Undefined behaviour in drivers/scsi/sym53c8xx_2/sym_hipd.c:762:24

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On the parisc platform I noticed the UBSAN warning below.
Maybe nr_divisor isn't correctly initialized ?
Helge

[   18.555455] sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 68
[   18.625415] ================================================================================
[   18.726489] UBSAN: Undefined behaviour in ./drivers/scsi/sym53c8xx_2/sym_hipd.c:762:24
[   18.864911] index -1903078336 is out of range for type 'u32 [7]'
[   18.936779] CPU: 0 PID: 1 Comm: swapper Not tainted 4.13.0-rc3-32bit+ #427
[   19.019138] Backtrace:
[   19.047353]  [<10191eb4>] show_stack+0x3c/0x50
[   19.100577]  [<10ce82fc>] dump_stack+0x28/0x38
[   19.153826]  [<10771b3c>] ubsan_epilogue+0x1c/0x60
[   19.211229]  [<107722ec>] __ubsan_handle_out_of_bounds+0x68/0x80
[   19.283194]  [<10924074>] sym_hcb_attach+0xc2c/0x3204
[   19.343724]  [<107aaa38>] sba_dma_supported+0x4c/0x208
[   19.405291]  [<10911984>] sym2_probe+0xd64/0x122c
[   19.461661]  [<10501c64>] kernfs_add_one+0x328/0x354
[   19.521134] 
[   19.538916] ================================================================================
[   19.640086] sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
[   19.725169] sym0: SCSI BUS has been reset.
[   19.774192] sym0: SCSI BUS mode change from SE to SE.
[   19.837034] sym0: SCSI BUS has been reset.
[   19.886092] scsi host0: sym-2.2.3
[   25.154088] sym1: <896> rev 0x7 at pci 0000:00:0f.1 irq 68
[   25.222639] sym1: PA-RISC Firmware, ID 7, Fast-40, LVD, parity checking
[   25.308775] sym1: SCSI BUS has been reset.
[   25.357840] scsi host1: sym-2.2.3



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux