From: Quinn Tran <quinn.tran@xxxxxxxxxx>
reduce usage of terminate exchange when command encounter
resource bottle neck. Remote initiator view it as command
drop.
Signed-off-by: Quinn Tran <quinn.tran@xxxxxxxxxx>
Signed-off-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/qla_target.c | 140 ++++++++++++++++++++------------------
1 file changed, 74 insertions(+), 66 deletions(-)
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 5695fc249b73..b23d3a187758 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -75,7 +75,8 @@ MODULE_PARM_DESC(ql2xuctrlirq,
int ql2x_ini_mode = QLA2XXX_INI_MODE_EXCLUSIVE;
-static int temp_sam_status = SAM_STAT_BUSY;
+static int qla_sam_status = SAM_STAT_BUSY;
+static int tc_sam_status = SAM_STAT_TASK_SET_FULL; /* target core */
/*
* From scsi/fc/fc_fcp.h
@@ -4275,14 +4276,14 @@ static void qlt_create_sess_from_atio(struct work_struct *work)
if (op->atio.u.raw.entry_count > 1) {
ql_dbg(ql_dbg_tgt_mgt, vha, 0xf023,
"Dropping multy entry atio %p\n", &op->atio);
- goto out_term;
+ goto out_busy;
}
sess = qlt_make_local_sess(vha, s_id);
/* sess has an extra creation ref. */
if (!sess)
- goto out_term;
+ goto out_busy;
/*
* Now obtain a pre-allocated session tag using the original op->atio
* packet header, and dispatch into __qlt_do_work() using the existing
@@ -4293,7 +4294,7 @@ static void qlt_create_sess_from_atio(struct work_struct *work)
struct qla_qpair *qpair = ha->base_qpair;
spin_lock_irqsave(qpair->qp_lock_ptr, flags);
- qlt_send_busy(qpair, &op->atio, SAM_STAT_BUSY);
+ qlt_send_busy(qpair, &op->atio, tc_sam_status);
spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
spin_lock_irqsave(&ha->tgt.sess_lock, flags);
@@ -4313,6 +4314,17 @@ static void qlt_create_sess_from_atio(struct work_struct *work)
out_term:
qlt_send_term_exchange(vha->hw->base_qpair, NULL, &op->atio, 0, 0);
kfree(op);
+ return;
+out_busy:
+ {
+ struct qla_qpair *qpair = ha->base_qpair;
+
+ spin_lock_irqsave(qpair->qp_lock_ptr, flags);
+ qlt_send_busy(qpair, &op->atio, qla_sam_status);
+ spin_unlock_irqrestore(qpair->qp_lock_ptr, flags);
+ kfree(op);
+ }
+ return;
}
/* ha->hardware_lock supposed to be held on entry */
@@ -4329,7 +4341,7 @@ static int qlt_handle_cmd_for_atio(struct scsi_qla_host *vha,
if (unlikely(tgt->tgt_stop)) {
ql_dbg(ql_dbg_io, vha, 0x3061,
"New command while device %p is shutting down\n", tgt);
- return -EFAULT;
+ return -ENODEV;
}
id.b.al_pa = atio->u.isp24.fcp_hdr.s_id[2];
@@ -4384,7 +4396,7 @@ static int qlt_handle_cmd_for_atio(struct scsi_qla_host *vha,
spin_lock_irqsave(&ha->tgt.sess_lock, flags);
ha->tgt.tgt_ops->put_sess(sess);
spin_unlock_irqrestore(&ha->tgt.sess_lock, flags);
- return -ENOMEM;
+ return -EBUSY;
}
cmd->cmd_in_wq = 1;
@@ -5485,7 +5497,6 @@ qlt_chk_qfull_thresh_hold(struct scsi_qla_host *vha, struct qla_qpair *qpair,
struct atio_from_isp *atio, uint8_t ha_locked)
{
struct qla_hw_data *ha = vha->hw;
- uint16_t status;
unsigned long flags;
if (ha->tgt.num_pend_cmds < Q_FULL_THRESH_HOLD(ha))
@@ -5493,8 +5504,7 @@ qlt_chk_qfull_thresh_hold(struct scsi_qla_host *vha, struct qla_qpair *qpair,
if (!ha_locked)
spin_lock_irqsave(&ha->hardware_lock, flags);
- status = temp_sam_status;
- qlt_send_busy(qpair, atio, status);
+ qlt_send_busy(qpair, atio, qla_sam_status);
if (!ha_locked)
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -5509,7 +5519,7 @@ static void qlt_24xx_atio_pkt(struct scsi_qla_host *vha,
struct qla_hw_data *ha = vha->hw;
struct qla_tgt *tgt = vha->vha_tgt.qla_tgt;
int rc;
- unsigned long flags;
+ unsigned long flags = 0;
if (unlikely(tgt == NULL)) {
ql_dbg(ql_dbg_tgt, vha, 0x3064,
@@ -5533,8 +5543,7 @@ static void qlt_24xx_atio_pkt(struct scsi_qla_host *vha,
"sending QUEUE_FULL\n", vha->vp_idx);
if (!ha_locked)
spin_lock_irqsave(&ha->hardware_lock, flags);
- qlt_send_busy(ha->base_qpair, atio,
- SAM_STAT_TASK_SET_FULL);
+ qlt_send_busy(ha->base_qpair, atio, qla_sam_status);
if (!ha_locked)
spin_unlock_irqrestore(&ha->hardware_lock,
flags);
@@ -5553,42 +5562,37 @@ static void qlt_24xx_atio_pkt(struct scsi_qla_host *vha,
rc = qlt_handle_task_mgmt(vha, atio);
}
if (unlikely(rc != 0)) {
- if (rc == -ESRCH) {
- if (!ha_locked)
- spin_lock_irqsave(&ha->hardware_lock,
- flags);
-
-#if 1 /* With TERM EXCHANGE some FC cards refuse to boot */
- qlt_send_busy(ha->base_qpair, atio,
- SAM_STAT_BUSY);
-#else
+ if (!ha_locked)
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ switch (rc) {
+ case -ENODEV:
+ ql_dbg(ql_dbg_tgt, vha, 0xe05f,
+ "qla_target: Unable to send command to target\n");
+ break;
+ case -EBADF:
+ ql_dbg(ql_dbg_tgt, vha, 0xe05f,
+ "qla_target: Unable to send command to target, sending TERM EXCHANGE for rsp\n");
qlt_send_term_exchange(ha->base_qpair, NULL,
atio, 1, 0);
-#endif
- if (!ha_locked)
- spin_unlock_irqrestore(
- &ha->hardware_lock, flags);
- } else {
- if (tgt->tgt_stop) {
- ql_dbg(ql_dbg_tgt, vha, 0xe059,
- "qla_target: Unable to send "
- "command to target for req, "
- "ignoring.\n");
- } else {
- ql_dbg(ql_dbg_tgt, vha, 0xe05a,
- "qla_target(%d): Unable to send "
- "command to target, sending BUSY "
- "status.\n", vha->vp_idx);
- if (!ha_locked)
- spin_lock_irqsave(
- &ha->hardware_lock, flags);
- qlt_send_busy(ha->base_qpair,
- atio, SAM_STAT_BUSY);
- if (!ha_locked)
- spin_unlock_irqrestore(
- &ha->hardware_lock, flags);
- }
+ break;
+ case -EBUSY:
+ ql_dbg(ql_dbg_tgt, vha, 0xe060,
+ "qla_target(%d): Unable to send command to target, sending BUSY status\n",
+ vha->vp_idx);
+ qlt_send_busy(ha->base_qpair, atio,
+ tc_sam_status);
+ break;
+ default:
+ ql_dbg(ql_dbg_tgt, vha, 0xe060,
+ "qla_target(%d): Unable to send command to target, sending BUSY status\n",
+ vha->vp_idx);
+ qlt_send_busy(ha->base_qpair, atio,
+ qla_sam_status);
+ break;
}
+ if (!ha_locked)
+ spin_unlock_irqrestore(&ha->hardware_lock,
+ flags);
}
break;
@@ -5671,27 +5675,31 @@ static void qlt_response_pkt(struct scsi_qla_host *vha,
rc = qlt_handle_cmd_for_atio(vha, atio);
if (unlikely(rc != 0)) {
- if (rc == -ESRCH) {
-#if 1 /* With TERM EXCHANGE some FC cards refuse to boot */
- qlt_send_busy(rsp->qpair, atio, 0);
-#else
- qlt_send_term_exchange(rsp->qpair, NULL, atio, 1, 0);
-#endif
- } else {
- if (tgt->tgt_stop) {
- ql_dbg(ql_dbg_tgt, vha, 0xe05f,
- "qla_target: Unable to send "
- "command to target, sending TERM "
- "EXCHANGE for rsp\n");
- qlt_send_term_exchange(rsp->qpair, NULL,
- atio, 1, 0);
- } else {
- ql_dbg(ql_dbg_tgt, vha, 0xe060,
- "qla_target(%d): Unable to send "
- "command to target, sending BUSY "
- "status\n", vha->vp_idx);
- qlt_send_busy(rsp->qpair, atio, 0);
- }
+ switch (rc) {
+ case -ENODEV:
+ ql_dbg(ql_dbg_tgt, vha, 0xe05f,
+ "qla_target: Unable to send command to target\n");
+ break;
+ case -EBADF:
+ ql_dbg(ql_dbg_tgt, vha, 0xe05f,
+ "qla_target: Unable to send command to target, sending TERM EXCHANGE for rsp\n");
+ qlt_send_term_exchange(rsp->qpair, NULL,
+ atio, 1, 0);
+ break;
+ case -EBUSY:
+ ql_dbg(ql_dbg_tgt, vha, 0xe060,
+ "qla_target(%d): Unable to send command to target, sending BUSY status\n",
+ vha->vp_idx);
+ qlt_send_busy(rsp->qpair, atio,
+ tc_sam_status);
+ break;
+ default:
+ ql_dbg(ql_dbg_tgt, vha, 0xe060,
+ "qla_target(%d): Unable to send command to target, sending BUSY status\n",
+ vha->vp_idx);
+ qlt_send_busy(rsp->qpair, atio,
+ qla_sam_status);
+ break;
}
}
}
--
2.12.0
