add new device ids
Signed-off-by: Ed Lin <ed.lin@xxxxxxxxxxx>
---
stex.c | 21 +++++++++++++++------
1 files changed, 15 insertions(+), 6 deletions(-)
diff -urN a/drivers/scsi/stex.c b/drivers/scsi/stex.c
--- a/drivers/scsi/stex.c 2006-07-28 05:48:26.000000000 -0400
+++ b/drivers/scsi/stex.c 2006-07-28 05:52:48.000000000 -0400
@@ -118,6 +118,9 @@
ST_MAX_TARGET_NUM = (ST_MAX_ARRAY_SUPPORTED+1),
ST_MAX_LUN_PER_TARGET = 16,
+ st_shasta = 0,
+ st_vsc = 1,
+
PASSTHRU_REQ_TYPE = 0x00000001,
PASSTHRU_REQ_NO_WAKEUP = 0x00000100,
ST_INTERNAL_TIMEOUT = 30,
@@ -275,6 +278,8 @@
unsigned int mu_status;
int out_req_cnt;
+
+ unsigned int cardtype;
};
static const char console_inq_page[] =
@@ -1043,6 +1048,8 @@
(struct status_msg *)(hba->dma_mem + MU_REQ_BUFFER_SIZE);
hba->mu_status = MU_STATE_STARTING;
+ hba->cardtype = (unsigned int) id->driver_data;
+
/* firmware uses id/lun pair for a logical drive, but lun would be
always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use
channel to map lun here */
@@ -1163,12 +1170,14 @@
}
static struct pci_device_id stex_pci_tbl[] = {
- { PCI_VENDOR_ID_PROMISE, 0x8350, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_PROMISE, 0xf350, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_PROMISE, 0x4301, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_PROMISE, 0x4302, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_PROMISE, 0x8301, PCI_ANY_ID, PCI_ANY_ID, },
- { PCI_VENDOR_ID_PROMISE, 0x8302, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0x105a, 0x8350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0xc350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0xf350, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0x4301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0x4302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0x8301, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x105a, 0x8302, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_shasta },
+ { 0x1725, 0x7250, PCI_ANY_ID, PCI_ANY_ID, 0, 0, st_vsc },
{ } /* terminate list */
};
MODULE_DEVICE_TABLE(pci, stex_pci_tbl);
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
