[PATCH 1/1] fnic:correct speed display and add support for 25,40 and 100G

[Satish Kharat <satishkh@xxxxxxxxx>]

Setting speed based on the vinc device parameter read during
linkup. Also adding support to display 25,40 and 100G

Signed-off-by: Satish Kharat <satishkh@xxxxxxxxx>
Signed-off-by: Sesidhar Baddela <sebaddel@xxxxxxxxx>
---
 drivers/scsi/fnic/fnic_fcs.c  | 24 ++++++++++++++++++++++++
 drivers/scsi/fnic/fnic_io.h   |  9 +++++++++
 drivers/scsi/fnic/fnic_main.c | 14 ++++++++++++--
 3 files changed, 45 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
index 245dcd9..d212eb5 100644
--- a/drivers/scsi/fnic/fnic_fcs.c
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -65,6 +65,30 @@ void fnic_handle_link(struct work_struct *work)
 	fnic->link_status = vnic_dev_link_status(fnic->vdev);
 	fnic->link_down_cnt = vnic_dev_link_down_cnt(fnic->vdev);
 
+	switch (vnic_dev_port_speed(fnic->vdev)) {
+	case DCEM_PORTSPEED_10G:
+		fc_host_speed(fnic->lport->host)   = FC_PORTSPEED_10GBIT;
+		fnic->lport->link_supported_speeds = FC_PORTSPEED_10GBIT;
+		break;
+	case DCEM_PORTSPEED_25G:
+		fc_host_speed(fnic->lport->host)   = FC_PORTSPEED_25GBIT;
+		fnic->lport->link_supported_speeds = FC_PORTSPEED_25GBIT;
+		break;
+	case DCEM_PORTSPEED_40G:
+	case DCEM_PORTSPEED_4x10G:
+		fc_host_speed(fnic->lport->host)   = FC_PORTSPEED_40GBIT;
+		fnic->lport->link_supported_speeds = FC_PORTSPEED_40GBIT;
+		break;
+	case DCEM_PORTSPEED_100G:
+		fc_host_speed(fnic->lport->host)   = FC_PORTSPEED_100GBIT;
+		fnic->lport->link_supported_speeds = FC_PORTSPEED_100GBIT;
+		break;
+	default:
+		fc_host_speed(fnic->lport->host)   = FC_PORTSPEED_UNKNOWN;
+		fnic->lport->link_supported_speeds = FC_PORTSPEED_UNKNOWN;
+		break;
+	}
+
 	if (old_link_status == fnic->link_status) {
 		if (!fnic->link_status) {
 			/* DOWN -> DOWN */
diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h
index c35b8f1..e0bc659 100644
--- a/drivers/scsi/fnic/fnic_io.h
+++ b/drivers/scsi/fnic/fnic_io.h
@@ -66,4 +66,13 @@ struct fnic_io_req {
 	struct completion *dr_done; /* completion for device reset */
 };
 
+enum fnic_port_speeds {
+	DCEM_PORTSPEED_NONE = 0,
+	DCEM_PORTSPEED_1G    = 1000,
+	DCEM_PORTSPEED_10G   = 10000,
+	DCEM_PORTSPEED_40G   = 40000,
+	DCEM_PORTSPEED_4x10G = 41000,
+	DCEM_PORTSPEED_25G   = 25000,
+	DCEM_PORTSPEED_100G  = 100000,
+};
 #endif /* _FNIC_IO_H_ */
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
index ba58b79..aacadbf 100644
--- a/drivers/scsi/fnic/fnic_main.c
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -176,11 +176,21 @@ static void fnic_get_host_speed(struct Scsi_Host *shost)
 
 	/* Add in other values as they get defined in fw */
 	switch (port_speed) {
-	case 10000:
+	case DCEM_PORTSPEED_10G:
 		fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
 		break;
+	case DCEM_PORTSPEED_25G:
+		fc_host_speed(shost) = FC_PORTSPEED_25GBIT;
+		break;
+	case DCEM_PORTSPEED_40G:
+	case DCEM_PORTSPEED_4x10G:
+		fc_host_speed(shost) = FC_PORTSPEED_40GBIT;
+		break;
+	case DCEM_PORTSPEED_100G:
+		fc_host_speed(shost) = FC_PORTSPEED_100GBIT;
+		break;
 	default:
-		fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+		fc_host_speed(shost) = FC_PORTSPEED_UNKNOWN;
 		break;
 	}
 }
-- 
2.7.4