[PATCH] sd: Limit WRITE SAME / WRITE SAME(16) w/UNMAP length for certain devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: "Ewan D. Milne" <emilne@xxxxxxxxxx>

Some devices do not support a WRITE SAME / WRITE SAME(16) with the UNMAP
bit set up to the length specified in the MAXIMUM WRITE SAME LENGTH field
in the block limits VPD page (or, the field is zero, indicating there is
no limit).  Limit the length by the MAXIMUM UNMAP LBA COUNT value.
Otherwise the command might be rejected.

Signed-off-by: Ewan D. Milne <emilne@xxxxxxxxxx>
---
 drivers/scsi/sd.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 6549e5c..fa07ac2 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -693,6 +693,7 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 	struct request_queue *q = sdkp->disk->queue;
 	unsigned int logical_block_size = sdkp->device->sector_size;
 	unsigned int max_blocks = 0;
+	u32 max_ws_blocks = sdkp->max_ws_blocks;
 
 	q->limits.discard_alignment =
 		sdkp->unmap_alignment * logical_block_size;
@@ -701,6 +702,13 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 		    sdkp->unmap_granularity * logical_block_size);
 	sdkp->provisioning_mode = mode;
 
+	/*
+	 * Some devices limit WRITE SAME / WRITE SAME(16) w/UNMAP
+	 * by MAXIMUM UNMAP LBA COUNT instead of MAXIMUM WRITE SAME LENGTH.
+	 * Use the smaller of the two values to avoid ILLEGAL REQUEST errors.
+	 */
+	max_ws_blocks = min_not_zero(max_ws_blocks, sdkp->max_unmap_blocks);
+
 	switch (mode) {
 
 	case SD_LBP_FULL:
@@ -715,17 +723,17 @@ static void sd_config_discard(struct scsi_disk *sdkp, unsigned int mode)
 		break;
 
 	case SD_LBP_WS16:
-		max_blocks = min_not_zero(sdkp->max_ws_blocks,
+		max_blocks = min_not_zero(max_ws_blocks,
 					  (u32)SD_MAX_WS16_BLOCKS);
 		break;
 
 	case SD_LBP_WS10:
-		max_blocks = min_not_zero(sdkp->max_ws_blocks,
+		max_blocks = min_not_zero(max_ws_blocks,
 					  (u32)SD_MAX_WS10_BLOCKS);
 		break;
 
 	case SD_LBP_ZERO:
-		max_blocks = min_not_zero(sdkp->max_ws_blocks,
+		max_blocks = min_not_zero(max_ws_blocks,
 					  (u32)SD_MAX_WS10_BLOCKS);
 		break;
 	}
-- 
2.1.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux