From: Michael Schmitz <schmitz@xxxxxxxxxx> Add Kconfig option and Makefile entries for new Amiga Zorro ESP SCSI driver (combining old blz1230, blz2060, cyberstorm and fastlane SCSI drivers that were removed for lack of maintenance after 2.6) Signed-off-by: Michael Schmitz <schmitzmic@xxxxxxxxx> --- drivers/scsi/Kconfig | 16 ++++++++++++++++ drivers/scsi/Makefile | 1 + 2 files changed, 17 insertions(+), 0 deletions(-) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8a739b7..c7d337f 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1462,6 +1462,22 @@ config SCSI_ZORRO7XX accelerator card for the Amiga 1200, - the SCSI controller on the GVP Turbo 040/060 accelerator. +config SCSI_ZORRO_ESP + tristate "Zorro ESP SCSI support" + depends on ZORRO && SCSI + select SCSI_SPI_ATTRS + help + Support for various ESP-based SCSI controllers on Zorro + expansion boards for the Amiga. + This includes: + - the Amiga 4091 Zorro III SCSI-2 controller, + - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller + (info at + <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>), + - the SCSI controller on the Phase5 Blizzard PowerUP 603e+ + accelerator card for the Amiga 1200, + - the SCSI controller on the GVP Turbo 040/060 accelerator. + config ATARI_SCSI tristate "Atari native SCSI support" depends on ATARI && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index fcfd28d..6f13c03 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -48,6 +48,7 @@ obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o obj-$(CONFIG_ISCSI_BOOT_SYSFS) += iscsi_boot_sysfs.o obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o obj-$(CONFIG_SCSI_ZORRO7XX) += 53c700.o zorro7xx.o +obj-$(CONFIG_SCSI_ZORRO_ESP) += esp_scsi.o zorro_esp.o obj-$(CONFIG_A3000_SCSI) += a3000.o wd33c93.o obj-$(CONFIG_A2091_SCSI) += a2091.o wd33c93.o obj-$(CONFIG_GVP11_SCSI) += gvp11.o wd33c93.o -- 1.7.0.4
