Hi, On 11/30/17, Bean Huo (beanhuo) <beanhuo@xxxxxxxxxx> wrote: > Hi, Greg > >>On Mon, Nov 27, 2017 at 11:25:47AM +0000, Bean Huo (beanhuo) wrote: >>> Hi, all >>> Is there someone knows if exists one utilis dedicated to UFS device, >>> rather >>than SCSI utils? >>> I have tried sg3-utils, but it is not convenient for the embedded >>> ARM-based >>system. >>> And also it doesn't support several UFS special command. >> >>What specific UFS commands do you need to make to the device that the >>current driver does not support? > > > There are some UFS/vendor native commands. They are not SCSI based. > UFS command means uic/dme commands?. AFAIK, many uic/dme commands need pre/post operation of SoC related. So, it would be need modify sg3-utils or another. Therefore, IMHO, I don't know why we need it. But if you still want it, You'll be need to modify/create user application and modified ufs driver for your needs. About vendor command, it's vendor specific. It'll be possible to support by sg3-utils. And it need modify too. >>And yes, this is a trick question as there are about 4 different major >> forks that >>I know of of the UFS driver in different vendor trees, all of which >> support >>different types of UFS commands :( >> >>> If we don't have this kind of tool for UFS, is it necessary for us to >>> develop a >>>ufs-utils? >> >>I doubt it, what neds to happen is getting all of the functionality that >> lives in >>these different forks all merged upstream into the in-kernel driver. Then >> I bet >>all of the needed functionality you are looking for will be there. >> > Sometimes customers tend to use user space tool to do some configuration. > And especially, for example the UFS FFU. > As i knew, in case of FFU, it's possible to support by sg_write_buffer. >>good luck! >> > Thanks ! >>greg k-h > > //Bean Huo > > WBR, Kyuho Choi
