On 2018-05-06 03:14, Alim Akhtar wrote:
This makes ufshcd_config_pwr_mode non-static so that other vendors
like exynos can use the same.
Signed-off-by: Seungwon Jeon <essuuj@xxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
---
drivers/scsi/ufs/ufshcd.c | 5 ++---
drivers/scsi/ufs/ufshcd.h | 2 ++
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c
index 5bfd385..68aefcd 100644
--- a/drivers/scsi/ufs/ufshcd.c
+++ b/drivers/scsi/ufs/ufshcd.c
@@ -233,8 +233,6 @@ static void ufshcd_suspend_clkscaling(struct
ufs_hba *hba);
static void __ufshcd_suspend_clkscaling(struct ufs_hba *hba);
static int ufshcd_scale_clks(struct ufs_hba *hba, bool scale_up);
static irqreturn_t ufshcd_intr(int irq, void *__hba);
-static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
- struct ufs_pa_layer_attr *desired_pwr_mode);
static int ufshcd_change_power_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *pwr_mode);
static inline bool ufshcd_valid_tag(struct ufs_hba *hba, int tag)
@@ -3969,7 +3967,7 @@ static int ufshcd_change_power_mode(struct
ufs_hba *hba,
* @hba: per-adapter instance
* @desired_pwr_mode: desired power configuration
*/
-static int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+int ufshcd_config_pwr_mode(struct ufs_hba *hba,
struct ufs_pa_layer_attr *desired_pwr_mode)
{
struct ufs_pa_layer_attr final_params = { 0 };
@@ -3987,6 +3985,7 @@ static int ufshcd_config_pwr_mode(struct ufs_hba
*hba,
return ret;
}
+EXPORT_SYMBOL_GPL(ufshcd_config_pwr_mode);
/**
* ufshcd_complete_dev_init() - checks device readiness
diff --git a/drivers/scsi/ufs/ufshcd.h b/drivers/scsi/ufs/ufshcd.h
index 013a07e..b42a5a3 100644
--- a/drivers/scsi/ufs/ufshcd.h
+++ b/drivers/scsi/ufs/ufshcd.h
@@ -805,6 +805,8 @@ extern int ufshcd_dme_set_attr(struct ufs_hba
*hba, u32 attr_sel,
u8 attr_set, u32 mib_val, u8 peer);
extern int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel,
u32 *mib_val, u8 peer);
+extern int ufshcd_config_pwr_mode(struct ufs_hba *hba,
+ struct ufs_pa_layer_attr *desired_pwr_mode);
/* UIC command interfaces for DME primitives */
#define DME_LOCAL 0
Looks good to me.
Reviewed-by: Subhash Jadavani <subhashj@xxxxxxxxxxxxxx>
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
