[PATCH 1/3] scsi: arcmsr: Add driver parameter cmd_timeout, default value is ARCMSR_DEFAULT_TIMEOUT

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



>From Ching Huang <ching2048@xxxxxxxxxxxx>

Add driver parameter cmd_timeout, default value is ARCMSR_DEFAULT_TIMEOUT

Signed-off-by: Ching Huang <ching2048@xxxxxxxxxxxx>
---

diff --git a/drivers/scsi/arcmsr/arcmsr.h b/drivers/scsi/arcmsr/arcmsr.h
index 2e51ccc..62eeef5 100755
--- a/drivers/scsi/arcmsr/arcmsr.h
+++ b/drivers/scsi/arcmsr/arcmsr.h
@@ -82,6 +82,7 @@ struct device_attribute;
 #endif
 #define	ARCMSR_HOURS			(1000 * 60 * 60 * 4)
 #define	ARCMSR_MINUTES			(1000 * 60 * 60)
+#define ARCMSR_DEFAULT_TIMEOUT		90
 /*
 **********************************************************************************
 **
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 732b5d9..f6ddaec 100755
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -95,6 +95,10 @@ static int set_date_time = 0;
 module_param(set_date_time, int, S_IRUGO);
 MODULE_PARM_DESC(set_date_time, " send date, time to iop(0 ~ 1), set_date_time=1(enable), default(=0) is disable");
 
+static int cmd_timeout = ARCMSR_DEFAULT_TIMEOUT;
+module_param(cmd_timeout, int, S_IRUGO);
+MODULE_PARM_DESC(cmd_timeout, " scsi cmd timeout(0 ~ 120 sec.), default is 90");
+
 #define	ARCMSR_SLEEPTIME	10
 #define	ARCMSR_RETRYCOUNT	12
 





[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux