Hi Vivek,
Please find one comment inline below, rest look good.
Regards,
Subhash
On 2017-08-03 23:48, Vivek Gautam wrote:
Refactor ufs_qcom_power_up_sequence() to get rid of ugly
exported phy APIs and use the phy_init() and phy_power_on()
to do the phy initialization.
Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx>
---
drivers/phy/qualcomm/phy-qcom-ufs-i.h | 2 --
drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 9 +++++--
drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 9 +++++--
drivers/phy/qualcomm/phy-qcom-ufs.c | 38
++++++++--------------------
drivers/scsi/ufs/ufs-qcom.c | 36
++++++++++----------------
include/linux/phy/phy-qcom-ufs.h | 3 ---
6 files changed, 38 insertions(+), 59 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
index 94326ed107c3..495fd5941231 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
@@ -123,7 +123,6 @@ struct ufs_qcom_phy {
* struct ufs_qcom_phy_specific_ops - set of pointers to functions
which have a
* specific implementation per phy. Each UFS phy, should implement
* those functions according to its spec and requirements
- * @calibrate_phy: pointer to a function that calibrate the phy
* @start_serdes: pointer to a function that starts the serdes
* @is_physical_coding_sublayer_ready: pointer to a function that
* checks pcs readiness. returns 0 for success and non-zero for error.
@@ -132,7 +131,6 @@ struct ufs_qcom_phy {
* and writes to QSERDES_RX_SIGDET_CNTRL attribute
*/
struct ufs_qcom_phy_specific_ops {
- int (*calibrate_phy)(struct ufs_qcom_phy *phy, bool is_rate_B);
void (*start_serdes)(struct ufs_qcom_phy *phy);
int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
index af65785230b5..c39440b56b6d 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
@@ -44,7 +44,13 @@ void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct
ufs_qcom_phy *phy_common)
static int ufs_qcom_phy_qmp_14nm_init(struct phy *generic_phy)
{
- return 0;
+ struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+ bool is_rate_B = false;
+
+ if (phy_common->mode == PHY_MODE_UFS_HS_B)
+ is_rate_B = true;
+
+ return ufs_qcom_phy_qmp_14nm_phy_calibrate(phy_common, is_rate_B);
}
static int ufs_qcom_phy_qmp_14nm_exit(struct phy *generic_phy)
@@ -120,7 +126,6 @@ static int
ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
};
static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
- .calibrate_phy = ufs_qcom_phy_qmp_14nm_phy_calibrate,
.start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
.is_physical_coding_sublayer_ready =
ufs_qcom_phy_qmp_14nm_is_pcs_ready,
.set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
index 5c18c41dbdb4..5705a2d4c6d2 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
@@ -63,7 +63,13 @@ void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct
ufs_qcom_phy *phy_common)
static int ufs_qcom_phy_qmp_20nm_init(struct phy *generic_phy)
{
- return 0;
+ struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
+ bool is_rate_B = false;
+
+ if (phy_common->mode == PHY_MODE_UFS_HS_B)
+ is_rate_B = true;
+
+ return ufs_qcom_phy_qmp_20nm_phy_calibrate(phy_common, is_rate_B);
}
static int ufs_qcom_phy_qmp_20nm_exit(struct phy *generic_phy)
@@ -178,7 +184,6 @@ static int
ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
};
static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
- .calibrate_phy = ufs_qcom_phy_qmp_20nm_phy_calibrate,
.start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
.is_physical_coding_sublayer_ready =
ufs_qcom_phy_qmp_20nm_is_pcs_ready,
.set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c
b/drivers/phy/qualcomm/phy-qcom-ufs.c
index 43865ef340e2..1febe3294fe3 100644
--- a/drivers/phy/qualcomm/phy-qcom-ufs.c
+++ b/drivers/phy/qualcomm/phy-qcom-ufs.c
@@ -518,9 +518,8 @@ void ufs_qcom_phy_disable_iface_clk(struct
ufs_qcom_phy *phy)
}
}
-int ufs_qcom_phy_start_serdes(struct phy *generic_phy)
+static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy
*ufs_qcom_phy)
{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
int ret = 0;
if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
@@ -533,7 +532,6 @@ int ufs_qcom_phy_start_serdes(struct phy
*generic_phy)
return ret;
}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_start_serdes);
int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32
tx_lanes)
{
@@ -564,31 +562,8 @@ void ufs_qcom_phy_save_controller_version(struct
phy *generic_phy,
}
EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
-int ufs_qcom_phy_calibrate_phy(struct phy *generic_phy, bool
is_rate_B)
-{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
- int ret = 0;
-
- if (!ufs_qcom_phy->phy_spec_ops->calibrate_phy) {
- dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() callback is not
supported\n",
- __func__);
- ret = -ENOTSUPP;
- } else {
- ret = ufs_qcom_phy->phy_spec_ops->
- calibrate_phy(ufs_qcom_phy, is_rate_B);
- if (ret)
- dev_err(ufs_qcom_phy->dev, "%s: calibrate_phy() failed %d\n",
- __func__, ret);
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate_phy);
-
-int ufs_qcom_phy_is_pcs_ready(struct phy *generic_phy)
+static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy
*ufs_qcom_phy)
{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
-
if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready()
callback is not supported\n",
__func__);
@@ -598,7 +573,6 @@ int ufs_qcom_phy_is_pcs_ready(struct phy
*generic_phy)
return ufs_qcom_phy->phy_spec_ops->
is_physical_coding_sublayer_ready(ufs_qcom_phy);
}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_is_pcs_ready);
int ufs_qcom_phy_power_on(struct phy *generic_phy)
{
@@ -609,6 +583,14 @@ int ufs_qcom_phy_power_on(struct phy *generic_phy)
if (phy_common->is_powered_on)
return 0;
+ err = ufs_qcom_phy_start_serdes(phy_common);
+ if (err)
+ return err;
+
+ err = ufs_qcom_phy_is_pcs_ready(phy_common);
+ if (err)
+ return err;
+
Now that we are doing serdes start (and checking the PCS ready), I am
not sure we can call phy_power_on() from ufs_qcom_resume(). Please
check.
err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
if (err) {
dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c
index 44c21d5818ee..890eafeb8ad4 100644
--- a/drivers/scsi/ufs/ufs-qcom.c
+++ b/drivers/scsi/ufs/ufs-qcom.c
@@ -281,10 +281,10 @@ static int ufs_qcom_power_up_sequence(struct
ufs_hba *hba)
/* provide 1ms delay to let the reset pulse propagate */
usleep_range(1000, 1100);
- ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B);
-
+ /* phy initialization - calibrate the phy */
+ ret = phy_init(phy);
if (ret) {
- dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret =
%d\n",
+ dev_err(hba->dev, "%s: phy init failed, ret = %d\n",
__func__, ret);
goto out;
}
@@ -297,21 +297,22 @@ static int ufs_qcom_power_up_sequence(struct
ufs_hba *hba)
* voltage, current to settle down before starting serdes.
*/
usleep_range(1000, 1100);
- ret = ufs_qcom_phy_start_serdes(phy);
+
+ /* power on phy - start serdes and phy's power and clocks */
+ ret = phy_power_on(phy);
if (ret) {
- dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret =
%d\n",
+ dev_err(hba->dev, "%s: phy power on failed, ret = %d\n",
__func__, ret);
- goto out;
+ goto out_disable_phy;
}
- ret = ufs_qcom_phy_is_pcs_ready(phy);
- if (ret)
- dev_err(hba->dev,
- "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n",
- __func__, ret);
-
ufs_qcom_select_unipro_mode(host);
+ return 0;
+
+out_disable_phy:
+ ufs_qcom_assert_reset(hba);
+ phy_exit(phy);
out:
return ret;
}
@@ -1276,14 +1277,9 @@ static int ufs_qcom_init(struct ufs_hba *hba)
ufs_qcom_phy_save_controller_version(host->generic_phy,
host->hw_ver.major, host->hw_ver.minor, host->hw_ver.step);
- phy_init(host->generic_phy);
- err = phy_power_on(host->generic_phy);
- if (err)
- goto out_unregister_bus;
-
err = ufs_qcom_init_lane_clks(host);
if (err)
- goto out_disable_phy;
+ goto out_variant_clear;
ufs_qcom_set_caps(hba);
ufs_qcom_advertise_quirks(hba);
@@ -1304,10 +1300,6 @@ static int ufs_qcom_init(struct ufs_hba *hba)
goto out;
-out_disable_phy:
- phy_power_off(host->generic_phy);
-out_unregister_bus:
- phy_exit(host->generic_phy);
out_variant_clear:
ufshcd_set_variant(hba, NULL);
out:
diff --git a/include/linux/phy/phy-qcom-ufs.h
b/include/linux/phy/phy-qcom-ufs.h
index 35c070ea6ea3..0a2c18a9771d 100644
--- a/include/linux/phy/phy-qcom-ufs.h
+++ b/include/linux/phy/phy-qcom-ufs.h
@@ -31,10 +31,7 @@
*/
void ufs_qcom_phy_disable_dev_ref_clk(struct phy *phy);
-int ufs_qcom_phy_start_serdes(struct phy *phy);
int ufs_qcom_phy_set_tx_lane_enable(struct phy *phy, u32 tx_lanes);
-int ufs_qcom_phy_calibrate_phy(struct phy *phy, bool is_rate_B);
-int ufs_qcom_phy_is_pcs_ready(struct phy *phy);
void ufs_qcom_phy_save_controller_version(struct phy *phy,
u8 major, u16 minor, u16 step);
--
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
