This patchset primarily adds support for the Huawei x6000 board, which includes hip07 chipset. Unfortunately, due to some board layout differences with our development board, we need to set a PHY-related register differently for optimal signal quality. As such, a signal attenuation property is added to describe the differences in the boards and allow the PHY register to be set appropriately. In addition to this above features, some misc changes are added for: - PHY linkrate sysfs interface - linkrate set function - internal abort timer timeout increase - add module device id tabe for v3 hw - register init setting changes Differences to v3: - address comments from Hannes on patch #8: https://marc.info/?l=linux-scsi&m=152033924615703&w=2 - add patch for module Id table and some register setting for v3 HW. Differences to v2: - rename dt binding property name to "hisilicon,signal-attenuation" Differences to v1: - rename dt binding property name to include "hisi-" prefix Xiang Chen (3): scsi: hisi_sas: remove unused variable hisi_sas_devices.running_req scsi: hisi_sas: Code cleanup and minor bug fixes scsi: hisi_sas: add v3 hw MODULE_DEVICE_TABLE() Xiaofei Tan (7): dt-bindings: scsi: hisi_sas: add an property of signal attenuation scsi: hisi_sas: support the property of signal attenuation for v2 hw scsi: hisi_sas: fix the issue of link rate inconsistency scsi: hisi_sas: fix the issue of setting linkrate register scsi: hisi_sas: increase timer expire of internal abort task scsi: hisi_sas: fix return value of hisi_sas_task_prep() scsi: hisi_sas: modify some register config for hip08 .../devicetree/bindings/scsi/hisilicon-sas.txt | 7 +++ drivers/scsi/hisi_sas/hisi_sas.h | 1 - drivers/scsi/hisi_sas/hisi_sas_main.c | 34 +++++----- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 13 ++-- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 62 ++++++++++++++----- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 72 ++++++++++------------ 6 files changed, 109 insertions(+), 80 deletions(-) -- 1.9.1
