Re: Regression 4.17-rc1: SSD doesn properly resume causing system hang (NULL pointer dereference)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2018-04-25 at 07:37 +0200, Paul Menzel wrote:
> Am 24.04.2018 um 23:17 schrieb Bart Van Assche:
> > On Tue, 2018-04-24 at 23:04 +0200, Paul Menzel wrote:
> > > I applied your change, and rebuilt the Linux kernel. Unfortunately, it
> > > looks like, it didn’t make a difference.
> > 
> > In that case I don't know what is causing the failure. Can you run a bisect
> > to determine which commit introduced this regression?
> 
> With `scsi_mod.use_blk_mq=n` the system resumes fine, so for to me 
> unknown reasons, that Kconfig option get selected in my Linux kernel 
> configuration. I remember having similar issues when this was enabled by 
> default in Linux 4.13-rc?, so it was just a configuration problem and 
> not a regression. Unfortunately, the Linux configuration files are not 
> under version control, so I cannot check, but it is probably my fault.
> 
> Sorry for the noise, and please tell me, what I can do to get the option 
> working on this old device.

Hello Paul,

Did the same system boot fine with a previous kernel with scsi-mq enabled?
Anyway, we would like to know what is the root cause such that this NULL
pointer dereference can be fixed. There are namely plans to remove the
legacy block layer in the not too distant future.

Thanks,

Bart.




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux