"FIB_CONTEXT_FLAG_TIMEDOUT" flag is set in aac_eh_abort to
indicate command timeout, using the same flag in reset handler
causes the command to timeout and the IO's were droped.
defined a new flag "FIB_CONTEXT_FLAG_EH_RESET" to make sure IO
is properly handled in eh_reset handler.
Signed-off-by: Prasad B Munirathnam <prasad.munirathnam@xxxxxxxxxxxxx>
---
drivers/scsi/aacraid/aacraid.h | 1 +
drivers/scsi/aacraid/linit.c | 2 +-
2 files changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h
index 403a639..b0b290f 100644
--- a/drivers/scsi/aacraid/aacraid.h
+++ b/drivers/scsi/aacraid/aacraid.h
@@ -1724,6 +1724,7 @@ struct aac_dev
#define FIB_CONTEXT_FLAG_NATIVE_HBA (0x00000010)
#define FIB_CONTEXT_FLAG_NATIVE_HBA_TMF (0x00000020)
#define FIB_CONTEXT_FLAG_SCSI_CMD (0x00000040)
+#define FIB_CONTEXT_FLAG_EH_RESET (0x00000080)
/*
* Define the command values
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 3677bef..03af5bd 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -1034,7 +1034,7 @@ static int aac_eh_bus_reset(struct scsi_cmnd* cmd)
info = &aac->hba_map[bus][cid];
if (bus >= AAC_MAX_BUSES || cid >= AAC_MAX_TARGETS ||
info->devtype != AAC_DEVTYPE_NATIVE_RAW) {
- fib->flags |= FIB_CONTEXT_FLAG_TIMED_OUT;
+ fib->flags |= FIB_CONTEXT_FLAG_EH_RESET;
cmd->SCp.phase = AAC_OWNER_ERROR_HANDLER;
}
}
--
2.7.4
