Currently driver sets default queue_depth for VDs at 256 and JBODs based on interface type, ie., for SAS JBOD QD will be 64, for SATA JBOD QD will be 32. During performance runs with scsi-mq enabled, we are seeing better results by setting QD same as HBA queue_depth. Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx> Signed-off-by: Shivasharan S <shivasharan.srikanteshwara@xxxxxxxxxxxx> --- drivers/scsi/megaraid/megaraid_sas_base.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index 1d5ca5e..c13b605 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -1891,7 +1891,8 @@ static void megasas_set_static_target_properties(struct scsi_device *sdev, if (instance->nvme_page_size && max_io_size_kb) megasas_set_nvme_device_properties(sdev, (max_io_size_kb << 10)); - scsi_change_queue_depth(sdev, device_qd); + if (!shost_use_blk_mq(sdev->host)) + scsi_change_queue_depth(sdev, device_qd); } @@ -5915,6 +5916,9 @@ static int megasas_io_attach(struct megasas_instance *instance) host->max_lun = MEGASAS_MAX_LUN; host->max_cmd_len = 16; + if (shost_use_blk_mq(host)) + host->cmd_per_lun = host->can_queue; + /* * Notify the mid-layer about the new controller */ -- 1.8.3.1
