Hi Nic, Chang, > On Jan 12, 2018, at 9:28 PM, Nicholas A. Bellinger <nab@xxxxxxxxxxxxxxx> wrote: > > Hi Chang & Co, > > (Adding list + Himanshu CC') > > On Sun, 2018-01-07 at 10:21 +0000, Changlimin wrote: >> Hi, >> It seems the qla2xxx commit cause Linux no response, has not fixed in lastest version 4.15-rc6. >> https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=726b85487067d7f5b23495bc33c484b8517c4074 >> > > Thanks for reporting + including debug log. :) > >> lspci: >> 0a:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) >> 0a:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI Express HBA (rev 02) >> >> syslog: >> qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.38-k. >> qla2xxx [0000:0a:00.0]-001a: : MSI-X vector count: 32. >> qla2xxx [0000:0a:00.0]-001d: : Found an ISP2532 irq 16 iobase 0xffffb0d5cc501000. >> qla2xxx [0000:0a:00.0]-00c6:1: MSI-X: Failed to enable support with 32 vectors, using 26 vectors. >> scsi host1: qla2xxx >> qla2xxx [0000:0a:00.0]-00fb:1: QLogic HPAJ764A - HP 8Gb Dual Channel PCI-e 2.0 FC HBA. >> qla2xxx [0000:0a:00.0]-00fc:1: ISP2532: PCIe (5.0GT/s x8) @ 0000:0a:00.0 hdma+ host#=1 fw=8.03.00 (90d5). >> qla2xxx [0000:0a:00.1]-001a: : MSI-X vector count: 32. >> qla2xxx [0000:0a:00.1]-001d: : Found an ISP2532 irq 17 iobase 0xffffb0d5cc5d9000. >> qla2xxx [0000:0a:00.1]-00c6:2: MSI-X: Failed to enable support with 32 vectors, using 26 vectors. >> scsi host2: qla2xxx >> qla2xxx [0000:0a:00.1]-00fb:2: QLogic HPAJ764A - HP 8Gb Dual Channel PCI-e 2.0 FC HBA. >> qla2xxx [0000:0a:00.1]-00fc:2: ISP2532: PCIe (5.0GT/s x8) @ 0000:0a:00.1 hdma+ host#=2 fw=8.03.00 (90d5). >> qla2xxx [0000:0a:00.0]-500a:1: LOOP UP detected (8 Gbps). >> qla2xxx [0000:0a:00.1]-500a:2: LOOP UP detected (8 Gbps). >> >> The attached file is the module log. >> >> Do you have any advice? > > Quinn & Himanshu folks, any comments..? > What is the issue here? I am not clear form the snippet above. One thing I noticed that, if you are using 4.15-rc6 driver version should be 10.00.00.02-k but the snippet shows 8.07.00.38-k which tells me you might Thanks, - Himanshu
