Re: [PATCH v9 09/10] block, scsi: Make SCSI quiesce and resume work reliably

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 16, 2017 at 04:29:04PM -0700, Bart Van Assche wrote:
> The contexts from which a SCSI device can be quiesced or resumed are:
> * Writing into /sys/class/scsi_device/*/device/state.
> * SCSI parallel (SPI) domain validation.
> * The SCSI device power management methods. See also scsi_bus_pm_ops.
> 
> It is essential during suspend and resume that neither the filesystem
> state nor the filesystem metadata in RAM changes. This is why while
> the hibernation image is being written or restored that SCSI devices
> are quiesced. The SCSI core quiesces devices through scsi_device_quiesce()
> and scsi_device_resume(). In the SDEV_QUIESCE state execution of
> non-preempt requests is deferred. This is realized by returning
> BLKPREP_DEFER from inside scsi_prep_state_check() for quiesced SCSI
> devices. Avoid that a full queue prevents power management requests
> to be submitted by deferring allocation of non-preempt requests for
> devices in the quiesced state. This patch has been tested by running
> the following commands and by verifying that after resume the fio job
> is still running:
> 
> for d in /sys/class/block/sd*[a-z]; do
>   hcil=$(readlink "$d/device")
>   hcil=${hcil#../../../}
>   echo 4 > "$d/queue/nr_requests"
>   echo 1 > "/sys/class/scsi_device/$hcil/device/queue_depth"
> done
> bdev=$(readlink /dev/disk/by-uuid/5217d83f-213e-4b42-b86e-20013325ba6c)
> bdev=${bdev#../../}
> hcil=$(readlink "/sys/block/$bdev/device")
> hcil=${hcil#../../../}
> fio --name="$bdev" --filename="/dev/$bdev" --buffered=0 --bs=512 --rw=randread \
>   --ioengine=libaio --numjobs=4 --iodepth=16 --iodepth_batch=1 --thread \
>   --loops=$((2**31)) &
> pid=$!
> sleep 1
> systemctl hibernate
> sleep 10
> kill $pid
> 
> Reported-by: Oleksandr Natalenko <oleksandr@xxxxxxxxxxxxxx>
> References: "I/O hangs after resuming from suspend-to-ram" (https://marc.info/?l=linux-block&m=150340235201348).
> Signed-off-by: Bart Van Assche <bart.vanassche@xxxxxxx>
> Tested-by: Martin Steigerwald <martin@xxxxxxxxxxxx>
> Cc: Martin K. Petersen <martin.petersen@xxxxxxxxxx>
> Cc: Ming Lei <ming.lei@xxxxxxxxxx>
> Cc: Christoph Hellwig <hch@xxxxxx>
> Cc: Hannes Reinecke <hare@xxxxxxxx>
> Cc: Johannes Thumshirn <jthumshirn@xxxxxxx>
> ---
>  block/blk-core.c           | 42 +++++++++++++++++++++++++++++++++++-------
>  block/blk-mq.c             |  4 ++--
>  block/blk-timeout.c        |  2 +-
>  drivers/scsi/scsi_lib.c    | 40 +++++++++++++++++++++++++++++-----------
>  fs/block_dev.c             |  4 ++--
>  include/linux/blkdev.h     |  2 +-
>  include/scsi/scsi_device.h |  1 +
>  7 files changed, 71 insertions(+), 24 deletions(-)
> 
> diff --git a/block/blk-core.c b/block/blk-core.c
> index b73203286bf5..abb5095bcef6 100644
> --- a/block/blk-core.c
> +++ b/block/blk-core.c
> @@ -372,6 +372,7 @@ void blk_clear_preempt_only(struct request_queue *q)
>  
>  	spin_lock_irqsave(q->queue_lock, flags);
>  	queue_flag_clear(QUEUE_FLAG_PREEMPT_ONLY, q);
> +	wake_up_all(&q->mq_freeze_wq);
>  	spin_unlock_irqrestore(q->queue_lock, flags);
>  }
>  EXPORT_SYMBOL_GPL(blk_clear_preempt_only);
> @@ -793,15 +794,40 @@ struct request_queue *blk_alloc_queue(gfp_t gfp_mask)
>  }
>  EXPORT_SYMBOL(blk_alloc_queue);
>  
> -int blk_queue_enter(struct request_queue *q, bool nowait)
> +/**
> + * blk_queue_enter() - try to increase q->q_usage_counter
> + * @q: request queue pointer
> + * @flags: BLK_MQ_REQ_NOWAIT and/or BLK_MQ_REQ_PREEMPT
> + */
> +int blk_queue_enter(struct request_queue *q, unsigned int flags)
>  {
> +	const bool preempt = flags & BLK_MQ_REQ_PREEMPT;
> +
>  	while (true) {
> +		bool success = false;
>  		int ret;
>  
> -		if (percpu_ref_tryget_live(&q->q_usage_counter))
> +		rcu_read_lock_sched();
> +		if (percpu_ref_tryget_live(&q->q_usage_counter)) {
> +			/*
> +			 * The code that sets the PREEMPT_ONLY flag is
> +			 * responsible for ensuring that that flag is globally
> +			 * visible before the queue is unfrozen.
> +			 */
> +			if (preempt || !blk_queue_preempt_only(q)) {
> +				success = true;
> +			} else {
> +				percpu_ref_put(&q->q_usage_counter);
> +				WARN_ONCE("%s: Attempt to allocate non-preempt request in preempt-only mode.\n",
> +					  kobject_name(q->kobj.parent));
> +			}
> +		}
> +		rcu_read_unlock_sched();
> +
> +		if (success)
>  			return 0;
>  
> -		if (nowait)
> +		if (flags & BLK_MQ_REQ_NOWAIT)
>  			return -EBUSY;
>  
>  		/*
> @@ -814,7 +840,8 @@ int blk_queue_enter(struct request_queue *q, bool nowait)
>  		smp_rmb();
>  
>  		ret = wait_event_interruptible(q->mq_freeze_wq,
> -				!atomic_read(&q->mq_freeze_depth) ||
> +				(atomic_read(&q->mq_freeze_depth) == 0 &&
> +				 (preempt || !blk_queue_preempt_only(q))) ||
>  				blk_queue_dying(q));
>  		if (blk_queue_dying(q))
>  			return -ENODEV;
> @@ -1442,8 +1469,7 @@ static struct request *blk_old_get_request(struct request_queue *q,
>  	/* create ioc upfront */
>  	create_io_context(gfp_mask, q->node);
>  
> -	ret = blk_queue_enter(q, !(gfp_mask & __GFP_DIRECT_RECLAIM) ||
> -			      (op & REQ_NOWAIT));
> +	ret = blk_queue_enter(q, flags);
>  	if (ret)
>  		return ERR_PTR(ret);
>  	spin_lock_irq(q->queue_lock);
> @@ -2264,8 +2290,10 @@ blk_qc_t generic_make_request(struct bio *bio)
>  	current->bio_list = bio_list_on_stack;
>  	do {
>  		struct request_queue *q = bio->bi_disk->queue;
> +		unsigned int flags = bio->bi_opf & REQ_NOWAIT ?
> +			BLK_MQ_REQ_NOWAIT : 0;
>  
> -		if (likely(blk_queue_enter(q, bio->bi_opf & REQ_NOWAIT) == 0)) {
> +		if (likely(blk_queue_enter(q, flags) == 0)) {
>  			struct bio_list lower, same;
>  
>  			/* Create a fresh bio_list for all subordinate requests */
> diff --git a/block/blk-mq.c b/block/blk-mq.c
> index 6a025b17caac..c6bff60e6b8b 100644
> --- a/block/blk-mq.c
> +++ b/block/blk-mq.c
> @@ -386,7 +386,7 @@ struct request *blk_mq_alloc_request(struct request_queue *q, unsigned int op,
>  	struct request *rq;
>  	int ret;
>  
> -	ret = blk_queue_enter(q, flags & BLK_MQ_REQ_NOWAIT);
> +	ret = blk_queue_enter(q, flags);
>  	if (ret)
>  		return ERR_PTR(ret);
>  
> @@ -425,7 +425,7 @@ struct request *blk_mq_alloc_request_hctx(struct request_queue *q,
>  	if (hctx_idx >= q->nr_hw_queues)
>  		return ERR_PTR(-EIO);
>  
> -	ret = blk_queue_enter(q, true);
> +	ret = blk_queue_enter(q, flags);
>  	if (ret)
>  		return ERR_PTR(ret);
>  
> diff --git a/block/blk-timeout.c b/block/blk-timeout.c
> index e3e9c9771d36..1eba71486716 100644
> --- a/block/blk-timeout.c
> +++ b/block/blk-timeout.c
> @@ -134,7 +134,7 @@ void blk_timeout_work(struct work_struct *work)
>  	struct request *rq, *tmp;
>  	int next_set = 0;
>  
> -	if (blk_queue_enter(q, true))
> +	if (blk_queue_enter(q, BLK_MQ_REQ_NOWAIT | BLK_MQ_REQ_PREEMPT))
>  		return;
>  	spin_lock_irqsave(q->queue_lock, flags);
>  
> diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
> index 7c119696402c..2939f3a74fdc 100644
> --- a/drivers/scsi/scsi_lib.c
> +++ b/drivers/scsi/scsi_lib.c
> @@ -2955,21 +2955,37 @@ static void scsi_wait_for_queuecommand(struct scsi_device *sdev)
>  int
>  scsi_device_quiesce(struct scsi_device *sdev)
>  {
> +	struct request_queue *q = sdev->request_queue;
>  	int err;
>  
> +	/*
> +	 * It is allowed to call scsi_device_quiesce() multiple times from
> +	 * the same context but concurrent scsi_device_quiesce() calls are
> +	 * not allowed.
> +	 */
> +	WARN_ON_ONCE(sdev->quiesced_by && sdev->quiesced_by != current);

If the above line and comment is removed, everything is still fine,
either nested calling or concurrent calling, isn't it?

> +
> +	blk_set_preempt_only(q);
> +
> +	blk_mq_freeze_queue(q);
> +	/*
> +	 * Ensure that the effect of blk_set_preempt_only() will be visible
> +	 * for percpu_ref_tryget() callers that occur after the queue
> +	 * unfreeze even if the queue was already frozen before this function
> +	 * was called. See also https://lwn.net/Articles/573497/.
> +	 */
> +	synchronize_rcu();
> +	blk_mq_unfreeze_queue(q);
> +
>  	mutex_lock(&sdev->state_mutex);
>  	err = scsi_device_set_state(sdev, SDEV_QUIESCE);
> +	if (err == 0)
> +		sdev->quiesced_by = current;
> +	else
> +		blk_clear_preempt_only(q);
>  	mutex_unlock(&sdev->state_mutex);
>  
> -	if (err)
> -		return err;
> -
> -	scsi_run_queue(sdev->request_queue);
> -	while (atomic_read(&sdev->device_busy)) {
> -		msleep_interruptible(200);
> -		scsi_run_queue(sdev->request_queue);
> -	}
> -	return 0;
> +	return err;
>  }
>  EXPORT_SYMBOL(scsi_device_quiesce);
>  
> @@ -2990,8 +3006,10 @@ void scsi_device_resume(struct scsi_device *sdev)
>  	 */
>  	mutex_lock(&sdev->state_mutex);
>  	if (sdev->sdev_state == SDEV_QUIESCE &&
> -	    scsi_device_set_state(sdev, SDEV_RUNNING) == 0)
> -		scsi_run_queue(sdev->request_queue);
> +	    scsi_device_set_state(sdev, SDEV_RUNNING) == 0) {
> +		blk_clear_preempt_only(sdev->request_queue);
> +		sdev->quiesced_by = NULL;
> +	}
>  	mutex_unlock(&sdev->state_mutex);
>  }
>  EXPORT_SYMBOL(scsi_device_resume);
> diff --git a/fs/block_dev.c b/fs/block_dev.c
> index 07ddccd17801..c5363186618b 100644
> --- a/fs/block_dev.c
> +++ b/fs/block_dev.c
> @@ -662,7 +662,7 @@ int bdev_read_page(struct block_device *bdev, sector_t sector,
>  	if (!ops->rw_page || bdev_get_integrity(bdev))
>  		return result;
>  
> -	result = blk_queue_enter(bdev->bd_queue, false);
> +	result = blk_queue_enter(bdev->bd_queue, 0);
>  	if (result)
>  		return result;
>  	result = ops->rw_page(bdev, sector + get_start_sect(bdev), page, false);
> @@ -698,7 +698,7 @@ int bdev_write_page(struct block_device *bdev, sector_t sector,
>  
>  	if (!ops->rw_page || bdev_get_integrity(bdev))
>  		return -EOPNOTSUPP;
> -	result = blk_queue_enter(bdev->bd_queue, false);
> +	result = blk_queue_enter(bdev->bd_queue, 0);
>  	if (result)
>  		return result;
>  
> diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
> index 864ad2e4a58c..4f91c6462752 100644
> --- a/include/linux/blkdev.h
> +++ b/include/linux/blkdev.h
> @@ -956,7 +956,7 @@ extern int scsi_cmd_ioctl(struct request_queue *, struct gendisk *, fmode_t,
>  extern int sg_scsi_ioctl(struct request_queue *, struct gendisk *, fmode_t,
>  			 struct scsi_ioctl_command __user *);
>  
> -extern int blk_queue_enter(struct request_queue *q, bool nowait);
> +extern int blk_queue_enter(struct request_queue *q, unsigned int flags);
>  extern void blk_queue_exit(struct request_queue *q);
>  extern void blk_start_queue(struct request_queue *q);
>  extern void blk_start_queue_async(struct request_queue *q);
> diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
> index 82e93ee94708..6f0f1e242e23 100644
> --- a/include/scsi/scsi_device.h
> +++ b/include/scsi/scsi_device.h
> @@ -219,6 +219,7 @@ struct scsi_device {
>  	unsigned char		access_state;
>  	struct mutex		state_mutex;
>  	enum scsi_device_state sdev_state;
> +	struct task_struct	*quiesced_by;
>  	unsigned long		sdev_data[0];
>  } __attribute__((aligned(sizeof(unsigned long))));
>  
> -- 
> 2.14.2
> 

-- 
Ming



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux