfs.c | 25 +
drivers/target/target_core_file.c | 137 ++-
drivers/target/target_core_file.h | 1 +
drivers/target/target_core_internal.h | 1 +
drivers/target/target_core_pscsi.c | 26 +-
drivers/target/target_core_transport.c | 64 +-
drivers/target/target_core_user.c | 160 ++-
include/linux/hyperv.h | 12 +
include/linux/libata.h | 2 +
include/linux/log2.h | 35 +-
include/scsi/scsi_device.h | 2 +-
include/scsi/scsi_devinfo.h | 75 +-
include/target/target_core_base.h | 1 +
include/uapi/linux/target_core_user.h | 11 +-
kernel/workqueue.c | 1 +
152 files changed, 7234 insertions(+), 2017 deletions(-)
create mode 100644 Documentation/driver-api/target.rst
create mode 100644 drivers/scsi/cxlflash/ocxl_hw.c
create mode 100644 drivers/scsi/cxlflash/ocxl_hw.h
create mode 100644 drivers/scsi/zorro_esp.c
James
