On Sun, 23 Jul 2006 12:19:34 -0200 Beraldo Leal <uid0@xxxxxxxxxxxxxxx> wrote: > Hi Andrew, I see your page in wikipedia about the Adaptec 9405w, I > follow the steps, but I don't see my SATA disk. > > I have debian testing in HD IDE with kernel 2.6.15. > I download the kernel 2.6.15 source. > I download your patch from your url. > I apply the patch. make menuconfig , select module Adaptec AIC94xx > SAS/SATA Support, i create a .deb, I install with dpkg -i, and I create > the initrd. > The boot is perfect, but I don' t see or I don't know to see the SATA. > My dmesg out put is in attachment. > > Thanks for any help. > Abracços, > Beraldo Leal > uid0@xxxxxxxxxxxxxxx > www.beraldoleal.org > > I'm not really sure who looks after the SAS stuff, but it sure ain't me ;) Cc's added. Probably they'll ask you to test 2.6.18-rc2-mm1, which has the latest code. We have no idea which patch you used, btw. There are many patches. > ff 20100000 00000000 00000180 0000649d 00000000 00000000 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU0: Intel P4/Xeon Extended MCE MSRs (24) available > CPU0: Thermal monitoring handled by SMI > mtrr: v2.0 (20020519) > CPU: Intel(R) Pentium(R) 4 CPU 3.40GHz stepping 03 > Checking 'hlt' instruction... OK. > ENABLING IO-APIC IRQs > ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 > checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd > Freeing initrd memory: 4756k freed > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: PCI BIOS revision 2.10 entry at 0xfd78f, last bus=10 > PCI: Using MMCONFIG > ACPI: Subsystem revision 20051216 > ACPI: Interpreter enabled > ACPI: Using IOAPIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (0000:00) > PCI: Probing PCI hardware (bus 00) > PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 > PCI: PXH quirk detected, disabling MSI for SHPC device > Boot video device is 0000:0a:04.0 > PCI: Transparent bridge - 0000:00:1e.0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG_._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1.PXHV._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 3 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 3 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 3 10 *11 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *10 11 14 15) > ACPI: PCI Interrupt Link [LNKE] (IRQs 3 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKF] (IRQs 3 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKG] (IRQs 3 10 11 14 15) *0, disabled. > ACPI: PCI Interrupt Link [LNKH] (IRQs 3 10 11 14 15) *5 > Linux Plug and Play Support v0.97 (c) Adam Belay > pnp: PnP ACPI init > pnp: PnP ACPI: found 12 devices > PnPBIOS: Disabled by ACPI PNP > SCSI subsystem initialized > PCI: Using ACPI for IRQ routing > PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report > PCI: Cannot allocate resource region 7 of bridge 0000:00:01.0 > PCI: Cannot allocate resource region 8 of bridge 0000:00:01.0 > PCI: Cannot allocate resource region 9 of bridge 0000:00:01.0 > PCI: Bridge: 0000:00:01.0 > IO window: disabled. > MEM window: disabled. > PREFETCH window: disabled. > PCI: Bridge: 0000:02:00.0 > IO window: 4000-4fff > MEM window: c0200000-c02fffff > PREFETCH window: c0600000-c06fffff > PCI: Bridge: 0000:00:1c.0 > IO window: 4000-4fff > MEM window: c0100000-c02fffff > PREFETCH window: c0600000-c06fffff > PCI: Bridge: 0000:00:1c.4 > IO window: disabled. > MEM window: c0300000-c03fffff > PREFETCH window: disabled. > PCI: Bridge: 0000:00:1c.5 > IO window: disabled. > MEM window: c0400000-c04fffff > PREFETCH window: 50000000-500fffff > PCI: Bridge: 0000:00:1e.0 > IO window: 5000-5fff > MEM window: c0500000-c05fffff > PREFETCH window: c8000000-cfffffff > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > PCI: Setting latency timer of device 0000:02:00.0 to 64 > ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.4 to 64 > ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:1c.5 to 64 > PCI: Setting latency timer of device 0000:00:1e.0 to 64 > Simple Boot Flag at 0x3c set to 0x1 > audit: initializing netlink socket (disabled) > audit(1153652738.097:1): initialized > highmem bounce pool size: 64 pages > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > io scheduler noop registered > io scheduler anticipatory registered > io scheduler deadline registered > io scheduler cfq registered > ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:01.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:01.0:pcie00] > Allocate Port Service[0000:00:01.0:pcie03] > ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.0 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.0:pcie00] > Allocate Port Service[0000:00:1c.0:pcie02] > Allocate Port Service[0000:00:1c.0:pcie03] > ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:00:1c.4 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.4:pcie00] > Allocate Port Service[0000:00:1c.4:pcie02] > Allocate Port Service[0000:00:1c.4:pcie03] > ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:00:1c.5 to 64 > assign_interrupt_mode Found MSI capability > Allocate Port Service[0000:00:1c.5:pcie00] > Allocate Port Service[0000:00:1c.5:pcie02] > Allocate Port Service[0000:00:1c.5:pcie03] > isapnp: Scanning for PnP cards... > Time: tsc clocksource has been installed. > isapnp: No Plug & Play device found > PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 > serio: i8042 AUX port at 0x60,0x64 irq 12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled > serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize > aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.2 loaded > ACPI: PCI Interrupt 0000:03:04.0[A] -> GSI 19 (level, low) -> IRQ 225 > aic94xx: found Adaptec AIC-9405W SAS/SATA Host Adapter, device 0000:03:04.0 > aic94xx: BIOS present (1,1), 1549 > aic94xx: ue num:1, ue size:88 > aic94xx: 1Found FLASH(8) manuf:1, dev_id:0xda, sec_prot:0 > aic94xx: manuf sect SAS_ADDR 5005076a01406f40 > aic94xx: manuf sect PCBA SN ORG > aic94xx: ms: num_phy_desc: 8 > aic94xx: ms: phy0: HIDDEN > aic94xx: ms: phy1: HIDDEN > aic94xx: ms: phy2: HIDDEN > aic94xx: ms: phy3: HIDDEN > aic94xx: ms: phy4: ENEBLEABLE > aic94xx: ms: phy5: ENEBLEABLE > aic94xx: ms: phy6: ENEBLEABLE > aic94xx: ms: phy7: ENEBLEABLE > aic94xx: ms: max_phys:0x4, num_phys:0x4 > aic94xx: ms: enabled_phys:0xf0 > aic94xx: ctrla: phy4: sas_addr: 5005076a01406f40, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 > aic94xx: ctrla: phy5: sas_addr: 5005076a01406f40, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 > aic94xx: ctrla: phy6: sas_addr: 5005076a01406f40, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 > aic94xx: ctrla: phy7: sas_addr: 5005076a01406f40, sas rate:0x9-0x8, sata rate:0x0-0x0, flags:0x0 > aic94xx: max_scbs:512, max_ddbs:128 > aic94xx: setting phy4 addr to 5005076a01406f40 > aic94xx: setting phy5 addr to 5005076a01406f40 > aic94xx: setting phy6 addr to 5005076a01406f40 > aic94xx: setting phy7 addr to 5005076a01406f40 > aic94xx: num_edbs:14 > aic94xx: num_escbs:2 > aic94xx: using sequencer Razor_10a1 > aic94xx: downloading CSEQ... > aic94xx: dma-ing 8192 bytes > aic94xx: verified 8192 bytes, passed > aic94xx: downloading LSEQs... > aic94xx: dma-ing 14336 bytes > aic94xx: LSEQ4 verified 14336 bytes, passed > aic94xx: LSEQ5 verified 14336 bytes, passed > aic94xx: LSEQ6 verified 14336 bytes, passed > aic94xx: LSEQ7 verified 14336 bytes, passed > aic94xx: max_scbs:446 > aic94xx: first_scb_site_no:0x20 > aic94xx: last_scb_site_no:0x1fe > aic94xx: First SCB dma_handle: 0x1fb92000 > aic94xx: device 0000:03:04.0: SAS addr 5005076a01406f40, PCBA SN ORG, 4 phys, 4 enabled phys, flash present, BIOS build 1549 > aic94xx: posting 2 escbs > aic94xx: escbs posted > scsi0 : Adaptec AIC-9405W SAS/SATA Host Adapter > aic94xx: posting 4 control phy scbs > aic94xx: enabled phys > MC: drivers/edac/edac_mc.c version edac_mc Ver: 2.0.0 Jul 22 2006 > aic94xx: control_phy_tasklet_complete: phy4, lrate:0x8, proto:0xe > aic94xx: control_phy_tasklet_complete: phy5, lrate:0x8, proto:0xe > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 7, 524288 bytes) > TCP bind hash table entries: 65536 (order: 6, 262144 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > TCP bic registered > NET: Registered protocol family 1 > NET: Registered protocol family 17 > NET: Registered protocol family 8 > aic94xx: control_phy_tasklet_complete: phy6: no device present: oob_status:0x0 > aic94xx: control_phy_tasklet_complete: phy7: no device present: oob_status:0x0 > NET: Registered protocol family 20 > Using IPI Shortcut mode > ACPI wakeup devices: > PEG EXP1 EXP5 EXP6 PCIB COM1 COM2 KBC0 MSE0 AC97 USB1 USB2 USB3 USB4 EUSB > ACPI: (supports S0 S1 S4 S5) > RAMDISK: cramfs filesystem found at block 0 > RAMDISK: Loading 4756KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/done. > VFS: Mounted root (cramfs filesystem) readonly. > aic94xx: escb_tasklet_complete: phy4: BYTES_DMAED > aic94xx: STP proto device-to-host FIS: > aic94xx: 00: 34 00 50 01 > aic94xx: 04: 01 00 00 a0 > aic94xx: 08: 00 00 00 00 > aic94xx: 0c: 01 00 00 00 > aic94xx: 10: 00 00 00 00 > aic94xx: escb_tasklet_complete: phy5: BYTES_DMAED > aic94xx: STP proto device-to-host FIS: > aic94xx: 00: 34 00 50 01 > aic94xx: 04: 01 00 00 a0 > aic94xx: 08: 00 00 00 00 > aic94xx: 0c: 01 00 00 00 > aic94xx: 10: 00 00 00 00 > sas: phy4: port event: PORTE_BYTES_DMAED > sas: phy4 added to port0, phy_mask:0x10 > sas: DOING DISCOVERY on port 0, pid:802 > sas: phy5: port event: PORTE_BYTES_DMAED > sas: phy5 added to port1, phy_mask:0x20 > sas: DOING DISCOVERY on port 1, pid:804 > sas: DONE DISCOVERY on port 0, pid:802, result:0 > Freeing unused kernel memory: 156k freed > sas: DONE DISCOVERY on port 1, pid:804, result:0 > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > input: AT Translated Set 2 keyboard as /class/input/input0 > ICH7: IDE controller at PCI slot 0000:00:1f.1 > ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 233 > ICH7: chipset revision 1 > ICH7: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0x30a0-0x30a7, BIOS settings: hda:DMA, hdb:pio > Probing IDE interface ide0... > hda: SAMSUNG SP0411N, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hda: max request size: 512KiB > hda: 78242976 sectors (40060 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100) > hda: cache flushes supported > hda: hda1 hda2 > kjournald starting. Commit interval 5 seconds > EXT3-fs: mounted filesystem with ordered data mode. > parport: PnPBIOS parport detected. > parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA] > libata version 1.20 loaded. > ahci 0000:00:1f.2: version 1.2 > ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 225 > hw_random: RNG not detected > usbcore: registered new driver usbfs > usbcore: registered new driver hub > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > Real Time Clock Driver v1.12ac > input: PC Speaker as /class/input/input1 > USB Universal Host Controller Interface driver v3.0 > mice: PS/2 mouse device common for all mice > PCI: Setting latency timer of device 0000:00:1f.2 to 64 > ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x0 impl SATA mode > ahci 0000:00:1f.2: flags: 64bit ncq pm led clo slum part > ata1: SATA max UDMA/133 cmd 0xF8904500 ctl 0x0 bmdma 0x0 irq 50 > ata2: SATA max UDMA/133 cmd 0xF8904580 ctl 0x0 bmdma 0x0 irq 50 > ata3: SATA max UDMA/133 cmd 0xF8904600 ctl 0x0 bmdma 0x0 irq 50 > ata4: SATA max UDMA/133 cmd 0xF8904680 ctl 0x0 bmdma 0x0 irq 50 > ata1: SATA link down (SStatus 0) > scsi1 : ahci > ata2: SATA link down (SStatus 0) > scsi2 : ahci > ata3: SATA link down (SStatus 0) > scsi3 : ahci > ata4: SATA link down (SStatus 0) > scsi4 : ahci > tg3.c:v3.47 (Dec 28, 2005) > ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 169 > PCI: Setting latency timer of device 0000:04:00.0 to 64 > eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:11:25:a4:7b:08 > eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[1] > eth0: dma_rwctrl[76180000] > ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 177 > PCI: Setting latency timer of device 0000:05:00.0 to 64 > eth1: Tigon3 [partno(BCM95721A211) rev 4101 PHY(5750)] (PCI Express) 10/100/1000BaseT Ethernet 00:10:18:0f:aa:99 > eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] > eth1: dma_rwctrl[76180000] > ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 58 > PCI: Setting latency timer of device 0000:00:1d.0 to 64 > uhci_hcd 0000:00:1d.0: UHCI Host Controller > uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 > uhci_hcd 0000:00:1d.0: irq 58, io base 0x00003000 > usb usb1: configuration #1 chosen from 1 choice > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 225 > PCI: Setting latency timer of device 0000:00:1d.1 to 64 > uhci_hcd 0000:00:1d.1: UHCI Host Controller > uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 > uhci_hcd 0000:00:1d.1: irq 225, io base 0x00003020 > usb usb2: configuration #1 chosen from 1 choice > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 233 > PCI: Setting latency timer of device 0000:00:1d.2 to 64 > uhci_hcd 0000:00:1d.2: UHCI Host Controller > uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 > uhci_hcd 0000:00:1d.2: irq 233, io base 0x00003040 > usb usb3: configuration #1 chosen from 1 choice > hub 3-0:1.0: USB hub found > hub 3-0:1.0: 2 ports detected > shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 > ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 58 > PCI: Setting latency timer of device 0000:00:1d.7 to 64 > ehci_hcd 0000:00:1d.7: EHCI Host Controller > ehci_hcd 0000:00:1d.7: debug port 1 > PCI: cache line size of 128 is not supported by device 0000:00:1d.7 > ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 > ehci_hcd 0000:00:1d.7: irq 58, io mem 0xc0000000 > ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 > usb usb4: configuration #1 chosen from 1 choice > hub 4-0:1.0: USB hub found > hub 4-0:1.0: 6 ports detected > Adding 979924k swap on /dev/hda1. Priority:-1 extents:1 across:979924k > EXT3 FS on hda2, internal journal > device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@xxxxxxxxxx > ACPI: Processor [CPU0] (supports 8 throttling states) > ACPI: Power Button (FF) [PWRF] > ACPI: Power Button (CM) [PWRB] > NET: Registered protocol family 10 > lo: Disabled Privacy Extensions > IPv6 over IPv4 tunneling driver > > - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
