From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
The channel interrupt is to process all the interrupts
except PHY UP/DOWN and broadcast interrupt. So we need to
clear all the interrupts except those 3 interrupts after
processing channel interrupts.
Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index bb79b776..a8bd557 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1260,7 +1260,7 @@ static irqreturn_t int_chnl_int_v3_hw(int irq_no, void *p)
if (irq_msk & (2 << (phy_no * 4)) && irq_value0) {
hisi_sas_phy_write32(hisi_hba, phy_no,
CHL_INT0, irq_value0
- & (~CHL_INT0_HOTPLUG_TOUT_MSK)
+ & (~CHL_INT0_SL_RX_BCST_ACK_MSK)
& (~CHL_INT0_SL_PHY_ENABLE_MSK)
& (~CHL_INT0_NOT_RDY_MSK));
}
--
1.9.1
