Not sure if this is where I need to post this question since it also has to deal with the raidutils apps so if its not I'd appreciate a shove in the right direction. I'm running a 2.6.17-1.2157_FC5 kernel with the raidutils 0.6 tools installed. I'm using an Adaptec 2015S RAID controller. I manually modprobed the i2o_config modules (block and core are already loaded) and then ran a raidutils -L which gives me the following: Engine connect failed: COMPATIBILITY number osdIOrequest : File /dev/dpti17 Could Not Be Opened I read somewhere about there needing to be a /dev/i20/ctl device. I don't have this, what I do have is a /dev/i2octl device. I tried symlinking /dev/i2octl to /dev/i2o/ctl and then ran raidutils again and I then get back: FailureInvalid list type for which I can find nothing on google for. Any ideas on how I can get this up and running? Thanks, Kris - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
