From: Xiaofei Tan <tanxiaofei@xxxxxxxxxx> It is not right to set the register PROG_PHY_LINK_RATE while PHY is still enabled. So if we want to change PHY linkrate, we need to disable PHY before setting the register PROG_PHY_LINK_RATE, and then start-up PHY. This patch is to fix this issue. Signed-off-by: Xiaofei Tan <tanxiaofei@xxxxxxxxxx> Signed-off-by: John Garry <john.garry@xxxxxxxxxx> --- drivers/scsi/hisi_sas/hisi_sas_v1_hw.c | 5 +++-- drivers/scsi/hisi_sas/hisi_sas_v2_hw.c | 5 +++-- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 5 +++-- 3 files changed, 9 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c index 38bbda9..2eb8980 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v1_hw.c @@ -881,10 +881,11 @@ static void phy_set_linkrate_v1_hw(struct hisi_hba *hisi_hba, int phy_no, prog_phy_link_rate &= ~0xff; prog_phy_link_rate |= rate_mask; + disable_phy_v1_hw(hisi_hba, phy_no); + msleep(100); hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE, prog_phy_link_rate); - - phy_hard_reset_v1_hw(hisi_hba, phy_no); + start_phy_v1_hw(hisi_hba, phy_no); } static int get_wideport_bitmap_v1_hw(struct hisi_hba *hisi_hba, int port_id) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c index 67be346..bd1a48a 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v2_hw.c @@ -1611,10 +1611,11 @@ static void phy_set_linkrate_v2_hw(struct hisi_hba *hisi_hba, int phy_no, prog_phy_link_rate &= ~0xff; prog_phy_link_rate |= rate_mask; + disable_phy_v2_hw(hisi_hba, phy_no); + msleep(100); hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE, prog_phy_link_rate); - - phy_hard_reset_v2_hw(hisi_hba, phy_no); + start_phy_v2_hw(hisi_hba, phy_no); } static int get_wideport_bitmap_v2_hw(struct hisi_hba *hisi_hba, int port_id) diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 1ee95ab..8da9de7 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -1862,10 +1862,11 @@ static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no, prog_phy_link_rate &= ~0xff; prog_phy_link_rate |= rate_mask; + disable_phy_v3_hw(hisi_hba, phy_no); + msleep(100); hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE, prog_phy_link_rate); - - phy_hard_reset_v3_hw(hisi_hba, phy_no); + start_phy_v3_hw(hisi_hba, phy_no); } static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba) -- 1.9.1
