From: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Fix bad sgl reposting after 2nd adapter reset
port issue was fixed, the hbacmd reset would take
more than 8 minutes to complete.
There were conflicting NVME SGL posting/reposting responsibilities
between lpfc_online()/lpfc_sli4_hba_setup() and
lpfc_nvme_create_localport(). The lpfc_online() causes a REPOST
on existing NVME SGLs which is not released during the fc port reset.
However, lpfc_nvme_create_localport() wants to allocate new NVME
buffers and post them. Both cancelled out each other which had a side
effect of hosing the mailbox handling that was used to remove the sgl
lists - causing multiple 60s mbx timeouts.
Fix by preserving all SGL lists over the fc port reset.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_nvme.c | 11 +++++++++--
1 file changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_nvme.c b/drivers/scsi/lpfc/lpfc_nvme.c
index 87e0743c4ace..8e7cdbd5d7d3 100644
--- a/drivers/scsi/lpfc/lpfc_nvme.c
+++ b/drivers/scsi/lpfc/lpfc_nvme.c
@@ -2181,8 +2181,15 @@ lpfc_nvme_create_localport(struct lpfc_vport *vport)
vport->localport = localport;
lport->vport = vport;
vport->nvmei_support = 1;
- len = lpfc_new_nvme_buf(vport, phba->sli4_hba.nvme_xri_max);
- vport->phba->total_nvme_bufs += len;
+
+ /* Don't post more new bufs if repost already recovered
+ * the nvme sgls.
+ */
+ if (phba->sli4_hba.nvme_xri_cnt == 0) {
+ len = lpfc_new_nvme_buf(vport,
+ phba->sli4_hba.nvme_xri_max);
+ vport->phba->total_nvme_bufs += len;
+ }
}
return ret;
--
2.13.1
