[PATCH v2 1/1] bsg-lib: fix use-after-free under memory-pressure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When under memory-pressure it is possible that the mempool which backs
the 'struct request_queue' will make use of up to BLKDEV_MIN_RQ count
emergency buffers - in case it can't get a regular allocation. These
buffers are preallocated and once they are also used, they are
re-supplied with old finished requests from the same request_queue (see
mempool_free()).

The bug is, when re-supplying the emergency pool, the old requests are
not again ran through the callback mempool_t->alloc(), and thus also not
through the callback bsg_init_rq(). Thus we skip initialization, and
while the sense-buffer still should be good, scsi_request->cmd might
have become to be an invalid pointer in the meantime. When the request
is initialized in bsg.c, and the user's CDB is larger than BLK_MAX_CDB,
bsg will replace it with a custom allocated buffer, which is freed when
the user's command is finished, thus it dangles afterwards. When next a
command is sent by the user that has a smaller/similar CDB as
BLK_MAX_CDB, bsg will assume that scsi_request->cmd is backed by
scsi_request->__cmd, will not make a custom allocation, and write into
undefined memory.

Fix this by splitting bsg_init_rq() into two functions:
 - bsg_init_rq() is changed to only do the allocation of the
   sense-buffer, which is used to back the bsg job's reply buffer. This
   pointer should never change during the lifetime of a scsi_request, so
   it doesn't need re-initialization.
 - bsg_initialize_rq() is a new function that makes use of
   'struct request_queue's initialize_rq_fn callback (which was
   introduced in v4.12). This is always called before the request is
   given out via blk_get_request(). This function does the remaining
   initialization that was previously done in bsg_init_rq(), and will
   also do it when the request is taken from the emergency-pool of the
   backing mempool.

Fixes: 50b4d485528d ("bsg-lib: fix kernel panic resulting from missing allocation of reply-buffer")
Cc: <stable@xxxxxxxxxxxxxxx> # 4.11+
Reviewed-by: Christoph Hellwig <hch@xxxxxx>
Signed-off-by: Benjamin Block <bblock@xxxxxxxxxxxxxxxxxx>
---

Notes:
    I did test this on zFCP with FC CT commands send via the ioctl() and
    write() system-call. That did work fine. But I would very much
    appreciate if anyone could run this against an other HBA or even an
    other implementer of bsg-lib, such as now SAS, because I have no access
    to such hardware here.
    
    This should make no difference to the normal cases - where each request
    is allocated via slab - with- or without this patch; if I didn't miss
    anything. Only the order is a bit mixed up - the memset is done after
    the sense-allocation, so I have to buffer the sense-pointer for that.
    But otherwise there is no difference I am aware of, so it should behave
    the same (does for me).
    
    I could not reproduce the memory-pressure case here in the lab.. I
    don't see any reason why it should work now, but I am open to
    suggestions :)
    
                                                Beste Grüße / Best regards,
                                                  - Benjamin Block
    
    Changes in v2:
     - Renamed function names to reflect the function-pointer names in
       request_queue

 block/bsg-lib.c | 29 ++++++++++++++++++++++-------
 1 file changed, 22 insertions(+), 7 deletions(-)

diff --git a/block/bsg-lib.c b/block/bsg-lib.c
index c82408c7cc3c..ff5a158b22fa 100644
--- a/block/bsg-lib.c
+++ b/block/bsg-lib.c
@@ -208,20 +208,34 @@ static int bsg_init_rq(struct request_queue *q, struct request *req, gfp_t gfp)
 	struct bsg_job *job = blk_mq_rq_to_pdu(req);
 	struct scsi_request *sreq = &job->sreq;
 
-	memset(job, 0, sizeof(*job));
+	/* called right after the request is allocated for the request_queue */
 
-	scsi_req_init(sreq);
-	sreq->sense_len = SCSI_SENSE_BUFFERSIZE;
-	sreq->sense = kzalloc(sreq->sense_len, gfp);
+	sreq->sense = kzalloc(SCSI_SENSE_BUFFERSIZE, gfp);
 	if (!sreq->sense)
 		return -ENOMEM;
 
+	return 0;
+}
+
+static void bsg_initialize_rq(struct request *req)
+{
+	struct bsg_job *job = blk_mq_rq_to_pdu(req);
+	struct scsi_request *sreq = &job->sreq;
+	void *sense = sreq->sense;
+
+	/* called right before the request is given to the request_queue user */
+
+	memset(job, 0, sizeof(*job));
+
+	scsi_req_init(sreq);
+
+	sreq->sense = sense;
+	sreq->sense_len = SCSI_SENSE_BUFFERSIZE;
+
 	job->req = req;
-	job->reply = sreq->sense;
+	job->reply = sense;
 	job->reply_len = sreq->sense_len;
 	job->dd_data = job + 1;
-
-	return 0;
 }
 
 static void bsg_exit_rq(struct request_queue *q, struct request *req)
@@ -252,6 +266,7 @@ struct request_queue *bsg_setup_queue(struct device *dev, const char *name,
 	q->cmd_size = sizeof(struct bsg_job) + dd_job_size;
 	q->init_rq_fn = bsg_init_rq;
 	q->exit_rq_fn = bsg_exit_rq;
+	q->initialize_rq_fn = bsg_initialize_rq;
 	q->request_fn = bsg_request_fn;
 
 	ret = blk_init_allocated_queue(q);
-- 
2.14.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux