From: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Add function to set linkrate for v3 hw.
Signed-off-by: Xiang Chen <chenxiang66@xxxxxxxxxxxxx>
Signed-off-by: John Garry <john.garry@xxxxxxxxxx>
---
drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 39 ++++++++++++++++++++++++++++++++++
1 file changed, 39 insertions(+)
diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
index 111e45c..8e4bfad 100644
--- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
+++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
@@ -1680,6 +1680,44 @@ static int hisi_sas_v3_init(struct hisi_hba *hisi_hba)
return 0;
}
+static void phy_set_linkrate_v3_hw(struct hisi_hba *hisi_hba, int phy_no,
+ struct sas_phy_linkrates *r)
+{
+ u32 prog_phy_link_rate =
+ hisi_sas_phy_read32(hisi_hba, phy_no, PROG_PHY_LINK_RATE);
+ struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
+ struct asd_sas_phy *sas_phy = &phy->sas_phy;
+ int i;
+ enum sas_linkrate min, max;
+ u32 rate_mask = 0;
+
+ if (r->maximum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = sas_phy->phy->maximum_linkrate;
+ min = r->minimum_linkrate;
+ } else if (r->minimum_linkrate == SAS_LINK_RATE_UNKNOWN) {
+ max = r->maximum_linkrate;
+ min = sas_phy->phy->minimum_linkrate;
+ } else
+ return;
+
+ sas_phy->phy->maximum_linkrate = max;
+ sas_phy->phy->minimum_linkrate = min;
+
+ min -= SAS_LINK_RATE_1_5_GBPS;
+ max -= SAS_LINK_RATE_1_5_GBPS;
+
+ for (i = 0; i <= max; i++)
+ rate_mask |= 1 << (i * 2);
+
+ prog_phy_link_rate &= ~0xff;
+ prog_phy_link_rate |= rate_mask;
+
+ hisi_sas_phy_write32(hisi_hba, phy_no, PROG_PHY_LINK_RATE,
+ prog_phy_link_rate);
+
+ phy_hard_reset_v3_hw(hisi_hba, phy_no);
+}
+
static void interrupt_disable_v3_hw(struct hisi_hba *hisi_hba)
{
struct pci_dev *pdev = hisi_hba->pci_dev;
@@ -1760,6 +1798,7 @@ static int soft_reset_v3_hw(struct hisi_hba *hisi_hba)
.phy_disable = disable_phy_v3_hw,
.phy_hard_reset = phy_hard_reset_v3_hw,
.phy_get_max_linkrate = phy_get_max_linkrate_v3_hw,
+ .phy_set_linkrate = phy_set_linkrate_v3_hw,
.dereg_device = dereg_device_v3_hw,
.soft_reset = soft_reset_v3_hw,
.get_phys_state = get_phys_state_v3_hw,
--
1.9.1
