Re: aic7xxx broken in 2.6.18-rc3-mm2

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, 2006-08-11 at 17:27 -0500, James Bottomley wrote:
> On Fri, 2006-08-11 at 15:11 -0700, Dave Hansen wrote:
> > My scsi card stopped being detected in 2.6.18-rc3-mm2, but works in
> > plain 2.6.18-rc3.  I bisected all the way down to the git-sas.patch.
> > I
> > then noticed that if I enable the AIC94XX driver, my card works again.
> > 
> > I'm digging through it right now, but I figured I'd post in case
> > anyone
> > else had seen this.  This error mode seems vaguely familiar as well.
> > Any ideas?
> 
> There's nothing in the driver diff that interferes with the aic7xxx ...
> my best guess would be some cockup over duplicate pci id claims ...
> what's the lspci -n output for the card?

0000:02:01.0 0100: 9005:00cf (rev 01)
0000:02:01.1 0100: 9005:00cf (rev 01)

-- Dave

-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux