Re: [PATCH v2 21/22] qla2xxx: Fix memory leak in dual/target mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/30/2017 04:40 AM, Himanshu Madhani wrote:
> When driver is loaded in Target/Dual mode, it creates QPair
> to support MQ and allocates resources for each QPair. This Qpair
> initialization is delayed until the FW personality is changed to
> Dual/Target mode by issuing chip reset. At the time of chip reset
> firmware is re-initilized in correct personality all the QPairs
> are initialized by sending MBC_INITIALIZE_MULTIQ (001Fh).
> 
> This patch fixes memory leak by adding check to issue
> MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue
> when the flag is set for initiator mode, and clean up QPair resources
> correctly during the driver unload. This MBX does not need to be
> issued for Target/Dual mode because chip reset will reset ISP.
> 
> Fixes: d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs")
> Cc: <stable@xxxxxxxxxxxxxxx> # 4.10+
> Signed-off-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
> ---
>  drivers/scsi/qla2xxx/qla_init.c |  4 +---
>  drivers/scsi/qla2xxx/qla_mid.c  | 18 ++++++++++--------
>  2 files changed, 11 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
> index 57b8f43c5980..58663df38627 100644
> --- a/drivers/scsi/qla2xxx/qla_init.c
> +++ b/drivers/scsi/qla2xxx/qla_init.c
> @@ -8220,9 +8220,6 @@ int qla2xxx_delete_qpair(struct scsi_qla_host *vha, struct qla_qpair *qpair)
>  	int ret = QLA_FUNCTION_FAILED;
>  	struct qla_hw_data *ha = qpair->hw;
>  
> -	if (!vha->flags.qpairs_req_created && !vha->flags.qpairs_rsp_created)
> -		goto fail;
> -
>  	qpair->delete_in_progress = 1;
>  	while (atomic_read(&qpair->ref_count))
>  		msleep(500);
> @@ -8230,6 +8227,7 @@ int qla2xxx_delete_qpair(struct scsi_qla_host *vha, struct qla_qpair *qpair)
>  	ret = qla25xx_delete_req_que(vha, qpair->req);
>  	if (ret != QLA_SUCCESS)
>  		goto fail;
> +
>  	ret = qla25xx_delete_rsp_que(vha, qpair->rsp);
>  	if (ret != QLA_SUCCESS)
>  		goto fail;
> diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c
> index 618ca272d01a..e538e6308885 100644
> --- a/drivers/scsi/qla2xxx/qla_mid.c
> +++ b/drivers/scsi/qla2xxx/qla_mid.c
> @@ -575,14 +575,15 @@ qla25xx_free_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
>  int
>  qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req)
>  {
> -	int ret = -1;
> +	int ret = QLA_SUCCESS;
>  
> -	if (req) {
> +	if (req && vha->flags.qpairs_req_created) {
>  		req->options |= BIT_0;
>  		ret = qla25xx_init_req_que(vha, req);
> +		if (ret != QLA_SUCCESS)
> +			return QLA_FUNCTION_FAILED;
>  	}
> -	if (ret == QLA_SUCCESS)
> -		qla25xx_free_req_que(vha, req);
> +	qla25xx_free_req_que(vha, req);
>  
>  	return ret;
>  }
> @@ -590,14 +591,15 @@ qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req)
>  int
>  qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp)
>  {
> -	int ret = -1;
> +	int ret = QLA_SUCCESS;
>  
> -	if (rsp) {
> +	if (rsp && vha->flags.qpairs_rsp_created) {
>  		rsp->options |= BIT_0;
>  		ret = qla25xx_init_rsp_que(vha, rsp);
> +		if (ret != QLA_SUCCESS)
> +			return QLA_FUNCTION_FAILED;
>  	}
> -	if (ret == QLA_SUCCESS)
> -		qla25xx_free_rsp_que(vha, rsp);
> +	qla25xx_free_rsp_que(vha, rsp);
>  
>  	return ret;
>  }
> 
Reviewed-by: Hannes Reinecke <hare@xxxxxxxx>

Cheers,

Hannes
-- 
Dr. Hannes Reinecke		   Teamlead Storage & Networking
hare@xxxxxxx			               +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux