[PATCH 08/15] qla2xxx: Use shadow register for ISP27XX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <quinn.tran@xxxxxxxxxx>

For ISP27XX, use shadow register to read FW provided
REQQ's consumer index. The shadow register is dma'ed
by firmware.

Signed-off-by: Quinn Tran <quinn.tran@xxxxxxxxxx>
Signed-off-by: Himanshu Madhani <himanshu.madhani@xxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_def.h    | 1 +
 drivers/scsi/qla2xxx/qla_init.c   | 1 +
 drivers/scsi/qla2xxx/qla_os.c     | 1 +
 drivers/scsi/qla2xxx/qla_target.c | 3 ++-
 4 files changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index dfa001357110..b3ba32773db4 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -3266,6 +3266,7 @@ struct qla_qpair {
 	uint32_t fw_started:1;
 	uint32_t enable_class_2:1;
 	uint32_t enable_explicit_conf:1;
+	uint32_t use_shadow_reg:1;
 
 	uint16_t id;			/* qp number used with FW */
 	uint16_t vp_idx;		/* vport ID */
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 360abede3f6b..f586f4f7dc57 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -7614,6 +7614,7 @@ struct qla_qpair *qla2xxx_create_qpair(struct scsi_qla_host *vha, int qos,
 		qpair->vha = vha;
 		qpair->qp_lock_ptr = &qpair->qp_lock;
 		spin_lock_init(&qpair->qp_lock);
+		qpair->use_shadow_reg = IS_SHADOW_REG_CAPABLE(ha) ? 1 : 0;
 
 		/* Assign available que pair id */
 		mutex_lock(&ha->mq_lock);
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 44be2c8237fd..1d66954b7e5a 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -384,6 +384,7 @@ static int qla2x00_alloc_queues(struct qla_hw_data *ha, struct req_que *req,
 	ha->base_qpair->rsp = rsp;
 	ha->base_qpair->vha = vha;
 	ha->base_qpair->qp_lock_ptr = &ha->hardware_lock;
+	ha->base_qpair->use_shadow_reg = IS_SHADOW_REG_CAPABLE(ha) ? 1 : 0;
 	/* init qpair to this cpu. Will adjust at run time. */
 	ha->base_qpair->msix = &ha->msix_entries[QLA_MSIX_RSP_Q];
 	INIT_LIST_HEAD(&ha->base_qpair->hints_list);
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 66bb4825339f..1d6cc24c0640 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -2288,7 +2288,8 @@ static int qlt_check_reserve_free_req(struct qla_qpair *qpair,
 	struct req_que *req = qpair->req;
 
 	if (req->cnt < (req_cnt + 2)) {
-		cnt = (uint16_t)RD_REG_DWORD(req->req_q_out);
+		cnt = (uint16_t)(qpair->use_shadow_reg ? *req->out_ptr :
+		    RD_REG_DWORD_RELAXED(req->req_q_out));
 
 		if  (req->ring_index < cnt)
 			req->cnt = cnt - req->ring_index;
-- 
2.12.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux